|
|
Additional reinforcement of wood elements
Janoušek, Radek ; Vejpustek,, Zdeněk (referee) ; Vaněrek, Jan (advisor)
This diploma thesis deals with the possibilities of additional reinforcement of wooden elements using different types of BFRP materials. In the practical part, an experiment of reinforcing plywood with external reinforcement using BFRP fabrics with different basis weights was performed. As part of the strength tests performed, the specimens were subjected to bending and shear stresses. To verify the bonding quality of the plywood, the bodies were exposed to the effect of elevated temperature and a delamination test was performed to determine the bonding quality of the plywood joints. The achieved values were evaluated and compared with the available literature.
|
|
|
Development of wood-based board materials applying thermal modification process
Buriánek, Vlastimil ; Pipíška,, Tomáš (referee) ; Vaněrek, Jan (advisor)
This diploma thesis deals deals with the effectiveness of polyurethane and phenol-resorcinol-formaldehyde adhesives when applied in bonded joints of thermally treated sheet materials. The thermal resistance of commercially used adhesives was analysed as part of a research activity. Furthermore, the changes in the properties of wood materials after heat treatment were described. In the practical part, the effectiveness of the used adhesives on densified birch plywood was verified with respect to the shear strength of the resulting composite. Based on the results obtained, it was proceeded to verify the effectiveness of densification on spruce plywood.
|
|
|
Innovative wood-based materials
Buriánek, Vlastimil ; Brožovský, Jiří (referee) ; Vaněrek, Jan (advisor)
This bachelor’s thesis deals with the issue of optimizing the modification process for plywood boards. Optimization consists mainly in evaluating different densification methods with different parameters of plasticization and stabilization. Psychical parameters (bulk density, swelling, water absorption) and strength parameters (bending strength, modulus of elasticity) of modified plates were chosen for the evaluation parameters. The practical part involved the verification of two thickening treatments on birch plywood.
|
|
|
Innovative wood-based materials
Buriánek, Vlastimil ; Brožovský, Jiří (referee) ; Vaněrek, Jan (advisor)
This bachelor’s thesis deals with the issue of optimizing the modification process for plywood boards. Optimization consists mainly in evaluating different densification methods with different parameters of plasticization and stabilization. Psychical parameters (bulk density, swelling, water absorption) and strength parameters (bending strength, modulus of elasticity) of modified plates were chosen for the evaluation parameters. The practical part involved the verification of two thickening treatments on birch plywood.
|
|
|
Additional reinforcement of wood elements
Janoušek, Radek ; Vejpustek,, Zdeněk (referee) ; Vaněrek, Jan (advisor)
This diploma thesis deals with the possibilities of additional reinforcement of wooden elements using different types of BFRP materials. In the practical part, an experiment of reinforcing plywood with external reinforcement using BFRP fabrics with different basis weights was performed. As part of the strength tests performed, the specimens were subjected to bending and shear stresses. To verify the bonding quality of the plywood, the bodies were exposed to the effect of elevated temperature and a delamination test was performed to determine the bonding quality of the plywood joints. The achieved values were evaluated and compared with the available literature.
|
|
|
Vliv lepidla na vlastnosti kompozitních materiálů na bázi dřeva
Martinková, Hana
This bachelor thesis deals with the comparison of the effect of adhesives, namely urea-formaldehyde adhesive with a high and low content of formaldehyde, on the physical and mechanical properties of three ply plywood beech boards. The thesis is focused on production and experimental measurement of samples of plywood and subsequent comparison of the measured results with each other and with the beech wood. In terms of measuring physical properties, it is specifically the density and moisture content. For mechanical tests and subsequent comparison, these are mainly three-point bending and shear bond strength.
|
|
| |
guest ::
