|
|
Design of production technology of shaped cover
Doležal, Václav ; Štroner, Marek (referee) ; Dvořák, Milan (advisor)
This thesis presents a design technology of forming a shaped lid focused on cutting, bending, drawing, as well as trimming and making the required holes. There is described several basic variants of sheet metal forming based on the literature. Production of holes of specified cover, for an annual production of 100 pieces of shaped lid, is solved by unconventional technologies. From subsequent economic evaluation of selected technologies is chosen an appropriate technology to minimize production costs.
|
|
|
Use of unconventional technologies in the production of a selected component
Havlínová, Denisa ; Kalivoda, Milan (referee) ; Dvořáková, Jana (advisor)
The biggest challenge during manufacturing copper part with microslit for optical spectrometer by the means of unconventional technologies was to meet specified narrow range of tolerances and reach right angles at the microslit corners. Electrical discharge machining and laser beam machining were two practically performed methos and both successfully met these tolerances. After consultation is focused ion beam also considered as suitable method for this task, while for photochemical machining is impossible to meet those narrow tolerances. Right angles were not achieved by any of tested methods. At laser cutting edges were proven defects (burrs, molten material), while we saw no negative defects on electrical discharge workpiece surface. Even after optimalization of EDM was machining time longer and there is assumed higher other production cost (tool manufacturing for every single workpiece), but still EDM seems to be more advantageous from financial and surface quality aspect. Based on theoretical research and practical manufacturing is recommend to manufacture specified component with microslit by EDM.
|
|
|
Use of unconventional technologies in the production of a selected component
Havlínová, Denisa ; Kalivoda, Milan (referee) ; Dvořáková, Jana (advisor)
The biggest challenge during manufacturing copper part with microslit for optical spectrometer by the means of unconventional technologies was to meet specified narrow range of tolerances and reach right angles at the microslit corners. Electrical discharge machining and laser beam machining were two practically performed methos and both successfully met these tolerances. After consultation is focused ion beam also considered as suitable method for this task, while for photochemical machining is impossible to meet those narrow tolerances. Right angles were not achieved by any of tested methods. At laser cutting edges were proven defects (burrs, molten material), while we saw no negative defects on electrical discharge workpiece surface. Even after optimalization of EDM was machining time longer and there is assumed higher other production cost (tool manufacturing for every single workpiece), but still EDM seems to be more advantageous from financial and surface quality aspect. Based on theoretical research and practical manufacturing is recommend to manufacture specified component with microslit by EDM.
|
|
|
Design of production technology of shaped cover
Doležal, Václav ; Štroner, Marek (referee) ; Dvořák, Milan (advisor)
This thesis presents a design technology of forming a shaped lid focused on cutting, bending, drawing, as well as trimming and making the required holes. There is described several basic variants of sheet metal forming based on the literature. Production of holes of specified cover, for an annual production of 100 pieces of shaped lid, is solved by unconventional technologies. From subsequent economic evaluation of selected technologies is chosen an appropriate technology to minimize production costs.
|
guest ::
