|
|
Plan of grid connection for small hydroelectric power plant
Miškovský, Ján ; Wasserbauer, Vojtěch (referee) ; Radil, Lukáš (advisor)
The purpose of the thesis is a plan of grid connection for a small hydroelectric power plant in Rastak. The introduction briefly analyses the scheme, MVE, description of the particular constructive parts and specified technical equipment as well. The main goals of the study were choice of suitable transformer, the proper VN substation as well as a plan of overhead power lines. Particular attention was paid to: figuring the short circuit current and mechanical strain, the best choice of electric field VN substation for MVE, the transformer connection in the point VN substation and geometrical measurement of its power line with 35 kV voltage summing up, it can be concluded that above mentioned is crucial to cooling of the transformer in Raštak.
|
|
|
Mechanical Design of 110 kV Overhead Line
Guliš, Tomáš ; Sýkora, Martin (referee) ; Orságová, Jaroslava (advisor)
When designing overhead lines we must respect many influences that act on it. These are electrical effects and mechanical effects, caused in normal conditions by wind, frost and temperature. This bachelor’s thesis is mainly focused on comparison of calculation of separate load cases and comparison of parameters obtained by mechanical calculation of particular overhead line according to standards ČSN 33 3300 and ČSN EN 50341-1.
|
|
|
Graphene Field Effect Transistor Properties Modulation Via Mechanical Strain Induced By Micro-Cantilever
Brodský, Jan
This work presents a new method, which enables the electrical characterization ofgraphene monolayer with induced mechanical strain. The device is a combination oftwo-dimensional field effect transistor (2DFET) and a MEMS cantilever, both of which can be usedto alter graphene properties. The first method applies external electric field to the graphenemonolayer. The second method is based on mechanical bending of the cantilever by external force,which induces mechanical strain in the characterized layer. By sweeping the gate voltage (VGS) inrange from – 50 V to + 50 V and measuring the current between drain and source (IDS) with fixeddrain-source voltage (VDS) at 1 V, Dirac point of graphene is found at ≈ 9.3 V of VGS. After bendingof the cantilever, the sweep is performed again. The induced strain shifts the position of the Diracpoint by ≈ 1.3 V to VGS = 8 V. Because the fabrication process is compatible with silicon technology,this method brings new possibilities in graphene strain engineering.
|
|
|
Plan of grid connection for small hydroelectric power plant
Miškovský, Ján ; Wasserbauer, Vojtěch (referee) ; Radil, Lukáš (advisor)
The purpose of the thesis is a plan of grid connection for a small hydroelectric power plant in Rastak. The introduction briefly analyses the scheme, MVE, description of the particular constructive parts and specified technical equipment as well. The main goals of the study were choice of suitable transformer, the proper VN substation as well as a plan of overhead power lines. Particular attention was paid to: figuring the short circuit current and mechanical strain, the best choice of electric field VN substation for MVE, the transformer connection in the point VN substation and geometrical measurement of its power line with 35 kV voltage summing up, it can be concluded that above mentioned is crucial to cooling of the transformer in Raštak.
|
|
|
Mechanical Design of 110 kV Overhead Line
Guliš, Tomáš ; Sýkora, Martin (referee) ; Orságová, Jaroslava (advisor)
When designing overhead lines we must respect many influences that act on it. These are electrical effects and mechanical effects, caused in normal conditions by wind, frost and temperature. This bachelor’s thesis is mainly focused on comparison of calculation of separate load cases and comparison of parameters obtained by mechanical calculation of particular overhead line according to standards ČSN 33 3300 and ČSN EN 50341-1.
|
guest ::
