|
|
Design of the Flat Plate Slab
Krejčová, Jana ; Šulák,, Pavel (referee) ; Švaříčková, Ivana (advisor)
Bachelor thesis describes the design and assessment of monolithic concrete, locally supported roof structures of parking place and ramp, elaboration of shape and reinforcemenet drawings of selected structural element. The work also includes the teoretical part dealing with measures for buildings located in the gap. Calculation of internal forces was performed by komputer program SCIA Engineer in two different models. It was control by simplified method of summary moments and results were compared.
|
|
|
Office Block in Blansko
Zouhar, Martin ; Vlach, František (referee) ; Kolář, Radim (advisor)
The solution of the diploma thesis is the office block in Blansko. Building is suggested for using as insurance company. This building is located in a particular territory which had precisely limited the possibilities of the construction. There are three aboveground floors. The building is designed like reinforced concrete frame with complete masonry type THERM. The building is built on drilled piles that are connected fundamental grate. The facade is made as ceramic aired facade. The building has a flat roof with classical succession layer and is stabilized by gravel. The building is designed for fifty people.
|
|
|
Medical center Hlinsko
Pilný, Ondřej ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
This diploma thesis deals with the design and elaboration process of a project documentation of medical center in city Hlinsko. New building is situated in the northern part of the city in the area determined for constructions of public infrastructure. It´s a four-floor object with partial basement and slant mansard and flat vegetative roof.Object is based on foundation strips and footings made from reinforced concrete.The bearing and internal walls are designed from KALKSANDSTEIN lime sand blocks.The beams and collums are used in the placed designed with open disposition.The ceiling in 1.PP is designed as reinforced concrete for securing fire safety.The rest od ceiling constructions is designed from prestressed concrete panels SPIROLL,with exception in 4.NP,where the ceiling constructions are made from solid roof system YTONG KOMFORT,which is layed on frame system made of steel and reinforced concrete.The peripheral walls of 1.PP are made from lost formwork, which is insulated with extruded polystyrene.The walls in floors above ground are insulated with combination of external thermal insulation system (ETICS) and ventilated facade with CEMBRIT SOLID and PATINA facade cladding panels. The building is functionally divided into several part.Cafe, pharmacy, ambulance and medical center, each with it´s own entrance.Pharmacy is equipped with shop, medicine mixer and storage.Ambulance is equipped with garage slots, background for employees, room of crisis preparedness and operating center.Medical centrum is equipped with emergency, RTG, operating theater, rehabilitations and other types of examination rooms.Each examination room is equipped with waiting room.For more comfort the center has a background for employees.The whole object is designed with forced air exchange. Designed object is barrier-free.In front of the building is situated parking slots for cars, motorbikes and ambulances.Total number of slots is 74 places, which 5 is designed for disabled people.
|
|
|
Wellness hotel "Na Ovčačce" - Svatý Kopeček u Olomouce
Spurný, Martin ; Klvaňa, Jiří (referee) ; Eliáš, Luboš (advisor)
The project is newly built wellness hotel in the cadastral Svatý Kopeček, the town of Olomouc, district Olomouc. The house is in a secluded street in Darwin. On the territory are restrictions concerning the parameters solved object. Notably the location, number of floors and the percentage of stopping. This is a three-storey, basement building with a flat roof. The building is based on the footings of plain concrete and reinforced concrete footings. Supporting, peripheral and partition walls are designed from ceramic blocks POROTHERM in the upper floors of concrete formwork and fittings in the basement. Ceiling structure is designed using locally supported reinforced concrete slabs. The entire building is divided into several sections. The 1s there is an underground garage and wellness. In 1.NP is a restaurant and facilities associated with the operation of the restaurant and hotel. In 2.NP and 3.NP are single rooms. Total capacity is 155 people and has 16 employees. To the building are three main entrances. Two of them are designed as public entrance to the restaurant and hotel. The third is the entrance for staff and supplies. Among other inputs that lead from the exterior of the building is the entrance to the restaurant terrace. Another entry is possible from the underground garage to wllnessu. The proposed facility is designed wheelchair. Before the building is designed parking for 27 cars and underground garage for 44 cars. Five of parking places are for disabled people.
|
|
|
Analysis of behaviour of reinforced concrete slab
Kubínek, Michal ; Bažant, Zdeněk (referee) ; Zich, Miloš (advisor)
Bachelor thesis describes the analysis of behavior of existing reinforced concrete slab, locally supprorted, ceiling in hospital including 2nd limit state. Calculation od internal forces was made by computer program SCIA Engineer. Several models were made, model with best behavior due to real construction was used for dimensioning. Each model was compared with manual calculation by equivalent frame analysis. After finding inconvenient deflection, especially due to connected construction, new design was made. Thickness of slab was increased and new design of reinforcement was made. New construction was verified for both limit states.
|
|
|
Sports centre Polička
Svoboda, Jan ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
This thesis deals with the design and elaboration process of a project documentation of a sports centre. The designed sports centre building is situated in the southern part of the town of Polička, in the area determined for sports and free time activities complexes and areas. It is a two-floor, non-cellar, flat-roof building. It is based on plain concrete strip foundations and reinforced concrete foundation footing. The bearing, peripheral and partition walls are designed from POROTHERM hollow clay blocks. Reinforced concrete columns are designated in open disposition areas. The ceiling construction is made from SPIROLL pre-stressed concrete floor slabs and point-supported reinforced concrete slabs. The peripheral walls of the first aboveground floor are insulated with external thermal insulation system with a protective gabion facade. The peripheral wall thermal insulation in a bowling restaurant and gym halls extension is designed from a ventilated facade with CEMBRIT METRO facade cladding panels. The building is functionally divided into two main parts with a shared entrance. The sports centre with gyms and other sports facilities form the first part. Three squash courts, a mini-football piste, a special room for spinning and alpinning, a room for group exercising and cloakrooms with sanitary facilities are designed within one part of the sports centre. A restaurant with a bowling area and a kitchen with storerooms and other facilities for employees form the second part. The designed complex is barrier-free. There is aimed to be a car park for fifty cars, four motorbikes and a bus in front of the building. Three parking places are for disabled people.
|
|
|
Administration Building
Černota, Tomáš ; Šulák, Pavel (referee) ; Jeneš, Rostislav (advisor)
This Diploma thesis is focused on design monolithic concrete construction of multi-storey administrative builiding including its foundation. The slab construction over the first floor is designed like locally supported. Calculation of internal forces is made by computer software called Dlubal RFEM. Results of internal forces are checked by simplified method.
|
|
|
Reinforced concrete structure of a administrative building
Večeřa, František ; Buřič, Pavel (referee) ; Šulák, Pavel (advisor)
Diploma thesis deals with the design of a carrier structure of an administrative building. It is a new building, which is located in the city of Brno. The building is solved as a reinforced concrete skeleton with stiffening core. There ares five overground floors. Thesis is focused on the design and the static assessment of selected parts of the building. It includes a drawing documentation.
|
|
| |
|
|
Medical center Hlinsko
Pilný, Ondřej ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
This diploma thesis deals with the design and elaboration process of a project documentation of medical center in city Hlinsko. New building is situated in the northern part of the city in the area determined for constructions of public infrastructure. It´s a four-floor object with partial basement and slant mansard and flat vegetative roof.Object is based on foundation strips and footings made from reinforced concrete.The bearing and internal walls are designed from KALKSANDSTEIN lime sand blocks.The beams and collums are used in the placed designed with open disposition.The ceiling in 1.PP is designed as reinforced concrete for securing fire safety.The rest od ceiling constructions is designed from prestressed concrete panels SPIROLL,with exception in 4.NP,where the ceiling constructions are made from solid roof system YTONG KOMFORT,which is layed on frame system made of steel and reinforced concrete.The peripheral walls of 1.PP are made from lost formwork, which is insulated with extruded polystyrene.The walls in floors above ground are insulated with combination of external thermal insulation system (ETICS) and ventilated facade with CEMBRIT SOLID and PATINA facade cladding panels. The building is functionally divided into several part.Cafe, pharmacy, ambulance and medical center, each with it´s own entrance.Pharmacy is equipped with shop, medicine mixer and storage.Ambulance is equipped with garage slots, background for employees, room of crisis preparedness and operating center.Medical centrum is equipped with emergency, RTG, operating theater, rehabilitations and other types of examination rooms.Each examination room is equipped with waiting room.For more comfort the center has a background for employees.The whole object is designed with forced air exchange. Designed object is barrier-free.In front of the building is situated parking slots for cars, motorbikes and ambulances.Total number of slots is 74 places, which 5 is designed for disabled people.
|
guest ::
