|
| |
|
| |
|
|
New methods for inner rotary surfaces finishing
Kazdera, Tomáš ; Zemčík, Oskar (referee) ; Zemčík, Oskar (advisor)
Content of the text deals with the methods of finalizing the internal surfaces of revolution. The paper discussed the theory most widely used machining methods that are commonly used in engineering practice. For each methods, are given the tools achieved surface roughness and geometric tolerances. The instruments are assigned to the machine on which the finishing operations are undertaken.
|
|
|
Design of the finishing machine for rolling bearing's elements
Cagaš, Radek ; Křenek, Miloš (referee) ; Košťál, David (advisor)
The thesis deals with the design of the device that is used to improve the quality of the surface of spherical rollers. Spherical rollers are used for the measuring of the conditions in the EHD contact. The high roughness and waviness of the spherical rollers’ surface is a problem. Several machining methods are described in the theoretical part. The overview in theoretical part has been used for choice of the machining methods (lapping and abrasive polishing). The spherical rollers‘ machining system, its construction, electronics and control systems are described in the next section. The last part is focused on testing of assembled device, and on checking its functionality. The desired roughness of the spherical rollers' surface, suitable for successful interferometric measurement, was achieved by combining the selected machining methods. The roughness and waviness achieved was Ra0.01 micron Wa0.022 microns.
|
|
|
Analysis of machining finishing methods
Urban, Martin ; Chladil, Josef (referee) ; Osička, Karel (advisor)
This diploma thesis deals with the analysis of finishing machining methods. The work describes the technologies of grinding, honing, lapping, polishing, tumbling and superfinishing. Furthermore, the residual surface tension after the superfinishing method is analyzed and two possible methods of its measurement are described. An experiment was also performed in which the finishing processes for the bearing spherical roller for axial spherical roller bearing 29434EJ-3, the bearing spherical roller for double row spherical roller bearing 23164CJ-3 and the inner bearing ring for double row spherical roller bearing 22224EKJ N7-2 were described. Six surface roughness measurements were then performed on the surfaces of these components. For the 23164CJ-3 barrel, the mean arithmetic deviation Ra of the profile ranged between 0.59 and 0.70 µm, for the 29434EJ-3 barrel, the Ra value ranged between 0.26 and 0.31 µm, and for the 22224EKJ N7-2 inner bearing ring, between 0.22 to 0.28 m.
|
|
|
Production of the Cylinder into the Injection Unit
Lexa, Josef ; Fiala, Zdeněk (referee) ; Kalivoda, Milan (advisor)
This work mainly focuses on the manufacture of the cylinder of injection unit as one of the two major components to the element and the injection unit to the injector pump before and after the heat treatment relative to the two alternatives of production, concentrating on the alternative of production on machining center. There are mentioned as the subsequent and finishing operations such as well as final assembly including mounting with a functional commissioning into the pump. There is also mentioned a production of samples of cylinder of injection unit, the proposals for improving and ecology of the whore production.
|
|
|
Modern cutting finishing methods and their use
Vičar, David ; Polzer, Aleš (referee) ; Píška, Miroslav (advisor)
This thesis deals with a summary of today's methods of finish machining and their inclusion in modern engineering production. It primarily focuses on technological characteristics of some basic methods - conventional and also unconventional. Furthermore, the thesis deals with machinery and tools used in these technologies, the advantages and disadvantages of various methods and their achieved parameters.
|
|
|
Modern methods in spur gearing production.
Kopečný, Libor ; Zemčík, Oskar (referee) ; Zemčík, Oskar (advisor)
The division and comparison of modern methods of production of spur gearings. The introduction is focused on the characteristics and description of cog wheels. Furthermore, the types of gearing and gear mechanisms are introduced. The main part of the text deals with individual ways of a production of spur gearings including finishing methods. The following part of this work describes the importance and possibilities of heat and chemical-heat gearing production. In the last chapters, the evaluation and achieved results of individual technologies of gearing production are introduced.
|
|
|
Roller burnishing tools in engineering.
Henzl, David ; Zemčík, Oskar (referee) ; Zemčík, Oskar (advisor)
This bachelor work deals with chipless technology of roller burnishing and tools with bearing on roller burnishing of circular orifices and back-to back surfaces. In the first part of the work elementary conections concerned with finishing and hardening of machine components by roller burnishing are explained. In the next part the classification of tools produced by German company Baublies AG is realised. In the following part there are examples of roller burnishing method utilization in the machine industry. Hereafter, the technical – economical evaluation and comparation with conventional methods of finishing such as lapping, honing, superfinishing, polishing, grinding, core – drilling and reaming, boring work, diamond burnishing and shot peening is realised. In the conclusion of the work the assumptions for the future are given.
|
|
|
Modern cutting finishing methods of outer surfaces
Laňka, Lubomír ; Sliwková, Petra (referee) ; Píška, Miroslav (advisor)
This master`s thesis is focused on modern cutting finishing methods of outer surfaces. In the first part the cutting finishing technologies of outer surfaces are analysed, which is followed by a description of modern finishing methods from the fine machining up-to the nano-machining. The experimental part includes the analysis of surface roughness during front turning of a dural disc and the study of magnitudes of forces during its longitudinal turning. The thesis contains technological-economic evaluation of the achieved results.
|
guest ::
