|
|
Study of volatile hydrocarbon decomposition in non-thermal plasma of gliding arc at atmospheric pressure
Töröková, Lucie ; Rašková, Zuzana (referee) ; Kozáková, Zdenka (advisor)
Diploma thesis deals with gliding arc discharge in non-equilibrium plasma, its properties and usage for dissociation of volatile organic compounds. Plasma techniques create a perspective alternative to classical methods such as adsorption, biofilters, thermal processes, freezing and condensation. The method used for analysis of dissociation products is described in the theoretical part as well. Method is gas chromatography and it is combined with mass spectroscopy. The experimental part contains the overall description of GlidArc reactor where volatile organic compounds were dissociated. The volatile organic compound is brought into the reactor from the reservoir by carrier gas (nitrogen); synthetic air was used as working gas. The reactor is connected to the device for sampling. This device has several openings for sampling by SPME fibre method, sorption tubes method and a special opening for probe entry from the device Testo 350 M/XL, which enables instant analysis of low-molecular compounds. GC-MS was used for determination of high-molecular products of dissociation. Products sorbed on SPME fibres were analysed directly, compounds sorbed by active carbon were extracted by carbon disulphide. Samples obtained using SPME fibres were analysed. The major products of the dissociaton were found due to this analysis, those major products are in the case of hexane: pentanal, 4 methyl-3-pentanal, 2-butoxy-ethanol, pentane a 2-hexene. Major products detected when dissociating cyclohexane were: l,3-dimethyl-butane, propanal, cyklohexanone, 5-hexenal a 2-pentyn-1-ol. Major products of xylene dissociation were methyl-benzene, benzaldehyde, 4-methyl-benzaldehyde, 1-nitroethyl-benzene a benzenmethanol. After analysis obtained using sorption tubes showed that mainly the dissociated compound was sorbed, but the products of the dissociation were presented in too low concentration for an adequate analysis. For that reason the sorption tubes were used only for quantitative determination of the compounds depending on the power supply. The dependence of the dissociation of the compounds on the power supply was observed using SPME fibres which were used for quantitative determination. The Results obtained by both obtained techniques were almost in accordance. Speaking of low-molecular compounds, dissociation of all compounds gave the same products, i.e. carbon dioxide, hydrogen, nitrogen oxide, nitrogen dioxide and water. The results show that the dissociation of VOC gives - besides many potentially dangerous dissociation products - significant amounts of nitrogen oxides which is harmful to the environment. Hence it is necessary to be concerned with problems studied in the future mainly with respect to limitation of NOx generation. It will be possible to optimalize the conditions of the VOC dissociation on the basis of future kinetic analysis.
|
|
|
Study of plasma effects on quinine solutions
Procházková, Michaela ; Dzik, Petr (referee) ; Kozáková, Zdenka (advisor)
This diploma thesis focuses on quinine solutions and quality of these solutions after applying plasma discharge. These electric discharges can be used to destroy some substances from the water. The theoretical part is focused on description of electric discharges in liquids and on the properties of quinine. In the experimental part, the properties of quinine solutions containing different electrolytes were analysed by UV-VIS spectrophotometer and fluorescence spectroscopy. Two different types of configurations of plasma discharges in liquids were used. Solutions were compared on the base of different concentration of quinine, different electrolytes, different configurations of plasma discharges and pH values of the solutions. Furthermore, the experimental work focuses on quinine solutions with the sodium nitrate. The time instability of the solutions was analysed. Also, the influence of the solution age and different types of the plasma discharge on the excitation and emission spectra of quinine were investigated.
|
|
|
Study of DC discharge products in CO2 + N2 mixture
Kostyleva, Kseniia ; Töröková, Lucie (referee) ; Mazánková, Věra (advisor)
The bachelor´s thesis is focused on the study of products of DC glow discharge in nitrogen, methane and carbon dioxide gas mixtures. Different diagnostic techniques were used for measure their concentrations (PTR-MS-TOF mass spectrometer and a TESTO 350 M/XL instrument). The theoretical part describes principle of mass spectrometry, types of analysers and ionizers. There are also described various types of electrical discharges, including the Glid-Arc discharge, which was used during the measurement. In addition, one of the theories of the origins of life is described. There is also description of Titan's atmosphere, which was chosen due to the similarity of its atmosphere with the atmosphere of the early Earth. In the experimental part the discharge products and their concentration under different experimental conditions are shown.
|
|
|
Study of plasma effects on quinine solutions
Procházková, Michaela ; Dzik, Petr (referee) ; Kozáková, Zdenka (advisor)
This diploma thesis focuses on quinine solutions and quality of these solutions after applying plasma discharge. These electric discharges can be used to destroy some substances from the water. The theoretical part is focused on description of electric discharges in liquids and on the properties of quinine. In the experimental part, the properties of quinine solutions containing different electrolytes were analysed by UV-VIS spectrophotometer and fluorescence spectroscopy. Two different types of configurations of plasma discharges in liquids were used. Solutions were compared on the base of different concentration of quinine, different electrolytes, different configurations of plasma discharges and pH values of the solutions. Furthermore, the experimental work focuses on quinine solutions with the sodium nitrate. The time instability of the solutions was analysed. Also, the influence of the solution age and different types of the plasma discharge on the excitation and emission spectra of quinine were investigated.
|
|
|
Study of DC discharge products in CO2 + N2 mixture
Kostyleva, Kseniia ; Töröková, Lucie (referee) ; Mazánková, Věra (advisor)
The bachelor´s thesis is focused on the study of products of DC glow discharge in nitrogen, methane and carbon dioxide gas mixtures. Different diagnostic techniques were used for measure their concentrations (PTR-MS-TOF mass spectrometer and a TESTO 350 M/XL instrument). The theoretical part describes principle of mass spectrometry, types of analysers and ionizers. There are also described various types of electrical discharges, including the Glid-Arc discharge, which was used during the measurement. In addition, one of the theories of the origins of life is described. There is also description of Titan's atmosphere, which was chosen due to the similarity of its atmosphere with the atmosphere of the early Earth. In the experimental part the discharge products and their concentration under different experimental conditions are shown.
|
|
|
Study of volatile hydrocarbon decomposition in non-thermal plasma of gliding arc at atmospheric pressure
Töröková, Lucie ; Rašková, Zuzana (referee) ; Kozáková, Zdenka (advisor)
Diploma thesis deals with gliding arc discharge in non-equilibrium plasma, its properties and usage for dissociation of volatile organic compounds. Plasma techniques create a perspective alternative to classical methods such as adsorption, biofilters, thermal processes, freezing and condensation. The method used for analysis of dissociation products is described in the theoretical part as well. Method is gas chromatography and it is combined with mass spectroscopy. The experimental part contains the overall description of GlidArc reactor where volatile organic compounds were dissociated. The volatile organic compound is brought into the reactor from the reservoir by carrier gas (nitrogen); synthetic air was used as working gas. The reactor is connected to the device for sampling. This device has several openings for sampling by SPME fibre method, sorption tubes method and a special opening for probe entry from the device Testo 350 M/XL, which enables instant analysis of low-molecular compounds. GC-MS was used for determination of high-molecular products of dissociation. Products sorbed on SPME fibres were analysed directly, compounds sorbed by active carbon were extracted by carbon disulphide. Samples obtained using SPME fibres were analysed. The major products of the dissociaton were found due to this analysis, those major products are in the case of hexane: pentanal, 4 methyl-3-pentanal, 2-butoxy-ethanol, pentane a 2-hexene. Major products detected when dissociating cyclohexane were: l,3-dimethyl-butane, propanal, cyklohexanone, 5-hexenal a 2-pentyn-1-ol. Major products of xylene dissociation were methyl-benzene, benzaldehyde, 4-methyl-benzaldehyde, 1-nitroethyl-benzene a benzenmethanol. After analysis obtained using sorption tubes showed that mainly the dissociated compound was sorbed, but the products of the dissociation were presented in too low concentration for an adequate analysis. For that reason the sorption tubes were used only for quantitative determination of the compounds depending on the power supply. The dependence of the dissociation of the compounds on the power supply was observed using SPME fibres which were used for quantitative determination. The Results obtained by both obtained techniques were almost in accordance. Speaking of low-molecular compounds, dissociation of all compounds gave the same products, i.e. carbon dioxide, hydrogen, nitrogen oxide, nitrogen dioxide and water. The results show that the dissociation of VOC gives - besides many potentially dangerous dissociation products - significant amounts of nitrogen oxides which is harmful to the environment. Hence it is necessary to be concerned with problems studied in the future mainly with respect to limitation of NOx generation. It will be possible to optimalize the conditions of the VOC dissociation on the basis of future kinetic analysis.
|
|
|
Use of automated robotic system for surface treatment of materials
PROLL, Jan
In this thesis I deal with the project of a robotic apparatus that could be used for material treatment by using the gliding arc discharge as well as the appropriate design and choice of materials for the atmospheric pressure discharge jet with regards to a possibility of an industrial use. The input and output parameters were studied, such as the air flow regulation with regards to cooling, the design and choice of materials. Then I observed the temperatures near electrodes depending on the air flow. The applicability of the created atmospheric discharge was taken into account.
|
guest ::
