|
|
Gel polymer electrolytes with nanoparticles
Szotkowski, Radek ; Sedlaříková, Marie (referee) ; Jahn, Michal (advisor)
This master‘s thesis concerns gel polymer electrolytes formed on a methyl methacrylate base with selected types of nanoparticles. In the thesis are also analyzed the methods for measuring electrochemical properties. The practical portion deals with sample preparations of gel polymer electrolytes with different contents of alkaline salt in a solvent, creating gels with different nanoparticle content and comparing gel polymer electrolytes polymerized with heat and UV radiation. The thesis deals with the evaluation of these samples from the viewpoint of electrical conductivity and potential windows as well as thermal analysis of selected samples.
|
|
|
Gel polymer electrolytes modified by ionic liquids with aprotic solvents
Pospíšilová, Michaela ; Sedlaříková, Marie (referee) ; Jahn, Michal (advisor)
This graduate thesis is focused on measuring the electrical conductivity of the gel polymeric electrolytes, their preparation and deals with the changes of the performance ratio of the individual substances in gel electrolyte The theoretical part deals with electrochemistry, gel electrolytes, the conductivity of electrolytes, gel electrolytes preparation, methods used to evaluate the measured results and on the properties of the ionic liquids. In the practical part is summarized the process of preparing gel electrolytes, the chemicals to prepare the gels with ionic liquids. The results are evaluated by using impedance technique and linear voltammetry, there are calculated the values of the electrical conductivity of the electrolyte and potential windows.
|
|
|
Design of the new type of thermal atomic source for oxygen atoms
Šikula, Marek ; Bábor, Petr (referee) ; Mach, Jindřich (advisor)
Ultrathin oxid layers (especially high-k layers) are studied and fabricated by using atomic oxygen sources. These high-k ultrathin layers are integrated into CMOS transistors and DRAM capacitors. In this thesis theory of atomic oxygen beams and ways of theirs creation is summarized. On the basis of the obtained knowledge the engineering design of a unique type of the thermal atomic oxygen source is created. The design was tested by simple experiments. The 3D model and complete engineering drawings are included.
|
|
|
New polymer gel electrolytes
Cafourek, Martin ; Vondrák, Jiří (referee) ; Sedlaříková, Marie (advisor)
This work deals with preparation of gel polymer electrolytes with content of alcaline saults and with conductivity measurements. Materials used for polymer electrolyte preparation and methods of preparation are analysed with respect to usable properties. Experimental part is focused on preparation of methacrylate gel electrolytes, on basis of methacrylate and 3-(Trimehtoxysilyl)propyl methacrylate. Electric conductivity measured by means of impedance spectroscopy is evaluated and compared and possibilites for further research are proposed.
|
|
|
Gel Polymer Electrolytes for Electrochemical Power Sources
Jahn, Michal ; Bartušek, Karel (referee) ; Paidar,, Martin (referee) ; Sedlaříková, Marie (advisor)
Dissertation thesis is focused on study of gel polymer electrolytes for electrochemical power sources, but also for other application. The electrical, electrochemical, mechanical and optical properties of gel electrolyte samples were measured in this work. The main goal was to prepare samples with high specific conductivity and with largest possible potential windows. Thermal stability of some samples was also monitored using thermogravimetric analyzes. The optimization of the chemical composition, quantities and ratios of individual chemicals has been made. Comparison of thermal polymerization and UV polymerization was performed. In the first part of the work, aprotic solvents and their mixtures in combination with lithium and sodium salts and one ammonium salt were investigated. Another subject of research was various crosslinking agents with methacrylate-based monomers. The second part of the work investigated the effect of ionic liquids, phosphor base flame retardants and nanoparticles as additives to gel electrolytes. In the last part of the work, the influence of the magnetic and electric field on the polymerization of gel electrolytes containing nanoparticles and selected copolymers was studied. Finally, a Li-ion cell with a graphite anode, LiFePO4 cathode and selected gel electrolyte was assembled.
|
|
|
Gel polymer electrolytes modified by ionic liquids with aprotic solvents
Pospíšilová, Michaela ; Sedlaříková, Marie (referee) ; Jahn, Michal (advisor)
This graduate thesis is focused on measuring the electrical conductivity of the gel polymeric electrolytes, their preparation and deals with the changes of the performance ratio of the individual substances in gel electrolyte The theoretical part deals with electrochemistry, gel electrolytes, the conductivity of electrolytes, gel electrolytes preparation, methods used to evaluate the measured results and on the properties of the ionic liquids. In the practical part is summarized the process of preparing gel electrolytes, the chemicals to prepare the gels with ionic liquids. The results are evaluated by using impedance technique and linear voltammetry, there are calculated the values of the electrical conductivity of the electrolyte and potential windows.
|
|
|
Gel polymer electrolytes with nanoparticles
Szotkowski, Radek ; Sedlaříková, Marie (referee) ; Jahn, Michal (advisor)
This master‘s thesis concerns gel polymer electrolytes formed on a methyl methacrylate base with selected types of nanoparticles. In the thesis are also analyzed the methods for measuring electrochemical properties. The practical portion deals with sample preparations of gel polymer electrolytes with different contents of alkaline salt in a solvent, creating gels with different nanoparticle content and comparing gel polymer electrolytes polymerized with heat and UV radiation. The thesis deals with the evaluation of these samples from the viewpoint of electrical conductivity and potential windows as well as thermal analysis of selected samples.
|
|
|
New polymer gel electrolytes
Cafourek, Martin ; Vondrák, Jiří (referee) ; Sedlaříková, Marie (advisor)
This work deals with preparation of gel polymer electrolytes with content of alcaline saults and with conductivity measurements. Materials used for polymer electrolyte preparation and methods of preparation are analysed with respect to usable properties. Experimental part is focused on preparation of methacrylate gel electrolytes, on basis of methacrylate and 3-(Trimehtoxysilyl)propyl methacrylate. Electric conductivity measured by means of impedance spectroscopy is evaluated and compared and possibilites for further research are proposed.
|
|
|
Design of the new type of thermal atomic source for oxygen atoms
Šikula, Marek ; Bábor, Petr (referee) ; Mach, Jindřich (advisor)
Ultrathin oxid layers (especially high-k layers) are studied and fabricated by using atomic oxygen sources. These high-k ultrathin layers are integrated into CMOS transistors and DRAM capacitors. In this thesis theory of atomic oxygen beams and ways of theirs creation is summarized. On the basis of the obtained knowledge the engineering design of a unique type of the thermal atomic oxygen source is created. The design was tested by simple experiments. The 3D model and complete engineering drawings are included.
|
guest ::
