|
|
Multifunctional building Litomyšl
Kovář, Lukáš ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
Diploma thesis deals with the design of the multifunctional building located between Havlickova and F. Vogner streets in relation to the existing building in Litomyšl. Building plot is slightly sloping, at the rear goes into greater inclination. The building has four aboveground floors and one underground floor. The building includes services, located in ground floor, administrative premises decomposing in the second and third floor and apartments on the top floor. In the basement are located parking spaces. Supporting skeleton of the building is a cast-in-place concrete frame. Roofs are designed as a flat single shell. In part of roof over third floor is a green roof. The building is founded on piles. Due to the occurrence of water pressure is building an extra solved waterproofing system with checks and activation. The work includes text messages, drawings for building construction, fire safety design, construction and physical assessment of building structures and specialization from concrete structures.
|
|
|
Multifunctional building
Reif, Tomáš ; Pospíšil, Tomáš (referee) ; Pěnčík, Jan (advisor)
The thesis is a project of a multifunctional building in Olomouc. That is the detached house with a rectangular ground plan, one underground floor and four above-ground floors. In the basement there are public parking garages, an technical room and an engine room of the ventilation. On the first floor there is a cafe and a copy center and the separate entrance for owners of the residential units. There are nine separate residential units on the second to the fourth floor. The house is based on the monolithic footings. The vertical supporting structure are formed by the basement walls in a combination with the monolithic reinforced concrete columns. Horizontal supporting structure is designed from the ceiling panels SPIROLL. The building is covered with flat single-roof construction with a drainage inward disposition.
|
|
|
Multifunctional building
Dvořák, Jakub ; Chládek, Ladislav (referee) ; Drobeček, David (advisor)
Dissertation on multifunctional building which is a part of a project which is about a transformation of an industrial district into a residental district with an additional function of shops and services including relaxation zone which is planned on the roof terrace. The dissertation is divided according to the legislation and made in the extent of the documentation of the building.
|
|
|
Tracking Air Pollutants by Using Wireless Sensor Network
Válek, Tomáš ; Šimek, Václav (referee) ; Tříska, Vít (advisor)
This thesis discusses design and production of a prototype of a device and implementation of a firmware for this device. Its function is to wirelessly monitor a concentration of pollutants like carbon monoxide and propane-butane in an atmosphere. Motivation is to allow parking of vehicles with engine gaseous fuels in underground collective garages for public use according to ČSN 73 6058 standard. The prototype of the device has been designed so that it could be used not only in collective garages but also in garages of family houses. The device was successfully designed, produced and programmed so that it can be deployed in real-world conditions.
|
|
|
The Office Building Brno-Husovice
Karlík, Štěpán ; Kalivoda, Tomáš (referee) ; Kalousek, Lubor (advisor)
This diploma thesis deals with a new built office building in Brno-Husovice. The building is situated in a gap site on the street Dukelská třída. The building has four aboveground floors and underground garages. The ground floor is divided into relaxation area and a commercial section with five shopping units. The second and the third floor are designed as a variable office space. The engine room for ventilation is situated on the fourth floor. Construction system is cast-in-place concrete frame. The building is roofed with the green roofs. Foundations are made of large diameter drilled piles.
|
|
|
Multifunctional building
Růžička, Antonín ; Třeštíková, Jana (referee) ; Berková, Petra (advisor)
Diploma thesis Multifunctional building is compiled in the form of project documentation. The building is located in Brno, Vinařská street. It´s a building with four overground floors designed primarily to housing and one underground floor, which is mainly used as collective garage. The building will be made from POROTHERM blocks with the mineral heat insulation. The ceilings will be made of reinforced concrete. The building has a single-layer flat roof.
|
|
|
Multifunkcional building in Frýdek-Místek
Suchý, Petr ; Dvořáková, Jana (referee) ; Čupr, Karel (advisor)
The subject of this thesis is the preparation of project documentation multifunctional building. It is a five-storey building with a basement. The roof structure is designed as a single-layer, flat roof. The building is divided into three working parts. Prví part is used for housing. It consists of 18 housing units, one of which is designed for wheelchair use. The second part of the building is intended for the public. This area retail sales. Includes store books, toys shop, newsagent and a hairdressing salon. The last part of it is public garage. It is intended for users of residential units.
|
|
|
Apartment Building
Hrůza, Jan ; Hovořák, Dalibor (referee) ; Hlavačka, Tomáš (advisor)
The apartment building is located in Brno, Vojtova street. It´s a building with four overground floors and one underground floor, which is mainly used as collective garage. As a structural system is used reinforced concrete skeleton. The building has a single-layer flat roof.
|
|
|
Multifunctional Building in Čáslav
Merenus, Vojtěch ; Matoušková, Ilona (referee) ; Kalousek, Lubor (advisor)
The purpose of the diploma thesis is to design a multi-functional bulding, which fill an empty space on the corner of two streets near the historical city centre of Čáslav. This building has mainly a residential function. Basement will be used for parking and as a place for technical room. Commercial use is forseen for the first floor. Other floors will be set by 18 flats. The main goal is to solve a disposition for given purpose, to choose a right type of structure and work up chosen part of project documentation for building permission. Blueprints will be made in a proper CAD program.
|
|
|
Residential building
Soška, Tomáš ; Jelínek, Petr (referee) ; Vajkay, František (advisor)
Diploma thesis "Residential building" is handleded in the form project documentation. It is a five-story building, the basement. The building is divided into two sections. The supporting structure of the building is monolithic frame with masonry infill. The building is located in a slightly sloping terrain. The entire building is covered by a flat roof. Individual residential units are located in the second, third, fourth and fifth floors. On the first floor there are two multiple garages, storage rooms, utility room and entrance tickets. Parts thesis are specialist in TZB and concrete structures.
|
guest ::
