|
|
Manufacturing of metal yoke of electrical socket by compound tool
Svozilová, Lucie ; Řiháček, Jan (referee) ; Peterková, Eva (advisor)
The project elaborated design of technology production of the metal yoke of electrical socket made of steel DX51D + Z200 by compound progressive tool. Stock material for series of 200 000 pieces is a strip of coil. Manufacturing is realised in five steps consist of cutting, bending and flanging. For flanging was constructed a special mechanism for whose is necessary to use hydraulic counterholder, which is sold as a special peripheral equipment of manufacturing machine. The machine choice was adapted to this criterium. The servopress DSF-N1-800A was chosen as a manufacturing machine, which is made by AIDA company. The press can produce force of 800 kN and make work of 4000 J. Selling price of a one yoke is 24,5 Kč when the profit is one hundred percent. The break-even point comes with 58 140 made piece.
|
|
|
Flanging Technology of Sheet Metals
Sobotková, Kateřina ; Podaný, Kamil (referee) ; Peterková, Eva (advisor)
The issue of bending technology, flanging technology, hole-flanging, machines and tools for constitutive bending and special flanging machines and equipment based on the literary studies and internet research is being introduced in this work. The illustrated documentation is attached to this work.
|
|
|
Proposal of production technology of uni-axial rod
Zejda, Václav ; Peterková, Eva (referee) ; Řiháček, Jan (advisor)
The thesis is focused on the proposal of production of a stamped part of the uni-axial rod located in the axle of the truck. The uni-axial rod is made of materiál S420MC with thicknes of 4 mm and the planned series production is 84 000 pieces per year for 7 years. The most difficult point for production is a collar, which create support of the bushing. It is not posibble to produce a required height with conventional one-stage process, which was experimentally verified. In the programm PAM-STAMP there was designed multiple-stage process of the production with the use of numerical simulation. The progressive die was designed for this process of the production. Maximal load of a forming press is 5 057 kN. Production will be located on the forming press Kaiser 8000-50-F5-RKM by ANDRITZ Metals. Maximum force of the forming press is 8 000 kN.
|
|
|
Manufacturing of metal yoke of electrical socket by compound tool
Svozilová, Lucie ; Řiháček, Jan (referee) ; Peterková, Eva (advisor)
The project elaborated design of technology production of the metal yoke of electrical socket made of steel DX51D + Z200 by compound progressive tool. Stock material for series of 200 000 pieces is a strip of coil. Manufacturing is realised in five steps consist of cutting, bending and flanging. For flanging was constructed a special mechanism for whose is necessary to use hydraulic counterholder, which is sold as a special peripheral equipment of manufacturing machine. The machine choice was adapted to this criterium. The servopress DSF-N1-800A was chosen as a manufacturing machine, which is made by AIDA company. The press can produce force of 800 kN and make work of 4000 J. Selling price of a one yoke is 24,5 Kč when the profit is one hundred percent. The break-even point comes with 58 140 made piece.
|
|
|
Proposal of production technology of uni-axial rod
Zejda, Václav ; Peterková, Eva (referee) ; Řiháček, Jan (advisor)
The thesis is focused on the proposal of production of a stamped part of the uni-axial rod located in the axle of the truck. The uni-axial rod is made of materiál S420MC with thicknes of 4 mm and the planned series production is 84 000 pieces per year for 7 years. The most difficult point for production is a collar, which create support of the bushing. It is not posibble to produce a required height with conventional one-stage process, which was experimentally verified. In the programm PAM-STAMP there was designed multiple-stage process of the production with the use of numerical simulation. The progressive die was designed for this process of the production. Maximal load of a forming press is 5 057 kN. Production will be located on the forming press Kaiser 8000-50-F5-RKM by ANDRITZ Metals. Maximum force of the forming press is 8 000 kN.
|
|
|
Flanging Technology of Sheet Metals
Sobotková, Kateřina ; Podaný, Kamil (referee) ; Peterková, Eva (advisor)
The issue of bending technology, flanging technology, hole-flanging, machines and tools for constitutive bending and special flanging machines and equipment based on the literary studies and internet research is being introduced in this work. The illustrated documentation is attached to this work.
|
guest ::
