|
|
Analysis of Heating Systems for Family House
Holubka, Oleksandr ; Elbl, Patrik (referee) ; Lisý, Martin (advisor)
The aim of this bachelor’s thesis is the assessment of options and innovations when it comes to heating of family houses. These options are then compared. In the last part of this thesis, the gathered insight is used for a technical and economical evaluation and subsequent proposal of a heating system of the model house.
|
|
|
Detached house with a workshop
Hrubeš, Tomáš ; Majsniar, Michal (referee) ; Kolář, Radim (advisor)
The subject of the bachelor's thesis is the preparation of project documentation for the construction of a detached house. The object is located in the town of Drahobuz in a flat terrain, and it is conceived for families of four members. The family house is designed as a stand-alone, one-floor, partly made cellar, with a attic. There is also a workshop of PC servis in the house. The main entrance is at the level of the 1st floor located to northl. The main rooms are oriented to the south. Vertical structures are made of ceramic blocks. The ceiling construction is made of bricks with miako inserts and ceramic concrete joists. The detached house is topped by a gabled roof. The project was prepared using the computer program ArchiCAD. When processing, the emphasis was put on the correct layout, architectural solutions, static requirements and safe use of the building.
|
|
| |
|
|
Grate Boiler for Biomass Combustion
Szabó, Gergely ; Svoboda, Petr (referee) ; Svoboda, Petr (referee) ; Lisý, Martin (advisor)
The thesis deals with the design of a grate steam boiler which has natural circulation and is determined for combustion of wood chips. The boiler has a capacity of 45 t/h and produces superheated steam with the output parameters of 3,5 MPa and 450 °C at the 125 °C feed water temperature. Stoichiometric calculations and the flue gases enthalpy calculations are based on the composition of the specified fuel. The efficiency and fuel consumption of the boiler is also determined. The thesis mainly focuses on the thermal calculation and geometric design of the individual heat transfer surfaces of the boiler. The drawing documentation of the steam boiler is available in the attachment of the thesis.
|
|
|
Manufacturing of fireplace insert exchanger
Běhounek, Martin ; Staněk, Vojtěch (referee) ; Podaný, Kamil (advisor)
This master’s thesis deals with a proposal of production technology of a fireplace insert. Based on various solutions of production and documented calculations, charring has been elected as the most optimal technology. According to the requirements of thermal resistance and weldability the component will be made of boiler metal plate 11 416. Based on checking and technological calculations process of charring on press BAYKAL APHS 3110x180 has been proposed with the nominal power of 180 tons. The verification of bends was realized using computer simulations. Bending tools are made of steel 12 050. A technical-economic evaluation is also part of this master’s thesis.
|
|
|
Water exchanger for fireplace
Kněžínek, Petr ; Baláš, Marek (referee) ; Lisý, Martin (advisor)
The diploma thesis is focused on problems connecting of fireplace with water heating systems. The thesis comprises concise description of fireplace and water heating systems. Particular the thesis is concerned with design proposal of heat water exchanger for fireplace. Last part is devoted to experimental measurement of operating parameters and summarize of getting results.
|
|
|
Hot-water Fireplace
Kárl, Jiří ; Baláš, Marek (referee) ; Lisý, Martin (advisor)
Diploma thesis has three main parts. The first one deals with division of fireplace inserts, their description, way of connection, regulation and protection againts overheating. The second part is about calculations and engineering desing of the prototype hot-water fireplace „Kárlovka“. The last part of diploma thesis verifies the parameters of the desingned fireplace insert by experimental test in two different measurement setup, where there are compared to results obtained with the results of calculation.
|
|
|
Analysis of ash from fireplace
Drápela, Jakub ; Špiláček, Michal (referee) ; Hrnčířová, Michaela (advisor)
This bachelor thesis should familiarize readers with the size of analysis of ashes of fireplace inset. The work is posssible to divide into two parts, when the first one is devoted to a description of fireplace insets, fuels and subsequent processes during burning in fireplace insets and to individual methods used for size analysis of particles.The other part is focused on practical measurements of individual samples of ashes and subsequent evaluation.
|
|
|
Heating the child school
Pyszczyková, Anna ; Wierzbická, Helena (referee) ; Vališ, Ivan (advisor)
Introduction of the theoretical part of the thesis deals with the heat from the past to the present. There is a description of each resource usage, advantages and disadvantages.Calculation section provides an illustrative example the heating system, brand new building of the child school.
|
|
|
Fireplace
Kalousek, Lukáš ; Škvařil, Jan (referee) ; Fiedler, Jan (advisor)
The main topic of the Bachelor Thesis is a fireplace-insert for heating. The first part contains the introduction to the basics of combustion and the types of fire-produced inserts. The second part of the work deals with adjustments of hot-water exchanger and with secondary air intake. In the last part the calculations of the fireplace insert output are provided. The mentioned fireplace insert is Bety from the production company Profitall s.r.o.
|
guest ::
