|
|
Influence of fluxes on weld metal properties
Holub, Kamil ; Sigmund, Marian (referee) ; Kubíček, Jaroslav (advisor)
This thesis deals with the topic of submerged arc welding – an electric arc method of fusion welding, that uses a layer of granulated flux to shield the weld pool from atmospheric gases. Theoretical part is devoted to the description of the welding method and fluxes currently used. The practical part contains an experiment, which consists of making two weld deposits on structural steel S235JR by using different fluxes. First weld deposit is made with OK 10.62 Flux. The same flux alloyed with the Tribaloy T-800 laser cladding powder is used for the second weld deposit. Test specimens are examined on the basis of influence of fluxes combined with a single electrode wire.
|
|
|
Wire Electrical Discharge Machining
Brázda, Radim ; Slaný, Martin (referee) ; Sámelová, Vendula (advisor)
This work deals with the technology of wire electrical discharge machining. The first chapter describes the basic principles and essence of electrical discharge machining. Then the work deals with the wire cutting in terms of wires, machines and cutting conditions and benefits of this technology. In the last chapter the work is focused on trends and news in wire electrical discharge machining and also describes the possibilities of this technology.
|
|
|
Camera system with wire EDM
Gvizd, Michal ; Mouralová, Kateřina (referee) ; Osička, Karel (advisor)
The thesis discusses an unconventional technology of wire-cut electro discharge machining. In the beginning there is a description of the basic principle, the fundamentals of electro discharge machining and its technological application. Further chapters characterise the wire-cut electro discharge machining, the wire electrodes used, the main parts of the machine, the cutting conditions and the advantages of this technology. The practical part is focused on the possibilities of the camera system during the production on a wire cutting machine and the comparison of nowaday´s machines in the manufacture of precise cutting tools in the middle-sized tool-room.
|
|
| |
|
|
Wire Electrical Discharge Machining
Barabáš, Martin ; Osička, Karel (referee) ; Sámelová, Vendula (advisor)
The work deals with the technology of electrical discharge wire cutting. The first chapter describes the principle of EDM machining with the basic description of the methods using this machining technology. The main part is concentrated on describing electric discharge wire cutting principle, used wire electrodes, the main parts of the machine, cutting conditions and benefits of this technology. The last chapter describes current trends in wire cutting, news from producers of wire cutters and possibilities of this technology.
|
|
|
Wire electrical discharge machining at production of precise shears tools
Kuchařík, Milan ; Prokop, Jaroslav (referee) ; Osička, Karel (advisor)
Work is focused on theoretic analisis of manufacturing precise shears tools by unconventional technology closely focused on wire electro discharge machining consideration operation costs of this metod.It is discribing development of this method, machines and tools for electrical discharge machining. It is mention facts influencing quality of cut surface during manufacturing of cutting tools, strategy of cutting workpiece, stage and quality of surface layer after WEDM as long with economic viewpoint and benefits of WEDM technology.
|
|
|
Analysis and use of wire cutting technology
Patočka, Josef ; Osička, Karel (referee) ; Kalivoda, Milan (advisor)
The diploma thesis focuses on the topic of electroerosive machining with greater emphasis on wire cutting technique. The first part clearly describes the principle of electroerosive discharge and its subsequent effects that cause material removal in the given working conditions. This includes the individual methods of electroerosion and the individual accessories that aid the process. The second part is a theoretical analysis of the cutting process using a wire electrode. It describes the machining method, machining strategy and a complete overview of the accessories that accompany the cutting process. The third part of the thesis includes a practical demonstration of the production of a typical representative for wire cutting and then there is evaluation from an economic point of view. Furthermore, there is clear analysis of the surface quality and the final evaluation of the condition of the component.
|
|
|
Influence of fluxes on weld metal properties
Holub, Kamil ; Sigmund, Marian (referee) ; Kubíček, Jaroslav (advisor)
This thesis deals with the topic of submerged arc welding – an electric arc method of fusion welding, that uses a layer of granulated flux to shield the weld pool from atmospheric gases. Theoretical part is devoted to the description of the welding method and fluxes currently used. The practical part contains an experiment, which consists of making two weld deposits on structural steel S235JR by using different fluxes. First weld deposit is made with OK 10.62 Flux. The same flux alloyed with the Tribaloy T-800 laser cladding powder is used for the second weld deposit. Test specimens are examined on the basis of influence of fluxes combined with a single electrode wire.
|
|
|
Camera system with wire EDM
Gvizd, Michal ; Mouralová, Kateřina (referee) ; Osička, Karel (advisor)
The thesis discusses an unconventional technology of wire-cut electro discharge machining. In the beginning there is a description of the basic principle, the fundamentals of electro discharge machining and its technological application. Further chapters characterise the wire-cut electro discharge machining, the wire electrodes used, the main parts of the machine, the cutting conditions and the advantages of this technology. The practical part is focused on the possibilities of the camera system during the production on a wire cutting machine and the comparison of nowaday´s machines in the manufacture of precise cutting tools in the middle-sized tool-room.
|
|
| |
guest ::
