|
|
Web application for antenna analysis
Večeřa, Štěpán ; Kadlec, Petr (referee) ; Raida, Zbyněk (advisor)
Měla být vyvinuta webová aplikace pro zjednodušenou analýzu anténních polí. sestávající z drátových dipólů nebo náplasťových prvků. Původně se předpokládalo, že výpočetní jádro bude vyvinuto v prostředí MATLAB a webové rozhraní v jazyce Python. Studie proveditelnosti ukázala, že plné v jazyce Python je výhodné. Vyvinuté funkce Pythonu pro analýzu a syntézu antén jsou stručně popsány a jejich funkčnost je ověřena v prostředí MATLAB.
|
|
|
Vertically polarized Yagi antenna with magnetic dipole
Weigel, Filip ; Pokorný, Michal (referee) ; Raida, Zbyněk (advisor)
This bachelor’s thesis deals with the principles of operation and simulation of planar Yagi antennas with a magnetic dipole. Simulation of electromagnetic field was performed in the simulator CST MICROWAVE STUDIO (CST MWS). The project compares results of simulations of several types of Yagi antennas. These antennas can be used for the communication along the living tissue (on-body communication).
|
|
|
Measurement of HV equipments by electronic bridge.
Kumičák, Ivan ; Pelikán, Luděk (referee) ; Krbal, Michal (advisor)
The main idea of this thesis is measurements of dielectric materials by using a device Tettex. The thesis is about basic physic properties of dielectric materials. The determination of a dielectric material is considered. The behavior of these materials in electrical fields and reasons, those can have an influence on it, are considered as well. In the text are described measuring methods of chosen parameters of dielectric materials by device Tettex and its functional principles. There are an evaluation of measurements, which were done, and a discussion about achieved results.
|
|
|
Axisymmetric antennas with metamaterials
Roman, Pavel ; Fiala, Pavel (referee) ; Raida, Zbyněk (advisor)
This project is focused on computer modeling of so-called meta-materials, and on the exploitation of metamaterials in the design of electrically small antennas. For modeling, COMSOL Multiphysics 3.3 was used. Simulations were focused on impedance matching of antennas. Antennas with metamaterials were compared with corresponding conventional antennas without metamaterial layers. The project does not investigate the creation of metamaterials; the project concentrates on their influence on crucial parameters of antennas. Next step this project is focused on optimalization this structure in program Matlab version R2009b. We used optimalization method PSO (swarms of particles) and results are comparing whit results calculating in COMSOL program.
|
|
|
Modeling of planar antenna loaded with ring resonators
Šrajbr, Michal ; Kovács, Peter (referee) ; Láčík, Jaroslav (advisor)
This bachelor’s thesis is focused on the design of the dual-band printed dipol loaded with split ring resonators. The principal of this antenna is described in the first part. The main focus is on the design and tuning of the split ring resonators on the required working frequency in the CST Microwave Studio program. These results are used for designing dual-band printed dipol loaded with split ring resonators working at resonance frequencies of 1,8 a 2,4 GHz. The simulation of this antenna was performed in the IE3D program Zeland. The designed dual-frequency printed dipole has been manufactured and measured.
|
|
|
RF Unit for Portable Monitoring Station
Rokos, Lukáš ; Urbanec, Tomáš (referee) ; Záplata, Filip (advisor)
The thesis describes methods for spectrum monitoring, which are used by the Czech telecommunication office. The thesis describes a design of an RF unit for a portable monitoring station and its potential use. The RF unit consists of several devices, which are connected. Devices like an antenna, a rotator, a rotator control unit, coaxial switches, an amplifier and attenuator were chosen as commercially available devices. It is also described, why were these devices chosen. Other devices such as filters, a control unit for the RF unit and a power supply were designed. The RF unit is controlled by a computer. A software for spectrum monitoring contains a graphical user interface for the RF unit control.
|
|
|
Web application for antenna analysis
Večeřa, Štěpán ; Kadlec, Petr (referee) ; Raida, Zbyněk (advisor)
Měla být vyvinuta webová aplikace pro zjednodušenou analýzu anténních polí. sestávající z drátových dipólů nebo náplasťových prvků. Původně se předpokládalo, že výpočetní jádro bude vyvinuto v prostředí MATLAB a webové rozhraní v jazyce Python. Studie proveditelnosti ukázala, že plné v jazyce Python je výhodné. Vyvinuté funkce Pythonu pro analýzu a syntézu antén jsou stručně popsány a jejich funkčnost je ověřena v prostředí MATLAB.
|
|
|
Measurement of HV equipments by electronic bridge.
Kumičák, Ivan ; Pelikán, Luděk (referee) ; Krbal, Michal (advisor)
The main idea of this thesis is measurements of dielectric materials by using a device Tettex. The thesis is about basic physic properties of dielectric materials. The determination of a dielectric material is considered. The behavior of these materials in electrical fields and reasons, those can have an influence on it, are considered as well. In the text are described measuring methods of chosen parameters of dielectric materials by device Tettex and its functional principles. There are an evaluation of measurements, which were done, and a discussion about achieved results.
|
|
|
RF Unit for Portable Monitoring Station
Rokos, Lukáš ; Urbanec, Tomáš (referee) ; Záplata, Filip (advisor)
The thesis describes methods for spectrum monitoring, which are used by the Czech telecommunication office. The thesis describes a design of an RF unit for a portable monitoring station and its potential use. The RF unit consists of several devices, which are connected. Devices like an antenna, a rotator, a rotator control unit, coaxial switches, an amplifier and attenuator were chosen as commercially available devices. It is also described, why were these devices chosen. Other devices such as filters, a control unit for the RF unit and a power supply were designed. The RF unit is controlled by a computer. A software for spectrum monitoring contains a graphical user interface for the RF unit control.
|
|
|
Vertically polarized Yagi antenna with magnetic dipole
Weigel, Filip ; Pokorný, Michal (referee) ; Raida, Zbyněk (advisor)
This bachelor’s thesis deals with the principles of operation and simulation of planar Yagi antennas with a magnetic dipole. Simulation of electromagnetic field was performed in the simulator CST MICROWAVE STUDIO (CST MWS). The project compares results of simulations of several types of Yagi antennas. These antennas can be used for the communication along the living tissue (on-body communication).
|
guest ::
