|
|
The manufacturing of electromotor covering
Stejskal, Luboš ; Špaček, Jindřich (referee) ; Podaný, Kamil (advisor)
This project has been presented for the bachalor branch of study, B2307, it shows the proposal of technological and production process for deep drawn parts. They are produced from the steel (11305). Due to the production volume of 100.000 pieces per year, it was proposed to implement the production process. It basis of the literature study which describes the potential pitfalls of deep drawn technology. After control a technological calculations it was decide to choose the stamping machine CTC 250 (manufactured by ŽĎAS, a.s.).The deep drawn tool has been designed in order to use the maximum capabilities of this stamping machine, specially the upper ejector and the lower holding device.
|
|
|
The manufacturing of oil filter cover
Foltýn, Michal ; Císařová, Michaela (referee) ; Podaný, Kamil (advisor)
The diploma thesis was elaborated in the frame of engineering studies branch M-STG. This project is submitting design of technology production of oil filter cover from the deep drawing sheet iron 11 305.21. The size of production lot is 300 000 pcs/year. In relation to the shape of drawn part and the size of production was chosen the deep drawing technology and designed manufacturing process. For production was on the basis of realized engineering calculations chosen hydraulic deep drawing press and constructed drawing die. The drawing die is on the basis of a transfer conception and includes two blank holders and two ejectors.
|
|
|
The manufacturing of oil filter cover
Foltýn, Michal ; Císařová, Michaela (referee) ; Podaný, Kamil (advisor)
The diploma thesis was elaborated in the frame of engineering studies branch M-STG. This project is submitting design of technology production of oil filter cover from the deep drawing sheet iron 11 305.21. The size of production lot is 300 000 pcs/year. In relation to the shape of drawn part and the size of production was chosen the deep drawing technology and designed manufacturing process. For production was on the basis of realized engineering calculations chosen hydraulic deep drawing press and constructed drawing die. The drawing die is on the basis of a transfer conception and includes two blank holders and two ejectors.
|
|
|
The manufacturing of electromotor covering
Stejskal, Luboš ; Špaček, Jindřich (referee) ; Podaný, Kamil (advisor)
This project has been presented for the bachalor branch of study, B2307, it shows the proposal of technological and production process for deep drawn parts. They are produced from the steel (11305). Due to the production volume of 100.000 pieces per year, it was proposed to implement the production process. It basis of the literature study which describes the potential pitfalls of deep drawn technology. After control a technological calculations it was decide to choose the stamping machine CTC 250 (manufactured by ŽĎAS, a.s.).The deep drawn tool has been designed in order to use the maximum capabilities of this stamping machine, specially the upper ejector and the lower holding device.
|
guest ::
