National Repository of Grey Literature 12 records found  1 - 10next  jump to record: Search took 0.00 seconds. 
Design of a chopper-stabilized multipath operational amplifier
Mrázek, Petr ; Kledrowetz, Vilém (referee) ; Prokop, Roman (advisor)
The main content of this work is the theoretical and practical design of the chosen topology of the chopper-stabilized operational amplifier. The introductory part of the diploma thesis focuses on the theory of noise, offset and drift. In other parts of the work, the origin of these phenomena and the possibility of their elimination are investigated. Furthermore, individual topologies are also analyzed in the work, from which one is chosen, which is then analyzed theoretically. Another part of this work is focused on the block design of the chopper-stabilized operational amplifier, from which the design of the entire system is subsequently created. The last part of the theory is focused on simulating the behavior of the designed chopper-stabilized operational amplifier and comparing it with the theoretical design.
Simple converter for three-phase asynchronous motor 100 W
Pilch, Tomáš ; Kadlec, Josef (referee) ; Červinka, Dalibor (advisor)
The aim of this Bachelor thesis is to propose a optimalization of an already implemented three-phase frequency converter to the higher electric output, using a different chopper circuit. Teoreticaly is possible to drive an asynchronous motor with power up to 2 kW.
DC/AC inverter for small asynchronous machine
Pavlík, Ondřej ; Patočka, Miroslav (referee) ; Červinka, Dalibor (advisor)
The aim of this Bachelor thesis is to propose three-phase converter of low power 100W for driving the asynchronous motor. The device is suitable for construction with fans. This proposal was optimized in light of close price and of technical practicability. The arrangement is possible to use in less exacting applications where it was guarded high price of common converters so far. For allocation catalogue scheme were chosen acceptable components and designed the board of printed circuits.
Frequency inverter for small induction machine
Pavlík, Ondřej ; Procházka, Petr (referee) ; Červinka, Dalibor (advisor)
The aim of this diploma thesis is to continue in prototype realization and a final proposition of three-phase frequency transformer pilot projected in scope of my bachelor work. This transformer is outlined for a small unsynchronized engine to 100 watt output and is designed to supply the fan motor. This suggestion was optimalized from the standpoint of bargain low price and technical feasibility. Powerful part of transformer is solved with help of circuit FSB50450 which is fed from compact source MYRRA 47155. Steering system is guaranteed with circuit MC3PHAC. This device is possible to use in less demanding applications where it was resisted by high expensive price of common frequency transformers.
Auxiliary power sources in electric traction
Kuzdas, Jan ; Procházka, Petr (referee) ; Červinka, Dalibor (advisor)
The purpose of this thesis is proposal of auxiliary power sources in electric traction. Specifically we deal with two converters. Both of them were used in traction vehicle's applications, which are developed by the Department of Power Electrical and Electronic Engineering, Brno University of Technology. First converter was used as a power supply in secondary traction mechanism of electric locomotive. Second one to power supply of dash board in automobile with fuel cells.
Microcontroller control of step motor
Bělíček, David ; Hanák, Pavel (referee) ; Káňa, Ladislav (advisor)
Subject of this thesis is introduction to questions of stepping motors control. The thesis characterizes basic principles some types of stepping motor, their features and control methods. These knowledges are consequently used for proposition of controlling circuit for driving stepping motor using microcontroller.
Simple converter for three-phase asynchronous motor 100 W
Pilch, Tomáš ; Kadlec, Josef (referee) ; Červinka, Dalibor (advisor)
The aim of this Bachelor thesis is to propose a optimalization of an already implemented three-phase frequency converter to the higher electric output, using a different chopper circuit. Teoreticaly is possible to drive an asynchronous motor with power up to 2 kW.
DC/AC inverter for small asynchronous machine
Pavlík, Ondřej ; Patočka, Miroslav (referee) ; Červinka, Dalibor (advisor)
The aim of this Bachelor thesis is to propose three-phase converter of low power 100W for driving the asynchronous motor. The device is suitable for construction with fans. This proposal was optimized in light of close price and of technical practicability. The arrangement is possible to use in less exacting applications where it was guarded high price of common converters so far. For allocation catalogue scheme were chosen acceptable components and designed the board of printed circuits.
Frequency inverter for small induction machine
Pavlík, Ondřej ; Procházka, Petr (referee) ; Červinka, Dalibor (advisor)
The aim of this diploma thesis is to continue in prototype realization and a final proposition of three-phase frequency transformer pilot projected in scope of my bachelor work. This transformer is outlined for a small unsynchronized engine to 100 watt output and is designed to supply the fan motor. This suggestion was optimalized from the standpoint of bargain low price and technical feasibility. Powerful part of transformer is solved with help of circuit FSB50450 which is fed from compact source MYRRA 47155. Steering system is guaranteed with circuit MC3PHAC. This device is possible to use in less demanding applications where it was resisted by high expensive price of common frequency transformers.
Microcontroller control of step motor
Bělíček, David ; Hanák, Pavel (referee) ; Káňa, Ladislav (advisor)
Subject of this thesis is introduction to questions of stepping motors control. The thesis characterizes basic principles some types of stepping motor, their features and control methods. These knowledges are consequently used for proposition of controlling circuit for driving stepping motor using microcontroller.

National Repository of Grey Literature : 12 records found   1 - 10next  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.