|
Forming of solid pollutants from biomass
Havlínová, Denisa ; Štelcl, Otakar (referee) ; Baláš, Marek (advisor)
This bachelor‘s thesis is divided into two main parts. The first part is research and deals mainly with biomass and pollutants. In this section, we will find a two-dimensional distribution of biomass, a comparison of fuel forms and a discussion of basic pollutants with a focus on solid pollutants. The second part is experimental. It starts with a fuel laboratory, where the water, ash and heat content of the biofuels examined is determined. The following is an investigation of the dependence of the PM formation on the properties of the biomass, which was measured by the measurement of these PM by the filters in the collecting device, while the examined biofuels were gradually burned on the fireplace insert.
|
|
Small hydraulic press for bio-briquet
Kadlec, Martin ; Mazůrek, Ivan (referee) ; Prokeš, František (advisor)
The aim of this master´s thesis was the design of a small hydraulic press for bio-briquettes according to predetermined parameters. The theoretical part presents the current situation in terms of biomass processing, briquette production and a description of briquetting presses. The practical part deals with solutions and detailed structural design of the selected alternatives. Models and drawings were created in the SolidWorks 2011.
|
|
Automatic boiler for biomass pellets
Sklenář, Vít ; Štelcl, Otakar (referee) ; Pospíšil, Jiří (advisor)
The aim of this diploma thesis is the research of automatic boilers for biomass pellets and their burners, design of automatic boiler for biomass pellets which include calculation part and drawing part and technical-economics assessment for building in the end. Thesis is divided into four main parts. The first part deals with general information about pellets, automatic boilers for pellets, burners and the standard for boiler. In the second part the pellet boiler is calculated. In the third part the automatic pellet boiler is designed. The fourth section compares three possible variants. Comparison is done for economics and the user.
|
|
Biomass boilers
Bednář, František ; Štelcl, Otakar (referee) ; Baláš, Marek (advisor)
This bachelor’s thesis deals with biomass boilers for heating family house. The thesis is divided into several parts. In the first part are characterized solid fuels, the individual kinds of solid fuels, properties, modifications and processing are described to finishing suitable form for burning. The second part describes individual biomass boilers for house heating. The last part of this thesis compares the selected biomass boilers from an economic perspective.
|
|
Forming of solid pollutants from biomass
Havlínová, Denisa ; Štelcl, Otakar (referee) ; Baláš, Marek (advisor)
This bachelor‘s thesis is divided into two main parts. The first part is research and deals mainly with biomass and pollutants. In this section, we will find a two-dimensional distribution of biomass, a comparison of fuel forms and a discussion of basic pollutants with a focus on solid pollutants. The second part is experimental. It starts with a fuel laboratory, where the water, ash and heat content of the biofuels examined is determined. The following is an investigation of the dependence of the PM formation on the properties of the biomass, which was measured by the measurement of these PM by the filters in the collecting device, while the examined biofuels were gradually burned on the fireplace insert.
|
|
Automatic boiler for biomass pellets
Sklenář, Vít ; Štelcl, Otakar (referee) ; Pospíšil, Jiří (advisor)
The aim of this diploma thesis is the research of automatic boilers for biomass pellets and their burners, design of automatic boiler for biomass pellets which include calculation part and drawing part and technical-economics assessment for building in the end. Thesis is divided into four main parts. The first part deals with general information about pellets, automatic boilers for pellets, burners and the standard for boiler. In the second part the pellet boiler is calculated. In the third part the automatic pellet boiler is designed. The fourth section compares three possible variants. Comparison is done for economics and the user.
|
|
Small hydraulic press for bio-briquet
Kadlec, Martin ; Mazůrek, Ivan (referee) ; Prokeš, František (advisor)
The aim of this master´s thesis was the design of a small hydraulic press for bio-briquettes according to predetermined parameters. The theoretical part presents the current situation in terms of biomass processing, briquette production and a description of briquetting presses. The practical part deals with solutions and detailed structural design of the selected alternatives. Models and drawings were created in the SolidWorks 2011.
|
|
Biomass boilers
Bednář, František ; Štelcl, Otakar (referee) ; Baláš, Marek (advisor)
This bachelor’s thesis deals with biomass boilers for heating family house. The thesis is divided into several parts. In the first part are characterized solid fuels, the individual kinds of solid fuels, properties, modifications and processing are described to finishing suitable form for burning. The second part describes individual biomass boilers for house heating. The last part of this thesis compares the selected biomass boilers from an economic perspective.
|