|
|
Effect of synovial fluid composition and surface topography modification on lubrication of joint replacements
Hekrle, Pavel ; Vampola, Tomáš (referee) ; Vrbka, Martin (advisor)
The main objective of this diploma thesis is to determine the influence of synovial fluid compodition and the influence of surface microtextures on lubrication of hip join replacements. For all experiments, hip joint simulator based on the pendulum principle was utilized. Metal heads (CoCrMo) manufactured by B Braun company and and tailor made acetabular cups from optical glass were used as contact couples. Acetabulum dimensions were fabricated according to dimensions of real implants. Experiments with surface microtextures simulated walking cycle for 210 s and development of lubrication film over time was observed.Results have shown that all types of tested structures improved lubrication of contact area, where the best results were obtained for square and triangle shapes respectively. Second set of experiments was based on the fact, that the composition of synovial fluid of healthy people differs from the composition of patients with various stages of osteoarthritis. Therefore, experiments with different model fluids were compared, which in their composition correspond to different groups of patients. For the model fluid that corresponds to the largest number of cases, experiments with individual components and combinations thereof were subsequently performed to provide a more detailed description of how these components affect the film-forming mechanism. The results show, that a change in fluid composition of patients with osteoarthritis can have a major negative effect on fluid formation process within the pair.
|
|
|
Analysis of biotribological properties of artificial hip joint
Laštůvka, Jan ; Burša, Jiří (referee) ; Návrat, Tomáš (advisor)
The development of total hip arthroplasty has reached a state when quality prostheses are made, whose longevity is influenced significantly by material properties, design, component fixation and rate of wear of the articulating surfaces. It is the wear rate which is the most important factor influencing successful results for the use of total hip prostheses. The aim of this thesis is to perform a research on the various combinations of hip prostheses and its loading conditions. Also an experimental measurements of Bovine serum lubricating film thickness between the artificial femoral head and a glass disc are performed for different contact kinematic conditions.
|
|
|
Design of parts of tribometer with reciprocating motion
Dražka, Ondřej ; Vrbka, Martin (referee) ; Čípek, Pavel (advisor)
The bachelor thesis deals with design of parts of tribometer with reciprocating motion. Several conceptual solutions are made on base of existing studies from which the best solution for given application is selected. The tribometer will be used for experimental measuring on real cartilage which should lead to better understanding of friction and lubrication processes in synovial joint. The outcome of this thesis are component parts along with the manufacturing drawings.
|
|
|
Design of a bath on the device for testing human joints
Svoboda, Tomáš ; Vrbka, Martin (referee) ; Čípek, Pavel (advisor)
The bachelor thesis deals with the design of the bathtub of an experimental device for testing human joints. Tribometer is used for experimental measurement of friction and visualization of real cartilage film in flooded synovial fluid. The result of this work is the design of air releasing, heating and sealing the bathtub in which the synovial fluid is located. By removing air bubbles and heating the liquid to the temperature of the human body, more accurate shear coefficient values and improved contact visualization are achieved. This should lead to a better understanding of the friction and lubrication processes in the synovial joint. The result of this work is chosen optimal design variant and production drawing documentation.
|
|
|
Effect of toothpaste abrasiveness on friction and wear of dental fillings
Formánková, Pavla ; Čípek, Pavel (referee) ; Vrbka, Martin (advisor)
This bachelor thesis dealt with research, that links dental hygiene issues with tribology. The aim of the thesis was to analyze the effect of abrasive particles of toothpastes on friction and wear of dental fillings. The friction coefficient was evaluated in a tooth brushing simulation on an UMT TriboLab tribometer that lasted 260 minutes. The tribological system consisted of a toothbrush, a sample of composite material and a solution of artificial saliva with a selected toothpaste. Each paste was defined by an RDA value from 0 to 250, expressing the degree of abrasiveness therefore the ability of the toothpastes to wear the material. Wear was analysed on a Bruker Contour GT-X optical profilometer. From the measured values it was found that the influence of abrasive particles is significant in terms of wear of dental fillings. For both the friction coefficient and the material loss when measured only in the presence of artificial saliva, the resulting values were generally lower. However, the material loss in the toothpastes measurments did not increase linearly with the RDA value as expected. Literature studies and measurements have shown that this may be due to other factors affecting wear. Future research on these factors could lead to the selection of more gentle toothpastes in dentistry and thus prevent the increase in wear of dental fillings
|
|
|
The Effect of Synovial Fluid Constituents on Friction and Lubrication of Articular Cartilage
Čípek, Pavel ; Dr. Prashant K. Sharma (referee) ; Muňoz, Anna Neus Igual (referee) ; Vrbka, Martin (advisor)
Práce se zabývá problematikou biotribologie modelu synoviálního kloubu. Cílem práce je popsat vliv složek synoviální kapaliny na formování mazacího filmu v modelu synoviálního kloubu. Práce je zaměřena na experimentální analýzu součinitele smykového tření a jeho propojení s pozorováním adsorbovaného mazacího filmu v kontaktu pomocí fluorescenční mikroskopie. Součástí práce je návrh tribometru, který umožňuje vizualizaci v průběhu experimentů. Tribometr je vyroben, kalibrován a verifikován pomocí komerčního tribometru. Dále je součástí práce návrh metodiky experimentů včetně návrhu postupu pro zpracování a hodnocení výsledků. Pro zpracování záznamu z vizualizace kontaktu byl navržen speciální software, který pracuje na principu segmentace obrazu. Poslední část práce je zaměřena na aplikaci vyvinuté metodologie spolu s nově navrženým tribometrem, což umožňuje posoudit roli složek modelové kapaliny u formování mazacího filmu v modelu synoviálního kloubu. Experimentální část je založena na měření tření za současné vizualizace kontaktu. Tato práce prezentuje originální výsledky rozšiřující oblast biotribologie synoviálního kloubu, které mohou pomoci dalšímu rozvoji účinné léčby pacientů s nemocnými klouby.
|
|
|
Friction and lubrication of articular cartilage
Hilšer, Pavel ; Daniel, Matej (referee) ; Vrbka, Martin (advisor)
The main goal of this diploma thesis is to determine the role of hyaluron acid and phospholipids on friction and lubrication of articular cartilage in regard to optimization of viscosupplements. This is carried out by measuring the coefficient of friction of the articular cartilage with several lubricants. Cartilage is lubricated particularly by a conventional viscosuplement, optimized viscosuplementation with phospholipids and model synovial fluid. In order to observe the function of those viscosuplements in the human body, both are mixed with the model synovial fluid, ubiquitous in human joints, in given ratio. Experiments revealed high friction when it comes to convectional viscosupplementation as opposed to low friction of the optimized viscosuplement with phospholipids. The same situation occurs when cartilage is lubricated with those viscosuplements mixed with model synovial fluid which might lead to development of a new, better, viscosupplementation based on hyaluron acid and phospholipids.
|
|
|
Effect of femoral head size on friction and lubrication in THR
Bartošík, Jan ; Dzimko, Marián (referee) ; Vrbka, Martin (advisor)
This diploma thesis concerns itself with the experimental study of friction and lubrication in the artificial hip joint depending on the head size. Measurements were made in a hip joint simulator based on the principle of pendulum. For the friction measurements artificial joints, made from three material combinations and two diameters, from two companies were used. The measurements show that the material combination has a more significant effect to friction coefficient than the head size. Using a bigger head size shows a decrease in friction coefficient for all material combinations when compared to a smaller head size. For the measurement of lubrication film the colorimetric interferometry was applied. A metal-on-glass contact pair was used, where the glass cups were made according to the real measurements of the joint cups. Four types of hip replacements with diameters of 28 and 36 mm with two different diametral clearance were measured during a constant motion of 210 seconds. Measurements show, that the lubrication film in the hip joint with a small diametral clearance increases very fast over the 800 nm value. Contact surfaces in the hip joint with a large diametral clearance aren’t separated by the lubrication film, resulting in a damage of the chromium coating in cup. A thick lubrication film results in a higher friction coefficient, when compared with hip joints with a very thin or no lubrication film.
|
|
|
Design of Simulator for Friction Analysis in a Knee Joint
Dobrovolná, Lucie ; Studený, Zbyněk (referee) ; Sedlák, Josef (advisor)
This bachelor thesis deals with the construction of a device simulating the kinematics of the knee joint. Boundary conditions are inspired by the ISO 14243-3 standard and are based on the selection of suitable components. The simulator will be able to record the course of the coefficient of friction between the cartilage forming the translational motion, the CoCr head forming the rotational motion and the pressing force, thus helping to better understand the biotribological processes between the selected surfaces. The design must be developed with respect to the relative movement of components, sample material and lubrication. The introductory part of the text deals with an overview of current knowledge, which serves as the main input to the creation of the structure. Based on the research part, several conceptual solutions are created in the field of construction and method of friction measurement. The resulting solution is selected from the proposed concepts, which meets predetermined conditions and contains specific drives and sensors.
|
|
|
The effect of surface condition of artificial joint cup on the friction coefficient
Černohlávek, Mikuláš ; Dočkal, Kryštof (referee) ; Nečas, David (advisor)
This bachelor’s thesis deals with the effect of microtextured surface of an artificial joint cup on a friction coefficient. The primary aim of this thesis was to compare friction coefficients of original and microtextured joint cups. Experimental measurements were made on pendulum hip joint simulator and results were evaluated in Matlab. Four types of femoral heads (CoCrMo, BIOLOX Delta, BIOLOX Forte and oxinium) and three types of lubricants (PBS, model synovial fluid and hyaluronic acid solution) were used during the measurements. The results show, that using PBS and synovial fluid leads to decrease of the coefficient of friction while using modified joint cup. We can assume that microtextured surface of artificial joint cup (separately or in combination with microtextured femoral head) could be a significant benefit for prolonging lifespan of implants.
|
guest ::
