|
|
Detached family house with design studio
Dufek, Tomáš ; Žižka, Lukáš (referee) ; Vajkay, František (advisor)
The project addresses the new family house with design studio. It also dealt a double garage and parking for design studio. The building is designed in steep terrain. The building is designed Porotherm (masonry+ insulation system, ceilings). Roofing, flat roof construction. Thermal transmittance conform to the recommended values according to.
|
|
|
Load bearing RC structure of the multiple dwelling
Janisch, Filip ; Perla, Jan (referee) ; Šimůnek, Petr (advisor)
The project deals with the lower part of the construction of a residential building. The parking spaces are situated in three underground floors. The five floors occur in the over-ground part of the building. The building is based on the secant walls of Milan around the perimeter. Internal walls and columns are supported with micropiles. In this project are designed base plate, external walls and stairs. Static system and the calculation of the internal forces was carried out in Scia Engineer 2012 Student version.
|
|
|
Sewage pumping station
Kustyánová, Orsolya ; Šulák, Pavel (referee) ; Strnad, Jiří (advisor)
This thesis deals with the design and assessment of all supporting parts of a reinforced concrete sewage pumping station in the village Vrbice u Velkých Pavlovic. The main parts of the thesis are the technical report, static analysis, drawing documentations and visualisations. Calculation of internal forces was performed by the software Scia Engineer and verified by manual calculation. The drawing documentation consists of shape and reinforcement drawings of supporting parts.
|
|
|
Influence of subsoil stiffness on base plate deflection
Podolák, Patrik ; Zich, Miloš (referee) ; Strnad, Jiří (advisor)
The work deals with the analysis of the deflection of the base plate, which is located on the not-known subsoil. The survey of the bedrock found unevenness of the base soil and the presence of imported soil, which is mixed with construction waste. Around the perimeter of the board there are foundation belts, and in the center there is only the mentioned foundation plate. The structure is loaded with internal load-bearing walls 200 mm thick. under which there is no foundation belt. The aim of the work is to assess possible variants of the bedrock and thus prevent possible material damage. Static load calculation will be performed manually and the subsequent design model will be performed in Scia Engeneer.
|
|
|
Technical inspection station
Smolík, Jindřich ; Moravcová, Eva (referee) ; Matějka, Libor (advisor)
This thesis deals with a new building technical control station, office space and hotel. The building is situated on three floors, on the first floor we find technical inspection station and office premises manual technical lines. On the second floor there are offices. On the third there is a hotel. The building is designed by a rectangular shape with a flat roof and on the third floor there is a trafficable terrace. The supporting structure consists masonry Porotherm and reinforced concrete system columns, which is found only on the first floor. The supporting structure of tensioned ceiling consists of prestressed beams ceilings Spiroll a concrete slab. External surface finish on the first floor is made up of silicate plaster paste and the remaining two floors are made of ventilated facades. Utility room is located on the first floor, from where a chimney Schiedel is build. Most of the floor space in the building are made of a carpet or tiles, only in the service line is epoxy coating
|
|
|
Design of residential house
Moravcová, Eva ; Loudil, Lukáš (referee) ; Zich, Miloš (advisor)
This is a residential house in Brno. The supporting structure is reinforced concrete. The building has one basement and six floors. Vertical load-bearing structures are made up of reinforced concrete columns and walls. Horizontal load-bearing structures are formed by slabs (bearing in both directions). The staircase is concrete slab. Foundation is on piles. Infill vertical structures are brick. In the fifth floor pool is located.
|
|
| |
|
| |
|
|
Cast-in-place tank of sewage plant
Kustyánová, Orsolya ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
This thesis deals with the design and assessment of all supporting parts of a cast-in-place reinforced concrete tank of sewage plant in the village Vrbice. Tha main parts of the thesis are the technical report, static analysis, drawing documentations, construction process and visualisations. Calculation of internal forces was performed by the software Scia Engineer and verified by manual calculation. The drawing documentation constists of shape and reinforcement drawings of supporting parts.
|
|
|
Cast-in-place underground pumping station
Tejkal, David ; Zich, Miloš (referee) ; Strnad, Jiří (advisor)
The aim of this work was to design a monolithic gas station. Construction was divided to 3 stages: base plate concreting, wall of the tank and slab. All these parts are connected together. Design was centered on all of these parts and problems during concreting and using were solved too. It also includes drawings.
|
guest ::
