|
|
Design and Development of Experimental Device for Testing the TEP Acetabula and Wear Identification using Optical Method
Houfek, Martin ; Kratochvíl, Ctirad (referee) ; Hortel, Milan (referee) ; Hlaváčková, Milada (referee) ; Florian, Zdeněk (advisor)
Today is the implantation of joint replacements, although a radical, but very functional restoration frequent way ill joint. The implants are placed high demands on their biocompatible and long-term function, which is directly related to wear of joint replacements in the human body. Therefore, analysis of the complex behavior of the implant in the human body is a fundamental problem of biomechanics of implants. This issue is dedicated, this dissertation thesis. Dissertation thesis deals with the solution design and development of experimental device for testing the TEP acetabula and wear identification using optical method. The proposed device allows the joint burden hole TEP physiological manner, but by working with the acetabulum burdened by Power resultant joint axis passes through the hole. The physiological loading of articular wells and evaluating the size of the loss of polyethylene is currently intensively addressed. The results of this study may in the near future, serving as information for assessing the conduct of wear prosthetic hip joint in vivo. The work is devoted to solving the problem of the size required to detect the loss of polyethylene for joint replacement arthroplasty: Design and development of experimental equipment for testing the acetabulum of the hip joint arthroplasty. Identify wear using optical methods. Design and development of experimental equipment was made in the system Inventor Professional 2010 at the level of 3D modeling. Great attention was paid to the design fit into the acetabulum TEP testing machines and gripping the acetabulum into an optical device. Management options were tested with combinations of experimental equipment engines. Suggestions were made and then tests for fixing the acetabulum into an optical device. Has the possibility of depth analysis and identification of wear joined with innovative solutions to evaluate the loss of polyethylene acetabulum arthroplasty. Identification of abrasion (loss of polyethylene) joint arthroplasty holes were carried out experimental measurements using an optical holographic interferometry. The comprehensive analysis of the results of experimental measurement of the loss of polyethylene shows that this method can identify both the size but also an area where there is even to small changes in the surface, which depend on the abrasion. One can also say that using this method we are able to affect the will or displacements that affect the size of the loss of polyethylene in joint arthroplasty hole. Despite the number of known and lessons learned arising from the results of solving the problem of design and development of experimental equipment for testing the acetabulum and hip arthroplasty wear identification using optical methods, this work is that the initial study to identify problematics wear of joint replacements. Complete resolution of this issue is beyond the scope of one doctoral thesis.
|
|
|
Distribution and number of wear debris particles around jouint replacements
Veselý, Filip ; Sosna, Antonín (advisor) ; Zima, Tomáš (referee) ; Koudela, Karel (referee)
Aseptic loosening due to polyethylene wear presents one of the most frequently occurring joint replacement complications requiring a revision surgery. Numerous scientific works and publications deal with the issue of morphology, determination and distribution of wear particles. Few studies, however, determine reliably amounts of particles in individual periprosthetic zones. The objective of this work was to evaluate the correlation between amounts of wear particles and periprosthetic osteolysis findings. Description of distribution of these particles in the surroundings of joint replacement presented further objectives of the work. Wear particles were isolated from granuloma obtained during revisions of total hip replacements. Amounts of wear particles were determined using IRc. These findings were correlated with X-ray examinations and intraoperative findings. Method of progressive enzymatic degradation of tissue was used in order to describe wear particles distribution in polyethylene granuloma and surrounding periprosthetic tissues. Results showed uneven incidence of wear particles in the surroundings of the total joint replacement. The incidence correlated with X-ray examinations and intraoperative findings. Distribution of particles was described as well as new determination methods and further...
|
|
|
Design and Development of Experimental Device for Testing the TEP Acetabula and Wear Identification using Optical Method
Houfek, Martin ; Kratochvíl, Ctirad (referee) ; Hortel, Milan (referee) ; Hlaváčková, Milada (referee) ; Florian, Zdeněk (advisor)
Today is the implantation of joint replacements, although a radical, but very functional restoration frequent way ill joint. The implants are placed high demands on their biocompatible and long-term function, which is directly related to wear of joint replacements in the human body. Therefore, analysis of the complex behavior of the implant in the human body is a fundamental problem of biomechanics of implants. This issue is dedicated, this dissertation thesis. Dissertation thesis deals with the solution design and development of experimental device for testing the TEP acetabula and wear identification using optical method. The proposed device allows the joint burden hole TEP physiological manner, but by working with the acetabulum burdened by Power resultant joint axis passes through the hole. The physiological loading of articular wells and evaluating the size of the loss of polyethylene is currently intensively addressed. The results of this study may in the near future, serving as information for assessing the conduct of wear prosthetic hip joint in vivo. The work is devoted to solving the problem of the size required to detect the loss of polyethylene for joint replacement arthroplasty: Design and development of experimental equipment for testing the acetabulum of the hip joint arthroplasty. Identify wear using optical methods. Design and development of experimental equipment was made in the system Inventor Professional 2010 at the level of 3D modeling. Great attention was paid to the design fit into the acetabulum TEP testing machines and gripping the acetabulum into an optical device. Management options were tested with combinations of experimental equipment engines. Suggestions were made and then tests for fixing the acetabulum into an optical device. Has the possibility of depth analysis and identification of wear joined with innovative solutions to evaluate the loss of polyethylene acetabulum arthroplasty. Identification of abrasion (loss of polyethylene) joint arthroplasty holes were carried out experimental measurements using an optical holographic interferometry. The comprehensive analysis of the results of experimental measurement of the loss of polyethylene shows that this method can identify both the size but also an area where there is even to small changes in the surface, which depend on the abrasion. One can also say that using this method we are able to affect the will or displacements that affect the size of the loss of polyethylene in joint arthroplasty hole. Despite the number of known and lessons learned arising from the results of solving the problem of design and development of experimental equipment for testing the acetabulum and hip arthroplasty wear identification using optical methods, this work is that the initial study to identify problematics wear of joint replacements. Complete resolution of this issue is beyond the scope of one doctoral thesis.
|
guest ::
