|
| |
|
|
Contribution to the construction of cost and energy efficient family houses
Čech, Josef ; Mohelníková, Jitka (referee) ; Gašparik,, Jozef (referee) ; MBA, Pavel Slováček, (referee) ; Hrazdil, Václav (advisor)
Dissertation focuses on the verification of construction family houses made of concrete shell block with internal thermal insulation system. The construction technology is transferred to the Czech Republic from France. The work focuses on building envelope. The suitability of implementation is assessed on the basis of verification selected thermal technical requirements placed on building envelope. Requirements are specified by legislation in force in the ČR. The verification was performed by using software simulations and measurements on realized buildings. Critical areas of construction technology were identified on the basis software simulations and measurements on site. It was suggested solution, in which critical areas comply the thermal technical requirements. The building envelope was checked also using the thermography imaging on site. Continuous measurement of interior temperature was used to evaluate thermal comfort in the room. In the completed buildings was tested airtightness of the building envelope, which revealed other critical areas of the building envelope. Critical areas are necessary to solve with sufficient care. The economic cost of implementing each variants of exterior walls made of concrete shell block with internal thermal insulation were compared with the economic costs of implementing external walls made of burnt clay hollow blocks and made of burnt clay hollow blocks with external thermal insulation system ETICS. Subsequently, the economic return was calculated for individual variants of external walls made of concrete shell blocks with internal thermal insulation. From the environmental viewpoint was made comparison of production greenhouse gas CO2 and SO2 (cause acid rains) during the life cycle of the individual variations of exterior walls made of concrete shell blocks with system of internal thermal insulation, exterior walls made of burnt clay hollow blocks and burnt clay hollow blocks with external thermal insulation syst
|
|
| |
|
|
Air tightness of building structures and critical details
Vávra, Petr ; Tichomirov,, Vladimír (referee) ; Bečkovský, David (advisor)
In thesis is dealt with problematic of how the value of air permeability may be affected by properties for water vapour diffusion with regard to OSB material There were chosen two main brands of OSB at Czech trade market Two specimens of OSB with different thickness were chosen for each brand. As a first the specimens were tested for air tightness to work out a value of air permeability for each specimen. Afterwords, the testing was conducted for gaining properties of water vapour diffusion on each specimen. As a final assessment was analysed the impact of properties of water vapour diffusion on the air tightness for each specimen. The general meaning of gaining higher air tightness with higher water vapour resistance was proved . It was shown that with raising thickness is usually gotten higher value of water vapour diffusion resistance. However it could not mean getting high air tightness. The crucial parameter is the quality of the material for gaining higher resistance against water vapour diffusion as well as for higher airtightness.
|
|
|
Proposal of measures for reducing energy demands of food stores
Julinová, Patricie ; Vlach, František (referee) ; Bečkovský, David (advisor)
The master thesis deals with measures to reduce energy performance of grocery store building. Model of the grocery store is evaluated according to a recommended energy values specified by Czech standards and according to the real values of the actual consumption. These values are compared. Final building analysis for a proposal measures to reduce energy consumption is based on the invoices of the real consumption and on the experimental assignments. Experimental measurements are the Blower door test of the tightness of the building envelope, the measures with the thermovision camera and the measuring of the illumination intensity. The most efficient proposal is extended to the whole model network of the food shops in the Czech Republic.
|
|
|
Zhodnocení efektivity a návrh konstrukčního řešení pasivních domů z hlediska energetické a finanční náročnosti při použití materiálů dostupných na evropském trhu
PAVEL, Michal
The topic of the diploma thesis is an evaluation of the efficiency and a proposal of the construction solution of passive houses in term of energy and financial demands using materials available on the European market. The thesis is divided into two main parts. The first one consists of a literature research, which provides the necessary information not only about the passive standard as such, but also about the principles associated with its construction. The second contains a practical part, where a database of the most important details for each material variant is created, together with their workflows, individual summaries and price comparisons. The result of this work is an evaluation of the efficiency of self-help construction of passive houses.
|
|
|
Proposal of measures for reducing energy demands of food stores
Julinová, Patricie ; Vlach, František (referee) ; Bečkovský, David (advisor)
The master thesis deals with measures to reduce energy performance of grocery store building. Model of the grocery store is evaluated according to a recommended energy values specified by Czech standards and according to the real values of the actual consumption. These values are compared. Final building analysis for a proposal measures to reduce energy consumption is based on the invoices of the real consumption and on the experimental assignments. Experimental measurements are the Blower door test of the tightness of the building envelope, the measures with the thermovision camera and the measuring of the illumination intensity. The most efficient proposal is extended to the whole model network of the food shops in the Czech Republic.
|
|
|
Contribution to the construction of cost and energy efficient family houses
Čech, Josef ; Mohelníková, Jitka (referee) ; Gašparik,, Jozef (referee) ; MBA, Pavel Slováček, (referee) ; Hrazdil, Václav (advisor)
Dissertation focuses on the verification of construction family houses made of concrete shell block with internal thermal insulation system. The construction technology is transferred to the Czech Republic from France. The work focuses on building envelope. The suitability of implementation is assessed on the basis of verification selected thermal technical requirements placed on building envelope. Requirements are specified by legislation in force in the ČR. The verification was performed by using software simulations and measurements on realized buildings. Critical areas of construction technology were identified on the basis software simulations and measurements on site. It was suggested solution, in which critical areas comply the thermal technical requirements. The building envelope was checked also using the thermography imaging on site. Continuous measurement of interior temperature was used to evaluate thermal comfort in the room. In the completed buildings was tested airtightness of the building envelope, which revealed other critical areas of the building envelope. Critical areas are necessary to solve with sufficient care. The economic cost of implementing each variants of exterior walls made of concrete shell block with internal thermal insulation were compared with the economic costs of implementing external walls made of burnt clay hollow blocks and made of burnt clay hollow blocks with external thermal insulation system ETICS. Subsequently, the economic return was calculated for individual variants of external walls made of concrete shell blocks with internal thermal insulation. From the environmental viewpoint was made comparison of production greenhouse gas CO2 and SO2 (cause acid rains) during the life cycle of the individual variations of exterior walls made of concrete shell blocks with system of internal thermal insulation, exterior walls made of burnt clay hollow blocks and burnt clay hollow blocks with external thermal insulation syst
|
|
|
Air tightness of building structures and critical details
Vávra, Petr ; Tichomirov,, Vladimír (referee) ; Bečkovský, David (advisor)
In thesis is dealt with problematic of how the value of air permeability may be affected by properties for water vapour diffusion with regard to OSB material There were chosen two main brands of OSB at Czech trade market Two specimens of OSB with different thickness were chosen for each brand. As a first the specimens were tested for air tightness to work out a value of air permeability for each specimen. Afterwords, the testing was conducted for gaining properties of water vapour diffusion on each specimen. As a final assessment was analysed the impact of properties of water vapour diffusion on the air tightness for each specimen. The general meaning of gaining higher air tightness with higher water vapour resistance was proved . It was shown that with raising thickness is usually gotten higher value of water vapour diffusion resistance. However it could not mean getting high air tightness. The crucial parameter is the quality of the material for gaining higher resistance against water vapour diffusion as well as for higher airtightness.
|
|
| |
guest ::
