|
|
Proposal and Design of the Flat Plate Slab
Ducháč, Josef ; Šimůnek,, Petr (referee) ; Švaříčková, Ivana (advisor)
The Bachelor´s thesis is focused on the analysis, design and assessment of the Flat Plate Slab. The Slab is located in multifunctional complex of winter stadium. All construction is made from reinforced concrete. The thesis solves various ways to create computational models. The thesis includes working-out of static calculation, drawing shape, reinforcement drawing of the Flat Plate Slab and the elaborate comparison with computational models.
|
|
|
Space structure of industry building object
Pelikán, Adam ; Švaříčková,, Ivana (referee) ; Šimůnek, Petr (advisor)
The subject of this project is the structure of the storage hall which is made of reinforced concrete. It is designed as precast frame (span of 18m), founded on pocket footings. The roof deck (non-rigid) consists of ribbed slabs. The cladding is made of sandwich panels (reinforced concrete and isolation) layed on foundation beam. The design is focused on the single typical frame. Roof girder, column and pocket footing are designed. Designed life of the structure is 50 years.
|
|
|
Superstructure of the backpart of the family house
Jetmar, Ondřej ; Šulák,, Pavel (referee) ; Strnad, Jiří (advisor)
The thesis accommodates a design of a slab made out of reinforced concrete. On one side, the slab overhangs the load-bearing mansonry. The thesis comprises two solutions. In the first solution, the overhung part of the slab is not supported while in the second solution is this part locally supported by pillars. The thesis contains two variants of the slab design and also evaluation of the results.
|
|
|
Reinforced concrete skeleton construction
Prokop, Lukáš ; Ing. Ivana Laníková, Ph.D (referee) ; Šulák, Pavel (advisor)
The bachelor work is aimed on designing of reinforced concrete, monolithic, locally supported floor slabs and fire effects on concrete constructions. Ceiling construction is located on the first floor. Calculation of internal forces is carried out in the Scia Engineer software. There is prepared drawing of the shape and drawing of the ceiling construction. In addition there are mentioned examples of evaluating the effects of fire on concrete constructures.
|
|
|
Design of the concrete sewage plant
Štramberský, Martin ; Strnad,, Jiří (referee) ; Zich, Miloš (advisor)
The subject of my bachelor's thesis is a static design of a sewage plant reservoir, dimensioning and examination of the construction part for Capacity Limit State and Applicability Limit State. Design documentation is included in the project. The aim of this thesis was to design the reservoir in such a way that there would be no cracks in the concrete. The calculations were carried out in accordance with Eurocode 2.
|
|
|
Part of load-bearing structure of multipurpose building
Anděl, Martin ; Jeneš, Rostislav (referee) ; Terzijski, Ivailo (advisor)
The aim of this project was to design a part of a load-bearing structure of a multipurpose bulding. The load-bearing structure was designed of transversely oriented monolithic reinforced concrete multi-storey frames. These frames are in each storey connected by a continuous floor slab. Both design and relevant drawing documentation of a continuous floor slab, beam, column and a column footing was made in this project.
|
|
|
Chimney load bearing structure
Hasala, Ivo ; Girgle,, František (referee) ; Šimůnek, Petr (advisor)
My chachelor work solves the static diagram shaft of the contemporary stach, a load, an analyse of inside powers in the programme SCIA ENGINEER and a review combination load M + N. The contemporary steel reinforcements is an appreciating to definite the combination load in six horizontal cuts along the height stach. My calculation includes the produce algorithm in the programme MS EXCEL for the appreciating choice intercircular cats of stach on the combination load M + N.
|
|
|
Reinforced concrete skeleton construction
Pevner, Jan ; Strnad,, Jiří (referee) ; Šulák, Pavel (advisor)
The bachelor project is aimed for design of monolithic reinforced concrete slab supported locally and stairs over the second floor in administrativ object, elaboration of design and reinforcement drawings to bending and shear. Calculation of internal forces is made by computer program SCIA Engineer with manual verification using simplified methods.
|
|
|
Family house with surgery
Výšek, Jan ; Petříček, Tomáš (referee) ; Kacálek, Petr (advisor)
The project is solving object for living. Is it family house with the private physioterapist’s surgery. The object is standing separately and has two floors above ground and one floor under ground. The 2nd floor is solved as attic. For masonry is used material ceramic bricks with the ETICS, the ceiling is made from POT & MIAKO systeme with reinforcing components. In underground floor is used material the lost formwork concrete blocks with the armature and additional insulation. For the roof is used combination of saddle roof and hip roof, with angle 35 degrees. Object is located in peripheral locality of the city Jaroměř. Surrounding terrain is flat.
|
|
|
Guest House in Brno
Budina, Martin ; jeneš, Rostislav (referee) ; Podroužková, Božena (advisor)
The purpose of this thesis is to present the static design of chosen parts of the supporting structure of Guest House in Brno. Part of the building is located below ground level, therefore the supporting structure is made of monolithic reinforced concrete frames holding the reinforced concrete slab. Above ground level the supporting structure is made of masonry construction with folded ceiling. Drawing documentation is included.
|
guest ::
