|
|
Rationalisation of manipulation shop
Vičar, Miroslav ; Neužil, Karel (referee) ; Hlavenka, Bohumil (advisor)
The aim of this thesis is to reach a distinctive rationalization of the production and assembling plant of Cargo Van Brno company. In the project of new lay-out of the production area were all restrictions given by management of the company and by owner of the property strictly met. Technological changes of the process plan and investments suggestions are determined by the company's strategic plan.
|
|
|
Machining of aluminum alloy component
Lačňák, Martin ; Kalivoda, Milan (referee) ; Osička, Karel (advisor)
The thesis focuses on the technology of production of the turbine-type component in Edwards company. It specifically focuses on the part of the turning production, in which in the first part an analysis of the component and the technologicity of its construction is created. Problematic aspects are analysed in terms of material structure and procedure technology. An evaluation of the former and the new supplier is made in terms of rationalization of material structure and their statistical evaluation of rationalization improvement towards keeping to geometrical tolerances. Grooving tools greatly influence the overall machining time during turning. An experiment is made to find out the measured values of the radial forces, the process of chip formation and surface roughness during grooving. The technology of procedure further deals with rationalization of the current machine OKUMA LU25-M and purchase of a new machine Mori Seiki NTX 2000, for which new tool equipment is made in cooperation with Walter company. The final technical-economical evaluation sums up all findings from the research of the given issue. In the discussion, further continuation is suggested for the research in the development and for the continuously controlled component productivity.
|
|
|
Rationalization of production technology body
Dostál, Martin ; Chladil, Josef (referee) ; Osička, Karel (advisor)
In the introductory part of the thesis, there is a description of machining technologies used in the production of body. This is followed by a detailed analyse of the current technology of production of this component with an emphasis on finding its problematic parts, including a proposal of the options of the rationalization. After the methods of rationalization assesment, a new technological process was developed and the alternative tools were proposed. Considerable time and money savings were achieved by this rationalization. In the discussion section, there were designed some options of solving problems arising during the installation of this rationalization into working.
|
|
|
Production logistics
Olej, Tomáš ; Vaněk, Jiří (referee) ; Špinka, Jiří (advisor)
This master’s thesis deals with manufacturing and logistic issues of low voltage cabinets produced by ProCS, s.r.o. company. The aim is to design and evaluate manufacturing and assembling process rationalization proposal. The proposal is based on familiarization with technological process of cabinet's manufacturing. Becoming familiar with manufacturing and assembling process of marshalling and system cabinets made it possible to find an opportunity of rationalization through automation of selected assembling processes. Automation of striping and crimping process is possible through suitable crimping machine. Situation before and after rationalization is economically interpreted and evaluated using break even point analysis. Through mentioned rationalization arrangement it is possible to improve manufacturing flexibility, reduce lead times and cut down manufacturing costs.
|
|
|
Rationalization of Production Processes in the Company
Novakov, Ivan ; Pilka, Jan (referee) ; Juřica, Pavel (advisor)
The diploma thesis focuses on rationalization of manufacturing processes in company Honeywell Safety Products Partizanske s.r.o.. Main target is to track actual state of processes, which are connected to manufacturing activity, search for reasons of collisions and try to minimize or eliminate them. By designing of multiple optimization solutions, evaluating of data and after applying best-fitted solution can be collision eliminated on purpose. These solutions are exposed to economic analyse and possible share with Company. Economic perspective can help to easier identify which of solution could have bigger impact after implementation to support prosperity of mentioned company.
|
|
|
Rationalization of production end piece
Grandič, Jan ; Götz, Bohuslav (referee) ; Osička, Karel (advisor)
This thesis was created in cooperation with company Westfalia. The aim of this work is to analyze the possibility of rationalization of production of end parts for gas tight hoses used in the automotive industry. The thesis includes a study of rationalization of possible production of the second generation of end parts as well as completion of assembly line for the current generation of end parts.
|
|
| |
|
|
Rationalisation of production technology
Konečný, Petr ; Kolář, Ladislav (referee) ; Osička, Karel (advisor)
This thesis deals with the rationalization of production technology of selected component. The first part contains a brief introduction of the company NTS Prometal Machining s.r.o. and brief description of the product. The following section is an analysis of existing manufacturing technology. The practical part is focusing on the proposal of rationalization versions of the production process. After evaluation of all possible options of rationalization there has been developed a new technological process with a respect to time and cost savings. Finally there was carried out economical evaluation and recommendation for further production of this component.
|
|
|
Rationalization of the clamping jaws production process for the chuck
Kovář, Matouš ; Jaroš, Aleš (referee) ; Kalivoda, Milan (advisor)
This bachelor's thesis focuses on the rationalization of the production process of chuck clamping jaws in TOS Svitavy, a.s. The introductory part of this work presents the company and its production program. It also includes the production of manual self-centering universal chucks and clamping jaws. An analysis of the existing technology of production of clamping jaws is performed and critical points of the current production process are determined. There is also a proposition of possible rationalization solutions and then the most suitable version is selected. Than, this version is processed, a new production technology is designed and a new technological procedure for the production of clamping jaws is assembled. Finally, an evaluation of the existing and newly designed technology is performed and the conclusions of this thesis are presented.
|
|
|
Rationalization project of air-filters production
Buďa, Vojtěch ; Heinl, Zdeněk (referee) ; Rumíšek, Pavel (advisor)
This thesis deals with rationalization layout of air and fuel filters production in the company MANN-HUMMEL (CZ) s.r.o., which ensures minimization of work in process and design optimal load of production on the basis measured and analyzed times operations of production. Part of thesis is the design layouts of workplace with selection of optimal variation which provides shortening and better overview on flow of material production.
|
guest ::
