|
|
MV netwok design for 75 new houses in Damborice
Makuta, Peter ; Novák, Vojtěch (referee) ; Ptáček, Michal (advisor)
Content of this thesis is medium voltage network design for seventy five houses in Damborice. At the beginning author discuss about history of transmission network and distribution network. Next topic is about steady state of network. In theoretic part are different solving methods of linear and non-linear simultaneous equations discussed. Author describes four methods – method of node voltages, elimination of balance node, Gauss-Seidel and Newton method. The electric properties of both the overhead transmission lines and cable lines and their variety are part of this work too. There is purpose, forms and parameters of transformers described. Simplicity of author’s design should reduce the usage of many electrical elements visible to residents.
|
|
|
Project of Overhead Line
Chrástek, Radim ; Těžký, Jiří (referee) ; Orságová, Jaroslava (advisor)
Overhead line has to suit a series of requests, so that all its parts safely resist mechanical and electrical tension. This bachelor’s thesis deals with mechanical tension. At first, necessary overhead line’s relationships under different climatic conditions are deduced. Consequently, practical calculations are introduced. Calculations are done with Matlab program.
|
|
|
Proposal of the reconstruction of a distribution network in a specific area
Richter, Miroslav ; Mrvová, Dana (referee) ; Blažek, Vladimír (advisor)
The dissertation describes several types of low and high voltage distribution networks including their implementation in specified location with regards to the reliability and quality of electric power supply. The distributions networks are classified according to ways of cable routing, distribution line voltage levels as well as according to types of network interconnections. The high and low voltage distribution networks are further categorized based on used cable types, where, more attention is paid to insulated lines used in the Czech Republic, low voltage lines called „AES“ and „PAS“ high voltage lines used more and more during the distribution network reconstruction. Attention is also given to the description of used methodology for the calculation of network performance stability. An individual part of the dissertation is devoted to a low voltage distribution network proposal in the village of Kovalovice. Based on performed analysis of distribution network conditions, several reconstruction versions were proposed with the help of „KASI“ software, the description of which is also included. The proposed versions are further analysed for both, technical and economical aspects and is selected most suitable version of the distribution network.
|
|
|
MV Overhead Line Protections and their Coordination with Autoreclosers
Šoustal, Petr ; Skala, Petr (referee) ; Orságová, Jaroslava (advisor)
The aim of this Master’s Thesis is to describe protections for overhead lines in distribution networks. Here are described requirements for the protection and the basic protections. Protections are divided according to their protective function. For each protection is given its use and its power plans. It is stated in the work setting of protection in the real network. On this network is simulated place with short-circuit and described the action of protection. The work also deals with the coordination of protection with automatic circuit breakers. This chapter shows that, given the selectivity is not possible to deploy two or more reclosers (remotely-operated switches) to the core network management. The next chapter describes two representatives reclosers available on the Czech market OSM 27 and GVR 27. Chapter describes and compares their performance characteristics. Conclusion the work includes a proposal protected the lead in incorporating automatic circuit breakers (remotely operated circuit breakers and reclosers). The proposal is based on two different levels of annual number of interruptions and duration of annual general interruption of electricity supply. For these levels the company EGÚ Brno, a.s. proposed several variants of the use of remote-controlled in terms of reducing the cost of the penalty. Our task was to choose a variant that would be applicable in the real network. Reducing costs is feasible only in the limits Ln = 6 failures / year and Lt = 720 min / year, where the selected option No. 4. The limits Ln = 8 failures / year and Lt = 1,080 min / year, not in the real network may no option in terms of selectivity.
|
|
|
Analysis of Using Cable Sections in the Route of 400 kV Overhead Line
Belatka, Martin ; Rusek, Stanislav (referee) ; Modlitba, Petr (referee) ; Matoušek, Antonín (advisor)
The thesis deals with the use of cable sections in the overhead transmission route of the 400 kV transmission system in the Czech Republic, with the design of the arrangement of the cable route and with the solution of the crossover of the cable line with other networks of the technical infrastructure or natural obstacles. The thesis shows what the construction of a 400 kV cable line in the overhead transmission route - which has not been implemented in the Czech Republic as of yet - entails in practice. The first, general part deals with the electrical properties of both the cable lines and the combined overhead transmission lines with intermediate cable sections, and this sets out limitations on the maximum possible length of the cable sections. The following chapters provide an analysis of the magnetic field of the cable line, its impact on the surrounding environment and the possibilities of its shielding. On the basis of this knowledge optimization of the designed cable route arrangement is carried out in order to make the route comply with hygiene limits. The next part uses selected locations on a real route of overhead 400 kV transmission line to show what the construction of cable sections inserted into the route of overhead 400 kV line would involve. The design includes a professional estimate of the time and financial demands of the construction.
|
|
|
Design of the expansion of 22kV distribution network in a specific area
Řehoř, Jiří ; Beneš, Jan (referee) ; Blažek, Vladimír (advisor)
The aim of this work is the reconstruction and development of the distribution network of DS to ensure electricity supply in the required quality to existing customers and new customers connecting to the planned industrial zone Šlapanice. The first part deals with the inclusion of a distribution network in power system, its distribution and composition. Subsequently, the work deals with the description of the management of distribution networks, cable and outdoor leadership and their parameters. It also contains guidelines for the design of high voltage networks. The end of the first part is devoted to calculating the steady operation of the network. In the second part, the proposed project using the PAS DAISY Off-line v 4.00 Bizon. Based on the available evidence is developed steady state operation. We found that lines are overloaded and need to be strengthened with regard to the development of industrial zones and adjusting the network to ensure safe and reliable operation. The conclusion focuses on the economic evaluation of proposed alternatives.
|
|
|
Mechanical Design of 110 kV Overhead Line
Guliš, Tomáš ; Sýkora, Martin (referee) ; Orságová, Jaroslava (advisor)
When designing overhead lines we must respect many influences that act on it. These are electrical effects and mechanical effects, caused in normal conditions by wind, frost and temperature. This bachelor’s thesis is mainly focused on comparison of calculation of separate load cases and comparison of parameters obtained by mechanical calculation of particular overhead line according to standards ČSN 33 3300 and ČSN EN 50341-1.
|
|
|
Steady state calculation of 22kV network
Kaplanová, Klára ; Opat, Jaroslav (referee) ; Topolánek, David (advisor)
Master's thesis proposes a new operation state of distribution network 22kV in Prostějov district after connection of the new Prostějov – Západ substation. The PASS DAISY OFF-LINE Bizon program is used to calculate power losses, optimal network possibilities, as well as to create a new model of Prostějov district's distribution network and to design a modification of a current state of given location. A description of this calculating and simulation program is also included in this paper. The theoretical part describes calculating methods of distribution network’s condition, with emphasis on mathematical method used by PASS DAISY OFF-LINE Bizon program, the modified Newton-Raphson method. The aim of this paper is to prepare technical documentation for E.ON company, with respect to new operation disconnection, planned overhead and cable lines of corresponding parameters. These changes in network's configuration will cause a new distribution of feeding areas. As a result, related changes of provided power from individual feeding points and changes of power currents in electric lines will occur. Due to new operation connection, a reduction of losses and, simultaneously, an improvement of voltage ratios are expected. One of the aims of this paper is to update network's model in PASS DAISY OFF-LINE Bizon program to match the current network’s state of a given area. The outcome of this work is a comparison between the current condition and the new operation condition, with new Prostějov – Západ substation connected, from perspective of distribution network's operator.
|
|
|
Feeding power out of 110/22 kV Moravany u Brna substation
Chromík, Aleš ; Beneš, Jan (referee) ; Blažek, Vladimír (advisor)
The aim of this Master’s thesis is the design and reconstruction of the high voltage distribution network for the company E. ON with focus on calculation of the stabilized operation and on the planning of new cable taps from the transformer substation Moravany u Brna. The first part of the theoretical analysis of the work deals with the inclusion of the distribution network into the power system and with principles of development and construction of high voltage networks. The second part includes a general calculation of stabilized operation of the power distribution network and a familiarization with the program PAS Off - Line Bison 4.0. The practical part of the thesis is focused on the calculation of the stabilized operation at the current state of transformer substation Moravany u Brna using the PAS Off - Line Bizon 4.0 V programme. This part also contains the design of six new cable lines which are needed to strengthen the power distribution in the southern part of the city Brno. The closing part of this chapter constitutes of a outdoor and indoor cable line renovation. These cables are connected to the transformer substation Moravany u Brna and a calculation of stabilized operation is also included in this part.
|
|
|
Analysis and design of the replacement of the specific overhead line in distribution network
Račuch, Marek ; Bátora, Branislav (referee) ; Ptáček, Michal (advisor)
The diploma thesis deals with the issue of the reconstruction of outdoor cables of low voltage distribution network in exchange for the cable line. It analyzes the important factors which are necessary for the preparation of the project documentation for the issue of the territorial consent. The thesis is divided into 4 main chapters. After the first chapter there is introduced chapter 2, which shows the differences between cable and outdoor cables with their advantages and disadvantages. Chapter 3 deals with the guiding principles for low-voltage cable design and the types of equipment needed for the proper operation of a particular distribution network while respecting the requirements of valid PNEs and ČSNs. Chapter 4 explains the chronology of the process leading to the formulation of a basic technical proposal, which is further addressed in Chapter 5, which deals with the complete formulation of the project documentation for the issue of territorial consent.
|
guest ::
