|
|
Losses of capacitor run induction motor
Štaffa, Jiří ; Hájek, Vítězslav (referee) ; Mach, Martin (advisor)
This project deals with increasing efficiency of one phase induction motor with permanent split capacitor. We can whole thesis divide into two parts, the first one is basic and the second is interested in analysis and measurement. First part handles with construction of single phase induction motor, explanation of function principle, start and run of motor. Calculating of efficiency including type of losses, which reduce efficiency. Second part concerns analysis losses including moment load characteristic, motor measurement while rotor is locked, with no load operation, measuring mechanical and additional losses. Further there will be measured useful values for creation model for simulation (reactance of windings etc.). Than will be the model created in ANSYS Maxwell with module RMxprt. After analytic calculation in RMxprt and using Finite Element Method (FEM) load characteristics will be compared together. This comparison gives us information about accuracy of model for simulation. Simulation and measurement will be carried out on another engine with high quality ferromagnetic material used for magnetic circuit of motor. Further will be done simulation of motor with modifications shown in previous chapter for high efficiency.
|
|
|
Increasing the Efficiency of the Process of Machining Injection Molds Components
Hruška, Lukáš ; Osička, Karel (referee) ; Sedlák, Josef (advisor)
The aim of this diploma work was a proposal to make the process of machining of injection mould more efficient. The work described the initial state of machining of a moulding injection part from the technological point of splinter machining, including the description of each production areas, the tool used in the process and the machines. The main part of the diploma work was focused on consideration of a possible way leading to the increase in the efficiency of the production process of machining of an injection mould part that included the transfer of the initial way of machining of a moulding injection part to CNC lathe Gildemeister CTX beta 500. Furthermore the work described the tool that had been used including the description of proposed control programs for machining of an injection mould part. The essential part of the work was a techno-economical assessment of the proposed variant of solution, which included analysis of the production costs and the time indexes that were achieved during the production.
|
|
|
Design of increase in efficiency of machining of connecting rod
Holub, Milan ; Kalivoda, Milan (referee) ; Sedlák, Josef (advisor)
This diploma thesis deals with a machining process of the forging of connecting rod in the company SANBORN a.s mainly for reason to propose a more effective method of machining. The first part is focused on the analyse of actual process of production which is realized on several manufacturing machines. On second part are proposed the increases in efficiency of single machining operation and is used the modern multi - fuction machining centre OKUMA MULTUS which will increase the productivity and quality of machined part. In final part is applied for evaluation of machining and secondary production times and is performed the total financial analyse.
|
|
|
Efficiency Improvement Proposal of Production of Engineering Component
Hapala, Václav ; Jandačka, Marek (referee) ; Sedlák, Josef (advisor)
The master's thesis deals with the proposal of more effective production of a part. The theoretical part describes the technology of milling and drilling and the practical part focuses on the analysis of the current part production technology and the consumption of the machining time as assessment of the current machining process efficiency. The next part contains characteristics of the innovative technology, used tools and fixtures. In the conclusion both variants of production, the comparison of consumed machine time and production costs are evaluated.
|
|
|
Efficiency incerasing of axial compressors of jet engines
Fojtl, Michal ; Weis, Martin (referee) ; Šplíchal, Miroslav (advisor)
Bachelor thesis deals with axial compressors of jet engines and with increasing their efficiency. First part describes basic principles of compressors, losses, stall and surge and compressor characteristics. Second part deals with possible solutions for increase of their efficiency and pressure rise. These solutions are summarized and possible combination is recommended.
|
|
|
Design of machining technology for production of the camera base
Trčka, Vojtěch ; Polzer, Aleš (referee) ; Sedlák, Josef (advisor)
This thesis deals with streamlining of the process of machining parts Basis of camera in cooperation with PEVOT Products Ltd. The first part focuses on the analysis of existing machining technology in terms of technology, as well as an analysis of time consumed for assessing the effectiveness of the current machining process. The second part of the thesis focuses on the design of innovative technology machining of components and design postprocessor for manufacturing equipment VMC ZPS 560. In conclusion, both variants of production are evaluated. They developed the analyses of time consumed for the production of components and production costs.
|
|
|
Efficiency Improvement Proposal of Production of Engineering Component
Nonn, Vilém ; Sliwková, Petra (referee) ; Sedlák, Josef (advisor)
This thesis deals with the efficiency improvement proposal of production of engineering component for agricultural machine. Firstly, the current production proces is described including description of the component and determination of manufacture times. The next part contains efficiency improvement proposal of production including determination of manufacture times. The last chapter contains a comparison of both variants in terms of production costs. The final provision summarizes results which were achieved and overall benefits of the thesis.
|
|
|
Efficiency Improvement Proposal of Production of Engineering Component
Nonn, Vilém ; Sliwková, Petra (referee) ; Sedlák, Josef (advisor)
This thesis deals with the efficiency improvement proposal of production of engineering component for agricultural machine. Firstly, the current production proces is described including description of the component and determination of manufacture times. The next part contains efficiency improvement proposal of production including determination of manufacture times. The last chapter contains a comparison of both variants in terms of production costs. The final provision summarizes results which were achieved and overall benefits of the thesis.
|
|
|
Efficiency Improvement Proposal of Production of Engineering Component
Hapala, Václav ; Jandačka, Marek (referee) ; Sedlák, Josef (advisor)
The master's thesis deals with the proposal of more effective production of a part. The theoretical part describes the technology of milling and drilling and the practical part focuses on the analysis of the current part production technology and the consumption of the machining time as assessment of the current machining process efficiency. The next part contains characteristics of the innovative technology, used tools and fixtures. In the conclusion both variants of production, the comparison of consumed machine time and production costs are evaluated.
|
|
|
Increasing the Efficiency of the Process of Machining Injection Molds Components
Hruška, Lukáš ; Osička, Karel (referee) ; Sedlák, Josef (advisor)
The aim of this diploma work was a proposal to make the process of machining of injection mould more efficient. The work described the initial state of machining of a moulding injection part from the technological point of splinter machining, including the description of each production areas, the tool used in the process and the machines. The main part of the diploma work was focused on consideration of a possible way leading to the increase in the efficiency of the production process of machining of an injection mould part that included the transfer of the initial way of machining of a moulding injection part to CNC lathe Gildemeister CTX beta 500. Furthermore the work described the tool that had been used including the description of proposed control programs for machining of an injection mould part. The essential part of the work was a techno-economical assessment of the proposed variant of solution, which included analysis of the production costs and the time indexes that were achieved during the production.
|
guest ::
