|
|
Fluid boiler CFB for wood biomass combustion, setam paramters 150 t/h; 9,3 MPa; 530 °C
Martinek, Jan ; Moskalík, Jiří (referee) ; Baláš, Marek (advisor)
This diploma thesis deals with the control calculation of fluid biomass boilers with circulating fluidized bed. The introduction briefly introduced fluidized bed boilers and explained what biomass is. Furthermore there is a stoichiometric calculation of combustion. The calculation of the losses and the efficiency of the boiler is following. Desulphurization is calculated briefly. The main part is devoted to the design and calculation of individual heat exchanging surfaces: superheater P1, superheaters 2 and 3, the wall superheater, the return chamber, hanging tubes, economizer and air heater. At the end is calculated total tolerance boiler. Work is completed with a diagram of temperature of working media and combustion.
|
|
|
Incineration of Sludge Mixed with Alkali
Urban, Václav ; Jecha, David (referee) ; Houdková, Lucie (advisor)
Subject of the present Ing. thesis is problem of incineration of sewage sludge and influence of lime on production of editions. In work are described kinds of sewage sludge combustion and possibilities of edition cleaning. Work includes design and description of experimental combustion of sewage sludge mixtured with kalcite in fluidized bed reactor. The end of work delal with, evaluation of editions from combustion experiment. Evaluated components of bunt gases are: heavy metals, TZL, SO2, CO, CO2, HCl, HF, O2, NO, PAH, PCB, PCDD/F.
|
|
|
Fuid bed boiler for biomass
Bytešník, Jan ; Skála, Zdeněk (advisor)
This master thesis designes the calculation of fluid boiler with specific part - the circular fluid bed. The heat is given by combustion of wood biomass. The thesis is devided into several parts. All necessary elementary results are going to be reached within these parts: an analysis of solid fuel, stechiometry calculation, discussion on output limits and the environmental point of view, definition of elemental heat losses and general heat efficiency, calculation and design of a combustion part and its heat loads and calculation of enthalpies with different ash concentrations. All these phases get to a successful design of the fluid boiler heat balance and sizes of heat-flow surfaces. The composition of the boiler shows the added drawing.
|
|
|
Desulphurisation of flue gas fuidized bed boiler.
Miklík, Tomáš ; Slezák, Pavel (referee) ; Skála, Zdeněk (advisor)
The aim of this thesis is to design a desulphurization device for the fluid boiler. In the fluid boiler, fuel with extremely high sulphur content is burnt and the combustion products are not desulphurized to the required level, therefore it is necessary to build a desulphurization device. The thesis consists of two parts – theoretical and practical. In the theoretical part I stated the emission limits of sulphur dioxide, elaborated possible desulphurization methods and described the sorbets suitable for desulphurization. In the practical part I chose a dry desulphurization method with fluid reactor, to which a dry sorbent on the basis of lime hydrate is dosed. For the required parameters, I designed the whole desulphurization equipment including cloth filters, all necessary silos and major components. It is a design proposal with a layout and a spatial model.
|
|
|
Reducing emissions of SO2 in the flue gas from the fluidized bed boiler
Tesař, Jan ; Jecha, David (referee) ; Brummer, Vladimír (advisor)
Aim of this thesis is to design a technology of a flue gas desulphurization of fluidized bed boiler. Currently, the state of technology is not able to provide flue gas desulphurisation to required level. For this reason it is necessary to build additional device for the desulphurisation. Theoretical part of the thesis deals with the emission limits of sulphur dioxide, available methods of desulphurization and sorbents suitable for the desulfurization. In practical part conditioned dry sorption method is chosen for the specified source, technological and structural design for suggested desulphurization technology including design of all device is proposed. The thesis also includes a technology design and a 3D model.
|
|
|
Reducing emissions of SO2 in the flue gas from the fluidized bed boiler
Tesař, Jan ; Jecha, David (referee) ; Brummer, Vladimír (advisor)
Aim of this thesis is to design a technology of a flue gas desulphurization of fluidized bed boiler. Currently, the state of technology is not able to provide flue gas desulphurisation to required level. For this reason it is necessary to build additional device for the desulphurisation. Theoretical part of the thesis deals with the emission limits of sulphur dioxide, available methods of desulphurization and sorbents suitable for the desulfurization. In practical part conditioned dry sorption method is chosen for the specified source, technological and structural design for suggested desulphurization technology including design of all device is proposed. The thesis also includes a technology design and a 3D model.
|
|
|
Fluid boiler CFB for wood biomass combustion, setam paramters 150 t/h; 9,3 MPa; 530 °C
Martinek, Jan ; Moskalík, Jiří (referee) ; Baláš, Marek (advisor)
This diploma thesis deals with the control calculation of fluid biomass boilers with circulating fluidized bed. The introduction briefly introduced fluidized bed boilers and explained what biomass is. Furthermore there is a stoichiometric calculation of combustion. The calculation of the losses and the efficiency of the boiler is following. Desulphurization is calculated briefly. The main part is devoted to the design and calculation of individual heat exchanging surfaces: superheater P1, superheaters 2 and 3, the wall superheater, the return chamber, hanging tubes, economizer and air heater. At the end is calculated total tolerance boiler. Work is completed with a diagram of temperature of working media and combustion.
|
|
|
Incineration of Sludge Mixed with Alkali
Urban, Václav ; Jecha, David (referee) ; Houdková, Lucie (advisor)
Subject of the present Ing. thesis is problem of incineration of sewage sludge and influence of lime on production of editions. In work are described kinds of sewage sludge combustion and possibilities of edition cleaning. Work includes design and description of experimental combustion of sewage sludge mixtured with kalcite in fluidized bed reactor. The end of work delal with, evaluation of editions from combustion experiment. Evaluated components of bunt gases are: heavy metals, TZL, SO2, CO, CO2, HCl, HF, O2, NO, PAH, PCB, PCDD/F.
|
|
|
Fuid bed boiler for biomass
Bytešník, Jan ; Skála, Zdeněk (advisor)
This master thesis designes the calculation of fluid boiler with specific part - the circular fluid bed. The heat is given by combustion of wood biomass. The thesis is devided into several parts. All necessary elementary results are going to be reached within these parts: an analysis of solid fuel, stechiometry calculation, discussion on output limits and the environmental point of view, definition of elemental heat losses and general heat efficiency, calculation and design of a combustion part and its heat loads and calculation of enthalpies with different ash concentrations. All these phases get to a successful design of the fluid boiler heat balance and sizes of heat-flow surfaces. The composition of the boiler shows the added drawing.
|
|
|
Desulphurisation of flue gas fuidized bed boiler.
Miklík, Tomáš ; Slezák, Pavel (referee) ; Skála, Zdeněk (advisor)
The aim of this thesis is to design a desulphurization device for the fluid boiler. In the fluid boiler, fuel with extremely high sulphur content is burnt and the combustion products are not desulphurized to the required level, therefore it is necessary to build a desulphurization device. The thesis consists of two parts – theoretical and practical. In the theoretical part I stated the emission limits of sulphur dioxide, elaborated possible desulphurization methods and described the sorbets suitable for desulphurization. In the practical part I chose a dry desulphurization method with fluid reactor, to which a dry sorbent on the basis of lime hydrate is dosed. For the required parameters, I designed the whole desulphurization equipment including cloth filters, all necessary silos and major components. It is a design proposal with a layout and a spatial model.
|
guest ::
