|
|
Apartment Building - Design of Selected Reinforced Concrete Elements
Jakoubek, Lukáš ; Horák, David (referee) ; Švaříčková, Ivana (advisor)
The bachelor thesis is focused on the continuous static solutions of monolithic reinforced concrete ceiling construction and the three-flight staircase in the five-storied apartment house. The entire structure is designed from concrete. To determine the effects of internal forces used computational design of Scia Engineer 2013.1. Assessment of the elements is performed by the first limit state. Work includes developing a static calculation, design reinforcement drawings, shapes and reinforcement drawings solved elements.
|
|
|
Structure of apartment building – selected elements
Kanichová, Barbora ; Švaříčková, Ivana (referee) ; Perla, Jan (advisor)
The aim of the bachelor thesis is selected construction elements of low-rise apartment building. Reinforced concrete slab of the upper floor is solved in this thesis. The requirement to limit the propagation of impact noise from the staircase to the building and thermal bridge interruption was taken into account in the design of the construction. The deformation of the ceiling structure was verified regarding the integrity of the deposited infill structures. RFEM 5.18 software is used to solve internal forces. All the calculation are performer according to ČSN EN 1992-1-1 and ČSN 73 1201.
|
|
|
Housing for Seniors
Pilík, Václav ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The diploma thesis is elaboration of project documentation of the object Housing for seniors in Brno - Dolní Heršpice. The site is located un the area with the planned development of the city. The object is detached, three-story with a partial basement. The building is divided into five parts. The building is based on concrete foundation pads and strips. The structural construction is a combined column and wall system in technological design as monolithic concrete. The building is designed as a low energy building, with contact insulation (ETICS). The whole building is designed with forced air exchange. An extensive and intensive walkable flat roof is designed. The aim is to create small, barrier-free, community housing with affordable services and support, with a possible life expectancy. Services for the elderly with reduced self-sufficiency and with mild health and mental dysfunctions are considered. The building is equipped with space for accommodation with a capacity of 48 beds, space for eating with a separate kitchen, space for leisure and physical activities, space for basic health and social care and space for administrative and technical facilities. The construction is divided into several buildings, the subject of the thesis is primarily the solution SO.01 - Housing for seniors
|
|
|
Social and shopping center in Třebíč
Plecitý, Karel ; Semrád, Antonín (referee) ; Štěpánek, Ladislav (advisor)
This diploma thesis deals about plan of the building Social and shopping center in the city Třebíč and about processing of documentation for this buliding as well. The building is situated in the city area called Borovina. In the building is located multifunction cinema, café and four shops, including their rear. Part of the building containing shops has two floors. Part of the building including café and multifunction cinema is designed as a single-storey. The supporting system of the building consists of monolithic reinforced concrete frame. Infill walls of the building is made by structural system Heluz. The building is covered with flat roofs. The building is designed from traditional building materials.
|
|
|
Multifunctional house Arthur
Zigo, Peter ; Jelínková, Barbora (referee) ; Ostrý, Milan (advisor)
The diploma thesis deals with a project design documentation of a multifunctional house in Považská Bystrica. The object is designed as a detached four-storey building. Its ground plan is rectangle-shaped. The building´s first floor is split into an administrative section and housing section with shared premises. The other floors are fully designed and meant for housing consisting of housing units with shared premises. A construction system is designed as a transversal wall system with reinforced concrete continuous slabs roofed with a warm flat duo roof.
|
|
|
Ceiling construction with prestressed girder
Skuhravý, František ; Klusáček, Ladislav (referee) ; Perla, Jan (advisor)
The bachelor’s thesis process design of floor structure, which consists continuous cast-in-place reinforced concrete slab with three spans. The slab is supported by post-tensioned flat beams. These are pin-supported by pillars on outer edges, inner supports are ensured by columns. Comparison of the options of prestressing reinforcement with and without bond precedes designing of the beam itself. Based on its results a suitable option is chosen and then applied on a whole structure.
|
|
|
The design of reinforced concrete ceiling
Burda, Patrik ; Zlámal, Martin (referee) ; Švaříčková, Ivana (advisor)
The bachelor thesis is focused on the static solution of monolithic reinforced concrete continuous ceiling and a beam in a single family house. The entire structure of ceiling is designed of reinforced concrete. Software Dlubal RFEM is used to determine the effects of load. It works with the finite element method. Assessment of elements is according to the first limit state and also the second limit state. The thesis includes statics calculation, dimensioning of reinforcement, drawing of shape and reinforcement drawings of solved elements.
|
|
|
Structure of apartment building – selected elements
Kanichová, Barbora ; Švaříčková, Ivana (referee) ; Perla, Jan (advisor)
The aim of the bachelor thesis is selected construction elements of low-rise apartment building. Reinforced concrete slab of the upper floor is solved in this thesis. The requirement to limit the propagation of impact noise from the staircase to the building and thermal bridge interruption was taken into account in the design of the construction. The deformation of the ceiling structure was verified regarding the integrity of the deposited infill structures. RFEM 5.18 software is used to solve internal forces. All the calculation are performer according to ČSN EN 1992-1-1 and ČSN 73 1201.
|
|
|
Housing for Seniors
Pilík, Václav ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The diploma thesis is elaboration of project documentation of the object Housing for seniors in Brno - Dolní Heršpice. The site is located un the area with the planned development of the city. The object is detached, three-story with a partial basement. The building is divided into five parts. The building is based on concrete foundation pads and strips. The structural construction is a combined column and wall system in technological design as monolithic concrete. The building is designed as a low energy building, with contact insulation (ETICS). The whole building is designed with forced air exchange. An extensive and intensive walkable flat roof is designed. The aim is to create small, barrier-free, community housing with affordable services and support, with a possible life expectancy. Services for the elderly with reduced self-sufficiency and with mild health and mental dysfunctions are considered. The building is equipped with space for accommodation with a capacity of 48 beds, space for eating with a separate kitchen, space for leisure and physical activities, space for basic health and social care and space for administrative and technical facilities. The construction is divided into several buildings, the subject of the thesis is primarily the solution SO.01 - Housing for seniors
|
|
|
Ceiling construction with prestressed girder
Skuhravý, František ; Klusáček, Ladislav (referee) ; Perla, Jan (advisor)
The bachelor’s thesis process design of floor structure, which consists continuous cast-in-place reinforced concrete slab with three spans. The slab is supported by post-tensioned flat beams. These are pin-supported by pillars on outer edges, inner supports are ensured by columns. Comparison of the options of prestressing reinforcement with and without bond precedes designing of the beam itself. Based on its results a suitable option is chosen and then applied on a whole structure.
|
guest ::
