|
|
Electrode Materials for Li-S Batteries
Jaššo, Kamil ; Almáši,, Miroslav (referee) ; Syrový,, Tomáš (referee) ; Kazda, Tomáš (advisor)
This thesis is focused on the research of electrode materials for lithium-sulphur (Li-S) batteries, with an emphasis on the optimization of the process of preparation of positive electrodes through the modification of the individual technical steps of the manufacturing process and the selection of a suitable binder. The theoretical part of the thesis is devoted to terminology and battery issues with emphasis on Li-S batteries, their working principle, shortcomings, critical parameters for commercialization and existing research in this field. The practical part of the thesis deals with the influence of the compression pressure used in the production of positive electrodes on the electrochemical properties of the resulting Li-S cells. In the next part of the thesis, the influence of the binder used on the resulting electrochemical properties is investigated. In the following sections, the influence of the thickness of the electrode material layer and the ratio of its individual components (C/S) on the resulting electrochemical properties of the Li-S cell is analyzed. On the basis of the measured results, the optimum conditions for the preparation of the positive electrodes of the Li-S cells have been identified with respect to the individual technical steps of the manufacturing process.
|
|
|
Vliv teploty lepidla a povrchu adherendu na hloubku penetrace lepidla do masivního dřeva
Voldřichová, Anna
The final thesis deals with the influence of different gluing conditions on the depth of penetration of the adhesive into the surface of solid wood, specifically of the influence of increased pressure during pressing. Furthermore, the thesis investigates the effect of penetration on the strength of the glued joint under tensile loading. Specimens of spruce and oak wood were glued with UF glue and PVAC glue, pressed under different compression pressures and then subjected to tensile test. SEM analysis on an electron microscope was used to evaluate the depth of penetration. The results of the investigation of the effect of ink on the strength of the bonded joint and the penetration depth of the adhesive into the material are also included. The ink was used in the adhesive mixtures for the purpose of colouring the bonded joint.
|
|
|
Diagnostika motoru Škoda 1,4 MPi
TRNKA, Jaroslav
The bachelor's thesis deals with engine diagnostics od Škoda Fabia 1st generation vehicles with a 1.4 16 V 55 kW petrol engine, MPi injection and the BKY engine code. The diagnostic measurement was performed on two vehicles, which differ in the work according to the colour of the body. The first chapter describes the diagnostic equipment used in vehicle repair and maintenance. The next chapters deal with the goal and methodology of the bachelor's thesis, ending with the results, discussion and conclusion.
|
guest ::
