|
|
Impact of macro channels on mechanical stability of bone scaffolds during indirect 3D printing
Vojníková, Michaela ; Novotná, Lenka (referee) ; Salamon, David (advisor)
Porous materials are currently subject to the great interest of tissue engineering. They provide unique properties such as bioactivity, biodegradability, osteoconductivity, and vascularization. Particularly, ceramic porous systems show appreciable potential in medical applications. However, there is a crucial problem with the porous scaffold on account of their bad mechanic properties and therefore they are presently used only at low-load locations. This thesis focuses on the preparation of the scaffolds made of hydroxyapatite by using the freeze-casting method where the indirect 3D printing was applied to get open channels with the size over 200 µm. It also compares the mechanical properties of the scaffolds with different internal structures and monitors how the implementation of different types of grids affects the resulting stability. The scaffolds were prepared with a different arrangement of macro-channel in the internal structure, but they had equal dimensions as common property. The 3D grid was implemented before freezing into the mold and afterward the grid was eliminated by sintering, leaving only a channel system with the size 540-600 µm in the final scaffold. The influence of the type of the 3D grid on the resulting mechanical stability of the scaffold was determined. Rotation of this grid does not have a significant effect on the result, while it only helps with cracking in the direction of the helix. The combination of these methods reports very good controllability with directed macro-channels in the resulting scaffold and therefore it is suitable for the preparation of the bone-implants with different structures.
|
|
|
Shaping of bioceramic hydroxyapatite scaffolds on micro level
Pejchalová, Lucie ; Novotná, Lenka (referee) ; Salamon, David (advisor)
Due to increasing average age of population around the world, there are more patients who need surgery of musculoskeletal system. In some cases, it is even necessary to implant new bone scaffold or replace joints. Hydroxyapatite is the most frequently used material for its biocompatibility and bioactivity. On the other hand, mechanical properties constraints its use in porous scaffolds. The method providing both good mechanical stability and high porosity is freeze – casting. This method utilises controlled freezing to form lamellar structure. During freezing of slurry, ice crystals grow in direction of temperature gradient. In next step, ice crystals are removed by lyophilisation and lamellar structure is revealed. This structure is relatively unstable and needs to be reinforced by sintering. There are many aspects affecting resulting structure – freezing schedule, slurry concentration etc. We used water/ceramic slurries in various concentrations of hydroxyapatite (7,5 % vol., 10 % vol., 15 % vol. and 20 % vol.). These slurries were used for preparation of porous bone scaffolds. We tried to add 3D mash to form net of channels and we observed favourable changes in porosity. 3D mash was removed during sintering. Resulting bioceramics structure was highly porous (up to 90 %). These scaffolds had an acceptable ration between porosity and mechanical stability, too. We considered, adding of 3D mash, as good way to form channels of desired properties.
|
|
|
Replacement of human bones by synthetic materials using 3D printing
Svoboda, Štěpán ; Sedlák, Josef (referee) ; Zemčík, Oskar (advisor)
The thesis is divided into three main parts. The first section summarizes the theory of the issue. Here we are unified theoretical information about the various possibilities of different approaches. The result of this part is therefore a general summary of theoretical possible procedures of creation bone implant, where each are listed the advantages and disadvantages. The theoretical part also contains information that ultimately, in practice, the author did not use. But his idea was to create a comprehensive look at the issue from several angles. The second part uses theoretical knowledge from the previous set of information as a basis for defining the steps required to successfully manage the issues of bone 3D printing. The third part will follow the guidelines of both previous and focuses on practical making bones and subsequent evaluation method chosen. There are discussed various steps that led to the final conclusion, making bones and work is then focused on the evaluation of the success of selected procedures and recommendations for future action.
|
|
|
Impact of macro channels on mechanical stability of bone scaffolds during indirect 3D printing
Vojníková, Michaela ; Novotná, Lenka (referee) ; Salamon, David (advisor)
Porous materials are currently subject to the great interest of tissue engineering. They provide unique properties such as bioactivity, biodegradability, osteoconductivity, and vascularization. Particularly, ceramic porous systems show appreciable potential in medical applications. However, there is a crucial problem with the porous scaffold on account of their bad mechanic properties and therefore they are presently used only at low-load locations. This thesis focuses on the preparation of the scaffolds made of hydroxyapatite by using the freeze-casting method where the indirect 3D printing was applied to get open channels with the size over 200 µm. It also compares the mechanical properties of the scaffolds with different internal structures and monitors how the implementation of different types of grids affects the resulting stability. The scaffolds were prepared with a different arrangement of macro-channel in the internal structure, but they had equal dimensions as common property. The 3D grid was implemented before freezing into the mold and afterward the grid was eliminated by sintering, leaving only a channel system with the size 540-600 µm in the final scaffold. The influence of the type of the 3D grid on the resulting mechanical stability of the scaffold was determined. Rotation of this grid does not have a significant effect on the result, while it only helps with cracking in the direction of the helix. The combination of these methods reports very good controllability with directed macro-channels in the resulting scaffold and therefore it is suitable for the preparation of the bone-implants with different structures.
|
|
|
Corrosion Testing Of Biodegradable Bone
Implants
Galanová, Zuzana
This article is focused on the part of my master´s theses which discusses the corrosion of biodegradable bone implants in solutions which simulate human blood environment. It explains use of Tafel Analysis for corrosion measurements and the way how those measurements were done. At the end of article results are being described and analyzed.
|
|
|
Replacement of human bones by synthetic materials using 3D printing
Svoboda, Štěpán ; Sedlák, Josef (referee) ; Zemčík, Oskar (advisor)
The thesis is divided into three main parts. The first section summarizes the theory of the issue. Here we are unified theoretical information about the various possibilities of different approaches. The result of this part is therefore a general summary of theoretical possible procedures of creation bone implant, where each are listed the advantages and disadvantages. The theoretical part also contains information that ultimately, in practice, the author did not use. But his idea was to create a comprehensive look at the issue from several angles. The second part uses theoretical knowledge from the previous set of information as a basis for defining the steps required to successfully manage the issues of bone 3D printing. The third part will follow the guidelines of both previous and focuses on practical making bones and subsequent evaluation method chosen. There are discussed various steps that led to the final conclusion, making bones and work is then focused on the evaluation of the success of selected procedures and recommendations for future action.
|
|
|
Shaping of bioceramic hydroxyapatite scaffolds on micro level
Pejchalová, Lucie ; Novotná, Lenka (referee) ; Salamon, David (advisor)
Due to increasing average age of population around the world, there are more patients who need surgery of musculoskeletal system. In some cases, it is even necessary to implant new bone scaffold or replace joints. Hydroxyapatite is the most frequently used material for its biocompatibility and bioactivity. On the other hand, mechanical properties constraints its use in porous scaffolds. The method providing both good mechanical stability and high porosity is freeze – casting. This method utilises controlled freezing to form lamellar structure. During freezing of slurry, ice crystals grow in direction of temperature gradient. In next step, ice crystals are removed by lyophilisation and lamellar structure is revealed. This structure is relatively unstable and needs to be reinforced by sintering. There are many aspects affecting resulting structure – freezing schedule, slurry concentration etc. We used water/ceramic slurries in various concentrations of hydroxyapatite (7,5 % vol., 10 % vol., 15 % vol. and 20 % vol.). These slurries were used for preparation of porous bone scaffolds. We tried to add 3D mash to form net of channels and we observed favourable changes in porosity. 3D mash was removed during sintering. Resulting bioceramics structure was highly porous (up to 90 %). These scaffolds had an acceptable ration between porosity and mechanical stability, too. We considered, adding of 3D mash, as good way to form channels of desired properties.
|
guest ::
