|
|
Design and analysis of reinforced concrete or masonry structures
Skočdopole, Jakub ; Švaříčková, Ivana (referee) ; Požár, Michal (advisor)
The bachelor's thesis deals with the static solution of the reinforced concrete ceiling slab and the inclined column of a 2-storey multi-storey building. The first part is devoted to the design of a point-supported plate, a cross-reinforced plate and an inclined column inclined by 15° from the vertical structure according to the limit state method. A spatial 3D model was created in the SCIA Engineer program, which was used to determine the internal forces in the structure. The correctness of the model results was verified by the sum of moments method. The second part deals with the study of the influence of the slope of the columns on the structure, when one row of columns in the 2nd floor was inclined and then the effect of this change on the structure and the static assessment were compared. Reference slopes chosen for the study: 0°; 15°; 30°; 50°, a partial spatial 3D model of the structure was created for each variant. The appendix of the bachelor's thesis is a detailed static calculation according to valid ČSN EN standards, drawing documentation and a study of the influence of the inclination of one row of columns on the reinforced concrete structure.
|
|
|
Energy passive block of apartments
Niesner, Daniel ; Mrkos,, Dan (referee) ; Sedlák, Jiří (advisor)
The goal of the project si developnemt of project documentation for a construction realisation of energy passive block of apartments together with design of conception of forced ventilation with recuperation unit. The design of building is conceived as building with flat roof, reinforced concrete load-bearing structure and collective underground parking. During the design emphasis was placed on low energy consumption of the building. Its energy efficiency was analysed according. ČSN 73 0540 and processed statement of energy efficiency. The result energy consumption of the structure is A – extremely efficient.
|
|
|
Multipurpose building
Řezníček, Marek ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
The diploma project is involved in structure design of multipurpose house. It´s four floor building with one underground floor and flat roof. Structure system is reinforced concrete skeleton. Ceilings are solved as reinforced concrete slabs, spot supported by columns with circuit reinforcing beam.
|
|
| |
|
|
Static solution of the underground floor of an apartment building in Oslavany
Šafránková, Vendula ; Švaříčková, Ivana (referee) ; Zich, Miloš (advisor)
The subject of the bachelor thesis is the design and static analysis of underground carpark, which is part of an apartment building. This new development will be situated in Oslaveny. For the work was used drawings with a basic floor plan dimension and heights. The work includes a static calculation and drawing documentations. Static calculation is solved by a combination of manual calculation and software´s calculation. SCIA Engineer 22.0 program is used to calculate the internal forces. The design of the shear reinforcement is performed using Schöck Bole program. The static calculation includes design and assessment point-supported slab and columns and caps. The structure is designed according to valid standards ČSN EN.
|
|
|
Static solution of a typical underground floor of a tall building in Prague
Maršálek, Filip ; Šimůnek, Petr (referee) ; Zich, Miloš (advisor)
This bachelor's thesis deals with the static design of the ceiling structure of a high-rise building. The basis for the bachelor was drawing documentation with basic plan dimensions and heights. The aim of the work is to design a locally and point-supported ceiling slab in the form of a section of one floor, specifically the ceiling above the second underground floor. According to the assigned study, a board model was created in the SCIA Engineer program for the analysis of internal forces, on the basis of which the design of the bending reinforcement of the board was carried out for the limit state of bearing capacity. The design of the shear reinforcement is based on the internal forces from the 2D model and was carried out using the Schöck Bole program with manual verification of selected parts. Furthermore, crack widths were manually calculated and verified via SCIA Engineer. The last calculation was a non-linear deflection calculation in SCIA Engineer. The conclusion of the work was the design of a variant with headers and a comparison of both types of boards. The work includes static calculation and drawing documentation.
|
|
| |
|
|
Multipurpose building
Řezníček, Marek ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
The diploma project is involved in structure design of multipurpose house. It´s four floor building with one underground floor and flat roof. Structure system is reinforced concrete skeleton. Ceilings are solved as reinforced concrete slabs, spot supported by columns with circuit reinforcing beam.
|
|
|
Energy passive block of apartments
Niesner, Daniel ; Mrkos,, Dan (referee) ; Sedlák, Jiří (advisor)
The goal of the project si developnemt of project documentation for a construction realisation of energy passive block of apartments together with design of conception of forced ventilation with recuperation unit. The design of building is conceived as building with flat roof, reinforced concrete load-bearing structure and collective underground parking. During the design emphasis was placed on low energy consumption of the building. Its energy efficiency was analysed according. ČSN 73 0540 and processed statement of energy efficiency. The result energy consumption of the structure is A – extremely efficient.
|
guest ::
