|
| |
|
|
DSL analyzer
Hála, David ; Číž, Radim (referee) ; Šilhavý, Pavel (advisor)
This bachelor thesis is devoted to the development of an application for signal analysis using xDSL technology. The first part of the thesis describes the basics of these tech- nologies and the theoretical assumptions that can be expected in later analysis. Also the parameters measured by the resulting application are explained. The second part of the thesis is devoted to the description of the procedure and solution of the practical part of the thesis - program development. Finally, in the last chapter of the thesis, the program was tested in laboratory conditions and graphs were constructed from the results.
|
|
|
Simulation of ADSL error protection systems
Bernat, Zbyněk ; Krajsa, Ondřej (referee) ; Šilhavý, Pavel (advisor)
The main objective of this thesis was to create a model of forward error correction (FEC) system used in ADSL modem, which will be able to check its individual settings using the test methods specified in Recommendation G.996.1. The work is divided into two basic parts – theoretical and practical. The first part describes the basic functional characteristics of ADSL system, with attention being paid to aspects affecting the activity and setting of the error protection system. There are also discussed the theoretical basics of FEC coding techniques used in ADSL. The work also contains a description of the method for testing DSL system resistance against impulsive interference, which is specified in Recommendation G.996.1. The practical part of this thesis contains a description of the proposed model of the FEC system. The model was implemented in the programming environment Matlab Simulink. The proposed model includes the simulation of FEC coding process, DMT modulation and transmission channel with the impulse interference and the background noise. The proposed program is able to calculate parameters for setting FEC system from the specified data transfer rates and the requirement for interleaving. In addition, allows you to set the parameters of transmission line and sources of impulse interference and of the background noise. Under the set of input characteristics of the transmission is calculated bit allocation and the resulting parameters are given to a computational core of the model. In the application can be performed two types of test tasks. The first one is based on the Recommendation G.996.1 and makes it possible to determine probability of errored second. The second test task is for the measurement of resistance of the transmission system against impulsive interference. The results of the simulations are summarized in the conclusion of work.
|
|
|
DSL-based triple-play services
Al-Anqari, Mhannad ; Křepelka, Václav (referee) ; Šilhavý, Pavel (advisor)
This research examines the triple play service based on the ADSL technology. The voice over IP will be checked and combined with the internet data by two monitoring programs in order to examine the performance that this service offers and then will be compared with the usual method of internet connection.
|
|
|
Phone line simulator
Vítek, Jiří ; Vařacha, František (referee) ; Prokeš, Aleš (advisor)
This master’s thesis is focused on the problems of designing telephone lines which are 7 km long with a step of 1 km. The thesis contains a detailed description of the basic parameters of metallic transmission lines. There is also briefly mentioned the issue of interfering the transmission lines. The main part is devoted to a system design of artificial lines connection, including printed circuit board design. The next section deals with a design of prototype controlling. The last part verifies the activity of implemented artificial lines.
|
|
|
Automation of measurement of disturbance influence on xDSL technologies
Röszler, Pavel ; Číž, Radim (referee) ; Šilhavý, Pavel (advisor)
This work focuses on interference of DSL transmission, measurement and testing with Spirent noise generator and injection unit. Deals with proposition of automated measurement of transmission bit rate dependency on wireline lenght and noise type and level. In theoretical part are described ADSL technology and noise types. Following part focuses on measurement setup and description of wireline simulator units E414 and 8234, gene- rator DLS-5800 a injection unit DLS-5410DC by Spirent company. Main part describes generator and injection unit control software and remote control commands, which are used for automated measurement. There are also described xDSL Measure tool software, which is using for automated measurement with wireline simulators and upgrade, which implements remote communication with generator a injection unit, for remote control and automatic changing noise types generated at the output.
|
|
|
DSL analyzer
Hála, David ; Číž, Radim (referee) ; Šilhavý, Pavel (advisor)
This bachelor thesis is devoted to the development of an application for signal analysis using xDSL technology. The first part of the thesis describes the basics of these tech- nologies and the theoretical assumptions that can be expected in later analysis. Also the parameters measured by the resulting application are explained. The second part of the thesis is devoted to the description of the procedure and solution of the practical part of the thesis - program development. Finally, in the last chapter of the thesis, the program was tested in laboratory conditions and graphs were constructed from the results.
|
|
| |
|
|
Automation of measurement of disturbance influence on xDSL technologies
Röszler, Pavel ; Číž, Radim (referee) ; Šilhavý, Pavel (advisor)
This work focuses on interference of DSL transmission, measurement and testing with Spirent noise generator and injection unit. Deals with proposition of automated measurement of transmission bit rate dependency on wireline lenght and noise type and level. In theoretical part are described ADSL technology and noise types. Following part focuses on measurement setup and description of wireline simulator units E414 and 8234, gene- rator DLS-5800 a injection unit DLS-5410DC by Spirent company. Main part describes generator and injection unit control software and remote control commands, which are used for automated measurement. There are also described xDSL Measure tool software, which is using for automated measurement with wireline simulators and upgrade, which implements remote communication with generator a injection unit, for remote control and automatic changing noise types generated at the output.
|
|
|
DSL-based triple-play services
Al-Anqari, Mhannad ; Křepelka, Václav (referee) ; Šilhavý, Pavel (advisor)
This research examines the triple play service based on the ADSL technology. The voice over IP will be checked and combined with the internet data by two monitoring programs in order to examine the performance that this service offers and then will be compared with the usual method of internet connection.
|
guest ::
