|
|
Cement worm conveyor
Šulc, David ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
This bachelor´s thesis contains of a detail and design of a sloping cement worm conveyor, based on specified parameters. This work deals with the calculation of the main conveyor parts, design size and strength of the control sections. Then there is also a solution method of storing a worm shaft. The thesis is composed of technical reports and drawings, which includes general assembly drawings, assembly drawing of the screw, and a list of items.
|
|
|
Worm conveyor
Bláha, Tomáš ; Škopán, Miroslav (referee) ; Malášek, Jiří (advisor)
This barchelor’s thesis revers to design calculaton of the main parts of worm conveyor for dry hydrate. Thesis is divided to two parts, text and design. Both of these refers to the consructional analysis which deals with powering, imposition of bearings and endurance check of the main parts of the conveyor.
|
|
|
Mechanical pretanning in sewage works
Černý, Marian ; Grosman, Martin (referee) ; Němec, Zdeněk (advisor)
The bachelor thesis contains a literature search dealing with mechanical equipment of waste water treatment plants. After introduction of waste treatment there is stated some description of technical and construction search of particular equipment, system of their operating, analysis of their operation parameters and their using on waste water treatment plants in this bachelor thesis. There are described typical ordering of particular equipment in to technological lines on waste water treatment plants. The bachelor thesis contains description of self-cleaning screen, hand skimmed screen, mechanical coarse screen, mechanical fine screen, equipment for grit and sand removing, skimmed cylinder strainers, screw conveyors, screw presses for screenings with washing and integrated coarse pre-treatment. There are published some schemes, sketches, photos and tables of technical parameters above mentioned equipment in this bachelor thesis. The sketches of technical drawing character are treated in Autodesk ACAD 2005 program.
|
|
|
Worm conveyor
Tvrdík, Tomáš ; Škopán, Miroslav (referee) ; Malášek, Jiří (advisor)
This bachelor’s thesis refers to design calculation of main parts of worm conveyor for dry hydrate, design of propulsive system and soliditidy control of functional parts. Constructional analysis refers to imposition of bearings, safety of operation and ease of maintenance.
|
|
|
Cement worm conveyor
Fránek, Martin ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
This bachelor project contains of a detail and design of a sloping cement worm conveyor. The project consists of technical specifications and drawing documentation. The technical specifications deal with basic design, calculations and stress analysis. The drawing documentation reflects the main assemble conveyor, a bill of material and welding assembly of the spiral worm.
|
|
|
Worm conveyor
Pelka, Tomáš ; Škopán, Miroslav (referee) ; Malášek, Jiří (advisor)
This bachelor project deals with, specifies and makes design of the worm horizontal conveyor. The project is divided into drawings and written part including the funcional capacity calculation and electromotor output. Further the part includes proposal of key dimensions of the conveyer with the soilidity control of the worm, solving of the suspended bearings, assemble issues, maintenance and potencial exchange of the worm due to abrasion.
|
|
|
Horizontal worm conveyor for transport of pit cole
Průša, Ondřej ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
The aim of thesis is to design and process design proposal worm conveyor for transport of small coal. The work addresses in particular the calculation of the main dimensions of conveyors, conveyor drive option, due to possible congestion. It is also attention to the choice of bearings and couplings. The conveyor are inspected strength critical points on the shaft (per deformation, indentations), and place it to the worm shaft and connecting pins. In the last part is given to the operation of the entire facility and its smooth operation.
|
|
|
Cement worm conveyor
Weingärtner, Jan ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
This bechelor‘s thesis deal with constructional analysis of the worm conveyor. I describe here design calculation of main parts of conveyer, design of propulsive system, solidity control of functional parts, problem of heat dilatation while higher temperatures transported materials and way of mode imposition shaft.
|
|
|
Worm conveyor of fine aggregate
Vosika, Jan ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
The main aim of the thesis was to design a horizontal worm-conveyor for the transport of fine aggregate of maximum aggregate gradation of 45 mm, both in terms of construction and strength. The design section of the thesis deals with the problem of an appropriate conveyor driving gear and skidding clutch between the gear and the transport unit according to the amount of transported aggregate. In the computation section, strength check of the drive system is addressed, namely the shaft check, its coupling with the other parts, and the bearing housing. In the last section, the structural design is addressed with respect to safety of operation and ease of maintenance.
|
|
|
Worm conveyor of ciment
Radoš, Pavel ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
This work contains a proposal for construction and workings of a worm conveyor system that can transport 50 tons cement per an hour. The introduction describes my proposal and workings of this machinery. In the calculation, I have mentioned calculation of the main proportions and drive under the relevant norms and self-fortress control of the stressed parts of screw-conveyor. Drawing documentation is worked into the ACad program and contains the configurations of the proposed details sub-assembly storage, worm shaft and welding body formation.
|
guest ::
