|
| |
|
|
Strength analysis of cutting tools
Petrlíková, Helena ; Madaj, Martin (referee) ; Zouhar, Jan (advisor)
This work is focused on the stress-strain analysis of a cutting tool. At the beginning, the study of available literature and scientific articles relating the topic is carried out. The solution of stresses and strains in whole real system has been carried out based on the computational simulation using the finite element method (FEM). The work contains a detailed description of the creation of the computational model. Model of geometry of the system has been created in the SolidWorks program. Computational simulation including the solution was implemented in the ANSYS Workbench program as well as in the classical environment of ANSYS 12.0. This work includes the presentation of results and subsequent stress-strain analysis of the cutting tool. Last part of this work deals with the modal analysis and harmonic analysis of cutting tools made in classical environment of ANSYS program.
|
|
|
A car prototype manufacture using modern methods and CAD/CAM
Horák, Aleš ; Zouhar, Jan (referee) ; Sedlák, Josef (advisor)
The project developed under the engineering studies, solves the problem of production of a prototype car using modern technology, reverse engineering and CAD / CAM. Based on the literary study of the issue, was designed process of digitization of the physical model of car, including the treatment and processing of data. Follow-up step was to verify the production of the additive rapid prototyping technology - FDM method. Verification of the results was performed on a vertical milling cantilever FV 25 CNC with control system Heidenhain iTNC 530 using a cutting strategies by PowerMILL CAM software. At the end of the resulting models edit as necessary.
|
|
|
Creating of technology for turbine wheel machining
Urbánek, Aleš ; Sedlák, Josef (referee) ; Zouhar, Jan (advisor)
This diploma work deals with manufacturing technology of a turbine wheel. In first part is introduced description of equipment used for reverse engineering. In next part are clamping possibilities for cutting operations. The part of this diploma thesis is verification of a semi-product using ATOS system and proposal of establishment and clamping. Purpose of the work is technology preparation and production of clamping device for milling by the machining centre MCV 1210.
|
|
| |
|
|
Optimisation of a part production for aircraft industry
Filipčík, Jiří ; Zouhar, Jan (referee) ; Píška, Miroslav (advisor)
This thesis deals with optimization of production of "Hold-down hinge hook" component, developed from difficult-to-cut titanium alloy Ti-6Al-4V. This work is focused on the material properties of the component, current research and optimization in titanium machinability sphere. Further it contains a part dedicated to the latest trends in development of cutting tools for machining of titanium alloys. This knowledge is furthermore used for the component production optimization in Frencken Brno s.r.o. company. This project continues with analysis of the component‘s current production technology and designs the way of elimination of production bottleneck. This change is presented by component‘s clamp jig, which decreases higher percentage of scrap due to the geometric complexity. This thesis further contains drawing and technological documentation needed for implementation of the improvement suggestions into the production. There was designed a new NC program. This project is accomplished with technical-economical evaluation.
|
|
|
Digitalization of ultra-light plane fuselage for production of accurate mould
Véle, Filip ; Sedlák, Josef (referee) ; Zouhar, Jan (advisor)
This work describes digitalization and creation of ultralight aircraft 3D model in order to create accurate moulds for fuselage lamination. Right choice of technology is based on background research. Designed procedures are described in detail as well as used equipment, hardware and software. Objective of this project is application of available methods of digitalization to create 3D aircraft model and its usage for accurate mould design.
|
|
|
A Cutting Tool for Drilling of Constructional Materials
Stavinoha, Petr ; Zouhar, Jan (referee) ; Píška, Miroslav (advisor)
This thesis deals with the analysis of drilling technology of building materials and design of drilling tools. The thesis analyzes a given cutting materials and usability their applications for drilling of building materials. Further, the thesis deals with the creation of 3D model of drilling tool in SolidWorks environment and preparation of CNC program for cutting centre SP 208 SY which is controlled by Sinumerik system.
|
|
|
Calculation of workpiece deflection when machining
Grebeň, Petr ; Zouhar, Jan (referee) ; Píška, Miroslav (advisor)
Selected chapters of the science branch "Elasticity and strength" applied to manufacturing of thin parts with various solution approaches. Applying theory of bars and a non-linear differential equation for the deflection line of the second order to a machined shaft. Numerical calculation in the ANSYS program. Evaluation and design of solution variants to machine thin shaft parts without supporting them.
|
|
|
Acrylic glass base production to gramophone deck
Bezděk, Filip ; Zouhar, Jan (referee) ; Kalivoda, Milan (advisor)
This thesis is aimed at a very detailed process of a transparent plexiglass used for manufacturing an upstand of a gramophone. The diploma work is mainly focused on various types of the plexiglass, its attributes and the gramophone’s upstand production. Several manufacturing technologies of a plexiglass such as division of a board-type semi product, precise milling, grinding, polishing and thermal treatment are provided in this diploma work through a very detailed description of a production process of a gramophone’s deck. The outcome of this thesis is a description of individual technologies and the economic evaluation within the real business environment of AZ Plastik company.
|
guest ::
RSS feed.