|
|
Design for production of lower part of charging station
Skalník, Petr ; Zavadil, Radek (referee) ; Podaný, Kamil (advisor)
This master’s thesis deals with a proposal of production technology of bottom part of charging station which is manufactured by DEL a.s. The component will be made of austenitic steel 17 349 which is 2 mm thick and its production series is 100 pieces a year. Punching and bending by MAG and TIG methods were chosen as the most suitable methods from the considered manufactoring technologies. Stud bolts will be welded by capacitor discharge. Based on the analysis of the technological calculations and the available machines in the manufacturing company was chosen that production is going to run through a punching press Pullmax 720, hydraulic CNC bending press OptiFlex 130 t 3,1 and welding sources TransPuls Synergic 3200, TransTig 1750 Puls and Nomark 65+. Technical and economical evaluation established cost calculation of semi-finished product material, welding wire, gaseous shield and stud bolts. The price of one piece is 3 117,70 Czech crowns.
|
|
|
Design of robotized workplace for die forging
Krejčí, Radek ; Zavadil, Radek (referee) ; Podaný, Kamil (advisor)
The thesis deals with the design of technology for production of wheels to be manufactured by die forging 15 142 low-alloy steel at an amount of 500,000 items per year. Based on a consideration of the suitable methods of manufacture, die forging on a Jing Duann FP-1600G vertical forging press was chosen as the best, as documented by the necessary technological and design drawings. A die with inserts made of 19 552 steel was designed for this machine. In view of the volume of annual production, a fully automated workplace was designed consisting of three robots and a chain and pan conveyor. In the conclusion there was a technical-economic evaluation of costs for the material of the semi-finished products and price of dies for annual production.
|
|
|
Design of robotized workplace for die forging
Krejčí, Radek ; Zavadil, Radek (referee) ; Podaný, Kamil (advisor)
The thesis deals with the design of technology for production of wheels to be manufactured by die forging 15 142 low-alloy steel at an amount of 500,000 items per year. Based on a consideration of the suitable methods of manufacture, die forging on a Jing Duann FP-1600G vertical forging press was chosen as the best, as documented by the necessary technological and design drawings. A die with inserts made of 19 552 steel was designed for this machine. In view of the volume of annual production, a fully automated workplace was designed consisting of three robots and a chain and pan conveyor. In the conclusion there was a technical-economic evaluation of costs for the material of the semi-finished products and price of dies for annual production.
|
|
|
Design for production of lower part of charging station
Skalník, Petr ; Zavadil, Radek (referee) ; Podaný, Kamil (advisor)
This master’s thesis deals with a proposal of production technology of bottom part of charging station which is manufactured by DEL a.s. The component will be made of austenitic steel 17 349 which is 2 mm thick and its production series is 100 pieces a year. Punching and bending by MAG and TIG methods were chosen as the most suitable methods from the considered manufactoring technologies. Stud bolts will be welded by capacitor discharge. Based on the analysis of the technological calculations and the available machines in the manufacturing company was chosen that production is going to run through a punching press Pullmax 720, hydraulic CNC bending press OptiFlex 130 t 3,1 and welding sources TransPuls Synergic 3200, TransTig 1750 Puls and Nomark 65+. Technical and economical evaluation established cost calculation of semi-finished product material, welding wire, gaseous shield and stud bolts. The price of one piece is 3 117,70 Czech crowns.
|
guest ::
RSS feed.