|
|
Multifunctional house
Strýhal, Martin ; Vlček, Ing Karel (referee) ; Vlček, Milan (advisor)
The diploma thesis deals with the development of the vacant lot in Prague - Libeň at the PCB level. A multifunctional house is designed, which includes three establishments and eleven housing units. The premises will be used as shops. The apartments are designed for 2 to 4-member families. Multifunctional house floor plan with a total area of 683.1 square meters. The building has a basement with five floors, the premises are located on the first floor. There is a pedestrian and driveway to the building. Behind the object away from the main road is an outdoor parking lot. The underground garage will be accessed by a car elevator. The whole building is covered with a sloping roof. The project is processed using the computer program AutoCAD.
|
|
|
Multifunctional building in Uherské Hradiště
Maňásková, Kristýna ; Vlček, Karel (referee) ; Vlček, Milan (advisor)
The subject of diploma thesis is the construction of technical project documentation for building realization - Multifunctional building in the town of. The object has three floors with residential attic and basement garage. The land is in the city center Uherské Hradiště and This is a building in the vacant space between existing objects. Construction is rectangular in shape, roofed with a gable roof and is designed from traditional building materials.
|
|
|
Semi-detached Multifunctional Building in Prostějov
Janeček, Jan ; Vlček, Karel (referee) ; Vlček, Milan (advisor)
This thesis is focused on the design and preparation of project documentation multifunctional building in Prostejov. Building has a basement, six floors and the last floor is the attic. The structural system is longitudinal wall and is made of Porotherm system. Floors are made of ceramic panels Heluz. Roof is designed as Gambrel roof. The building is connected to the next building.
|
|
|
Methodology for Fault Tolerant Systems Design into Limited Implementation Area in FPGA
Mičulka, Lukáš ; Racek, Stanislav (referee) ; Vlček, Karel (referee) ; Kotásek, Zdeněk (advisor)
Tato práce popisuje navrženou metodologii pro návrh systémů odolných proti poruchám v FPGA schopnou ochránit systém před projevy přechodných a trvalých poruch. Oprava přechodné poruchy je prováděna částečnou dynamickou rekonfigurací. Oprava omezeného počtu trvalých poruch je založena na použití odolných architektur využívajících menší množství zdrojů než předchozí použitá architektura. Vadná část FPGA tak není dále využívána. Tato technika je založena na použití předkompilovaných konfigurací uložených v externí paměti. Pro snížení paměťových nároků pro uložení konfiguračních bitových posloupností je použita technika relokace.
|
|
|
Methodology for fault tolerant system state synchronization design and its recovery from faults
Szurman, Karel ; Fišer, Petr (referee) ; Racek, Stanislav (referee) ; Vlček, Karel (referee) ; Kotásek, Zdeněk (advisor)
In this Ph.D. thesis, a new methodology for the fault tolerant system state synchronization design and its recovery from faults is presented. A state synchronization method designed by means of the proposed methodology allows to repair the state of sequential logic elements implemented in the FPGA application logic, which cannot be repaired by the partial dynamic reconfiguration. The proposed methodology describes possible state synchronization design methods with respect to TMR granularity, dependence of the system function on its previous states and the system architecture. The methodology focuses on coarse-grained TMR architectures and state synchronization in the systems controlled by means of finite state machines or a processor. The use of the methodology is demonstrated on the CAN bus control system and the microcontroller NEO430, for which specific synchronization methods were designed. The systems reliability and new ability of the systems for recovery from faults were verified in the presence of simulated SEU faults. The experimental results and the contribution of this thesis are discussed in the conclusion.
|
|
|
End house
Jurkovičová, Lucie ; Vlček, Ing Karel (referee) ; Vlček, Milan (advisor)
This diploma thesis deals with the design of an end dwelling house with a café in Žatec (district of Louny). It is a partly basement, detached object on a slightly sloping terrain. The apartment building has one underground floor and three above-ground floors. It consists of six housing units of varying size and layout. On the ground floor there is a cafeteria, while on the second and third floor there are always 3 flats. The end house has an atypical ground plan and is roofed with honeycomb roof. The project is processed using the ArchiCAD computer program.
|
|
| |
|
|
Multifunctional house in gap site in Praha
Skalický, Martin ; Vlček, Ing Karel (referee) ; Vlček, Milan (advisor)
The aim oh the thesis is the design of a multifunctional building including layout for a particular purpose and design of appropriate structural supporting system. The building is located in a city´s gap site and consists of office space, residential units, a shopping mall and areas for underground parking. The building has two underground and six aboveground floors and is covered by a flat roof. Supporting vertical and horizontal structures are made of reinforced concrete. The thesis consist of technical reports, which are arranged according to Annex 5 of Decree No. 62/2013 and graphic attachments.
|
|
| |
|
|
Multifunctional house
Hamerník, Martin ; Vlček, Ing Karel (referee) ; Vlček, Milan (advisor)
The theme of diploma thesis is processing of the design new multifunctional residential building in Prague. The house has four floors is partly basement. The building is operationally divided into three separate parts. Predominant part of the building is intended for housing, other parts of the establishment is a patisserie and last automatic garage The house is designed of the construction systém Porotherm. The pitched roof is double layer with a wood-steel structure.
|
guest ::
