|
|
City hall with a multifunctional space
Valášek, Radek ; Machová, Petra (referee) ; Vajkay, František (advisor)
The aim of this master thesis is to design a city hall with a multi-purpose hall in Dolany u Olomouc. The building consists of two parts offices and multi-purpose hall. It is a three-storey building with a basement. It has a flat green roof with skylights and photovoltaics. The basement includes storerooms, garage and technical facilities. It is accessible via wooden stairs and the first floor includes offices, storerooms, sanitary facilities and multi-purpose hall. The second floor includes offices, sanitary facilities, mayor´s office with terrace, small cafeteria and a meeting room with a terrace. Load-bearing envelope walls and internal columns in the basement will be made of reinforced concrete. Other load-bearing walls will be made of sand-lime blocks. The floor slabs will be made of cast-in-place reinforced concrete. The building envelope will be insulated with ETICS. Heating will be provided by gas boilers. The building will be airconditioned by an AC unit in the basement. The project was carried out in the AutoCAD, SketchUp and Lumion software.
|
|
|
Multifunctional building object
Bobek, Michal ; Žižka, Lukáš (referee) ; Vajkay, František (advisor)
The master’s thesis solves the design and creation of project documentation for the construction of new multifunctional building on parcel 399/30 in the cadastral area Uherské Hradiště - Mařatice. This building plot is intended for construction and is owned by the town of Uherské Hradiště. The location is located in close proximity to the block of flats Pod Svahy. The enclosed building documentation is made in accordance with applicable laws, decrees and standards. Designed multifunctional house is a multipurpose building with one underground and five above ground floors. Basement areas serve as collective garages and backroom areas for residential units. The first floor has a commercial use with cafes, design offices, copy center and a hairdresser. Other above ground floors serve as permanent accommodation in the form of thirteen residential units. A reinforced concrete monolithic skeleton is designed as a support system. The roof is made in the form of a flat roof. The object is based on a base plate.
|
|
|
Residential building
Valášek, Radek ; Machová, Petra (referee) ; Vajkay, František (advisor)
The subject of the thesis is the processing of project documentation for the construction of a residential building in Olomouc (village Hejčín). It is an object with one underground floor and three above-ground floors. There are 9 residential units in the building. On the first floor there are 3 housing units, one of which is adapted for wheelchair use. There are also 3 dwelling units with the same layout on the second and third floors. The building is designed as a masonry from a construction system of sand-lime blocks. The ceiling structure is made as a ribbed construction consisting of prestressed beams and concrete inserts. The building is covered with a single-layer flat roof. The project documentation also includes a basic assessment of the building in terms of building physics.
|
|
|
City hall with a multifunctional space
Zabáková, Laura ; Machová, Petra (referee) ; Vajkay, František (advisor)
The main task of the master project is to design a nearly zero energy local council building with multipurpose hall in Syrovice cadastral area. It is a three-storey building with basement. In the basement there are technical facilities and garage. Ground floor includes conference room, multipurpose hall, kitchen, cloak room and toilets. First floor includes offices, archive, staff kitchen and toilets. The building’s vertical load-bearing structures are a combination of ceramic block masonry and reinforced concrete columns. Envelope walls are insulated with mineral wool and XPS. The floor slabs and the staircase are designed from cast-in-place reinforced concrete. The building has flat extensive green roofs with photovoltaics installation. The building is equipped with HVAC system with mechanical ventilation with heat-recovery, floor heating and cooling supplied by a ground-water heat pump. The building is also equipped with rainwater accumulation system supplying rainwater for the toilets and watering.
|
|
|
Sportovní centrum "Fit Body"
Janíček, Vít ; Jelínek, Petr (referee) ; Vajkay, František (advisor)
Master thesis processes documentation for the realization of the new building of the multi-functional sporting centre. Object is designed as the two storey building with the external thermal insulation system ETICS. Object is designed according to the appropriate legislation. Object fulfills demands for the low-energy standard. Building is without cellar with the flat warm roof. Load bearing constructions of the floor ceilings are made out of prestressed concrete panels SPIROL. Load bearing construction of the hall roof is made of the glulam timber beams and purlins with the bracing.
|
|
|
Samostatně stojící rodinný dům
Sasko, Richard ; Žižka, Lukáš (referee) ; Vajkay, František (advisor)
My thesis is dedicated to the proposal for a detached family residence. It is an universal design of project documentation, resulting in possible erection of building that meets the standards of the Czech Republic as well as needs of its user. The house is designed as a two-storey, above-ground new work for five membered family. Technically, it is a wood frame construction based on family houses from the USA, Canada and Scandinavia, which is commonly known as 2 by 4 (2x4) or Platform-Frame. Foundations consist of a peripheral strip foundation and concrete footing pads. The roof is considered as flat with an angle of 2 °. Insulation is mineral wool and polystyrene. The building is situated in the district Brno Modrice.
|
|
|
Detached Family Residence
Kadubcová, Denisa ; Omishore, Ayodeji (referee) ; Vajkay, František (advisor)
This Bachelor’s Thesis deals with a design of detached family residence with planner’s office. The house is situated on a specific plot of cadastral area of Brno city, in Soběšice in Rozárka Street. The aim was to create an object suitable for a four-member family by its disposition solution, and fitting the neighbouring buildings by its appearance. The designed house is two-storey, basementless with saddle roof. Peripheral walls of above-ground floors are built from lime-sand blocks of SENDWIX walling system. Contact insulation system was used for thermal insulation of the whole object. Ceiling above first above-ground floor is monolithic reinforced concrete. Load-bearing structure of a roof deck is made of wooden trusses. The work also includes fire safety and thermotechnical solution.
|
|
|
Family residence
Vránsky, Miroslav ; Vacenovská, Veronika (referee) ; Vajkay, František (advisor)
This bachelor thesis deals with desing of timber frame house situated in the catastral unit Andovce, region Nové Zámky, Slovak Republic. It is a detached house with garage standing in a newly created resident area. It is designed for a family of four. There is an individual working place with separate entrance. The house has two floors without basement. Saddle roof is placed above living space of family house and garage has flat roof with attic. House is designed as a timber frame construction covered with gypsum fibreboard Fermacell.
|
|
|
Apartment building "Vacek"
Vacek, Pavel ; Žižka, Lukáš (referee) ; Vajkay, František (advisor)
I have designed the construction of a apartment building with multifunctional usage. A significant element is the internal automatic parking system, which is a relief for the residents of the house on a street crowded with parked cars. On the ground floor is a lucrative cafe with sitting area and two bowling lines. The house contains 18 housing units for 4-6 people. People are attracted by prestigious location with views of the city Brno on the dominant historical monuments and are attracted by a pleasant interior of the apartments, too. They are logically divided into 4 zones - day, night, working and relaxing. For relaxation, they may use the spacious balconies, terraces and a common area in the garden with children's play area. One part of this work is a focus on securing of construction pit and foundation of a building, which is almost a technical delicacy.
|
|
|
Residence "Nová Líšeň"
Velín, Petr ; Jelínek, Petr (referee) ; Vajkay, František (advisor)
Thesis process in the form of project documentation, including all requirements according to applicable regulations. It is a new residential building on plot No. 5049/24 in the cadastral Brno - Lisen. The land is located in a developed area close to existing housing. The land is sloping towards the east. On the north side there is parking for residential units in connection with the entrance to the underground parking garage on the east side. The building's facade is more rugged and achieves approximate dimensions of 20.0 x 30.0 m Residential house is designed as a three-storey building with a basement, with a flat roof. In the basement there is a garage and utility room, the floors are residential units intended for permanent living persons. It is a building with a combined carrying system Porotherm and reinforced concrete structures insulated mineral insulation.
|
guest ::
