|
|
Modern treatments by powder paints
Turek, Tomáš ; Kovář, Petr (referee) ; Kubíček, Jaroslav (advisor)
The thesis deals with the process of powder coating paint, a description of the individual steps and types of used equipment. Thesis also includes the distribution of powder paints and overview of basic information, color chart systems and the description of color tone perception. At the end of the thesis are summary of quality standards of deposited surface and technologic process of coating using in the powder coating in paintshop.
|
|
|
Production technology of plastic threaded adapters
Turek, Tomáš ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
The Master thesis deals with the possible production of the plastic unit with thread. As the most suitable material was chosen the polyformaldehyde (POM), its production label is Delrin 500P NC010 by Du Pont. The thesis consists of a part with the information about the technology of injection molding of plastics and a part where processing parameters for the production of the plastic unit are designed. Part of the solution was to create an assembly design of injection mold. Since the plastic unit with thread is very specificly shaped the form is handled as a slide mold. The mold is pieced together from normalized parts by the Hasco and DME company. The serie of 100 000 pieces would be delivered in 5 months. Because of the cost savings a solution of the cold-runner system was suggested. A suitable injection molding machine was chosen from the calculated values from Arburgfroms – Type 370s Allrounder 500-170.At the end of the thesis costs were evalueted for acquire per one piece of adapter.
|
|
|
Family Tree Maker Tool
Turek, Tomáš ; Svoboda, Martin (advisor) ; Klímek, Jakub (referee)
This thesis describes the development of a desktop application that should allow the user to organize their family tree. The existing solutions, such as MyHeritage or Family Historian, are analyzed first. The detailed specification of the program itself is subse- quently performed, covering the list of requirements, processes, individual entities, and the solution concept. We conclude with the documentation of the already implemented program, which contains programming and installation documentation as well as the user manual. 1
|
|
|
Rozdíl náročnosti zdrojů (energie, voda) u konvenčního a robotického dojení
TUREK, Tomáš
This paper focuses on the differences in electricity and water consumption between conventional and robotic milking parlours. Data collection from consumers was carried out using a questionnaire method. The developed questionnaire was sent to farms with cattle milk production. From the data collected from the consumers, graphs and tables were created from which individual electricity and water consumption can be determined.
|
|
|
Porovnání sběracích lisů při sklizni píce
TUREK, Tomáš
This work deals with the comparison of two round balers with a variable baling chamber (Claas Variant 365 rc pro) and with a variable baling chamber without the possibility of pressure configuration (Krone Comprima F 155 XC baler), for two private farms with the same focus but different machines. The main comparison lies in area performance, quality of work and economic efficiency. The comparison took place on a pre-prepared plot. Each press had half the land.
|
|
| |
|
| |
|
|
Production technology of plastic threaded adapters
Turek, Tomáš ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
The Master thesis deals with the possible production of the plastic unit with thread. As the most suitable material was chosen the polyformaldehyde (POM), its production label is Delrin 500P NC010 by Du Pont. The thesis consists of a part with the information about the technology of injection molding of plastics and a part where processing parameters for the production of the plastic unit are designed. Part of the solution was to create an assembly design of injection mold. Since the plastic unit with thread is very specificly shaped the form is handled as a slide mold. The mold is pieced together from normalized parts by the Hasco and DME company. The serie of 100 000 pieces would be delivered in 5 months. Because of the cost savings a solution of the cold-runner system was suggested. A suitable injection molding machine was chosen from the calculated values from Arburgfroms – Type 370s Allrounder 500-170.At the end of the thesis costs were evalueted for acquire per one piece of adapter.
|
|
|
Modern treatments by powder paints
Turek, Tomáš ; Kovář, Petr (referee) ; Kubíček, Jaroslav (advisor)
The thesis deals with the process of powder coating paint, a description of the individual steps and types of used equipment. Thesis also includes the distribution of powder paints and overview of basic information, color chart systems and the description of color tone perception. At the end of the thesis are summary of quality standards of deposited surface and technologic process of coating using in the powder coating in paintshop.
|
|
|
Use of regression for analysis of attendance of individual teams from NHL
Turek, Tomáš ; Řezanková, Hana (advisor) ; Vrabec, Michal (referee)
This bachelor thesis focuses on an analysis of regression which is concerned with the average of the spectator attendance in home games of individual teams from National Hockey League in the 2014/2015 season. The aim of this thesis is to consider the selected factors which might have an influence over the increase and the decline of attendance and the comparison to the results of selected regression methods at the selection of the variables to the regression model. The main benefit of this bachelor thesis is in the practical application of the analysis of regression including the selection of the best set of the independent variables with the utilization of various regression methods. A part of thesis is also a factual interpretation of the obtained results. For the selection of independent variables was used the stepwise method, forward and backward method.
|
guest ::
RSS feed.