|
Suggestion of tumbling machine's construction
Coufal, Martin ; Pavlík, Jan (referee) ; Synek, Miloš (advisor)
The thesis is in the first part focuses on the description of the technology and tumbling overview of the applications in which it is possible to use this technology. This topic is the description tumbling wet using ceramic beads. In the third part of this work is performed a brief overview of the types of tumbling machines. The following is a list of their own design variant tumbling machine with a choice of optimal design variants. Then follows the design of the tumbling machines, followed by an overview of the calculations. In the last part of this work are the technical parameters of the designed tools, including a description of its operation and maintenance.
|
|
Design of end effector for handling with glass stopper
Hrnko, Lukáš ; Tůma, Jiří (referee) ; Synek, Miloš (advisor)
The diploma thesis deals with the structural design of the end effector for handling with the glass stopper of the hydrogen reactor of high temperature semiconductor diffusion furnace. The work includes the summary of information about semiconductor diffusion furnace, the choice of the appropriate industrial robot, the design of the end effector structural solution, the design of its supporting structure, the power and strength calculation, the design of the end effector control and economic evaluation of its production. The 3D model together with 2D production documentation which contains the assembly drawing of the individual parts of end effector was created on the basis of the end effector design.
|
|
Suggestion of electric scooter
Lamberský, Václav ; Tůma, Zdeněk (referee) ; Synek, Miloš (advisor)
The topic of this master thesis is the design of electric scooter. In the first part of this thesis consists if research of used structural designs and driver types. In following chapters are calculations and selection procedures of the electric motor, batteries and other accessories. Results from previous chapters were used to created complete 3D model of scooter in SolidWorks software. Based on the model, complete technical drawings were created.
|
|
Suggestion of electric scooter
Lasák, Štěpán ; Augste, Jan (referee) ; Synek, Miloš (advisor)
The goal of this master’s thesis is a construction design of an electric kick bike with the motor builded in the axle of the rear wheel. The thesis consists of theoretical part, which is describing electric kick bikes used today and the possibility of motorization. The next part is a construction design with necessary calculations and formulas.
|
| |
| |
|
3D printers
Göbel, Lukáš ; Synek, Miloš (referee) ; Pavlík, Josef (advisor)
Bachelor's thesis is divided into two parts. The first part deals with the general use of 3D printers in the industry, describes the pre-processing and post-processing operations and used materials. The second part is concentrated on the construction solution and describes each principle of the 3D printing machines, including their advantages, disadvantages and applications. Also some selected common printing technologies are mentioned with examples of their parameters and used materials.
|
|
Searches of vertical forging presses
Gavenda, Petr ; Synek, Miloš (referee) ; Pavlík, Jan (advisor)
This thesis summarizes the basic principles of structural design of vertical forging press with emphasis on the description of its main parts. In addition, the text discusses the basic parameters of presses and standard peripherals, the final chapter is devoted to the comparison of representative products of individual manufacturers.
|
| |
| |