|
|
Design of vibrating waste sorter
Taska, Abraham ; Tůma, Zdeněk (referee) ; Synek, Miloš (advisor)
The master thesis deals with a construction proposal for a vibrating sorter of cartridges. The thesis contains the theoretical part characterizing various sorter types of cartridges and describes the principle of sorting with the help of the vibrating sorters. The practical part includes a draft of a drive, calculation of a vibrating sorter, a proposal of compression springs bearing vibration frame and a control calculation of these springs. A complete vibrating sorter of the cartridges is created in a 3D modeling program. The thesis is attached by the drawings of the individual assemblies, subassemblies and individual parts.
|
|
|
Plastic Injection Moulding Machine
Ličko, Ľubomír ; Synek, Miloš (referee) ; Pavlík, Jan (advisor)
This thesis is focused on design of equipment for injection molding. The work discusses current state of technology for injection molding. In the work is conducted structural design of horizontal injection press for plastics processing with horizontal closing movement. Injection molding machine is designed to form the parting plane of maximum dimension 350 x 350 mm.
|
|
|
Design of crane trolley bridge crane
Tvrdoň, Jan ; Synek, Miloš (referee) ; Pavlík, Jan (advisor)
This thesis deals with proposal hoisting device of travelling crab with lifting capacity of 20000 kg for placement in the scrap yard foundries. The main objective is design of bearing elements of cable system (choice of ropes, pulleys, rope drum), strenght calculation block and a proposal to operate the hoisting device (engine, transmission and brake). It also deals with the proposal propel cats (engine, transmission, brakes, wheel load). Drawing documentation contains a set of trolleys, cable drum assembly weldments and detail spigot cable drum.
|
|
|
Suggestion of tumbling machine's construction
Matula, Petr ; Bilík, Martin (referee) ; Synek, Miloš (advisor)
The master´s thesis deals with a suggestion of vibratory tumbling machine´s construction for tumbling of brass cartridges. The thesis contains theoretical part which describes the principle of tumbling and its possibility of using, further characterizes various types of tumbling machines and their parts. Practical part of thesis includes functional calculations of vibratory tumbling machines, draft of power, compression springs bearing tumbling container and control calculation of these springs. Complete tumbling machine is created in a 3D modeling program. Drawing documentation which includes individual drawings of assemblies, secondary assemblies and their particular parts according to task is enclosed.
|
|
|
Suggestion of tumbling machine's construction
Coufal, Martin ; Pavlík, Jan (referee) ; Synek, Miloš (advisor)
The thesis is in the first part focuses on the description of the technology and tumbling overview of the applications in which it is possible to use this technology. This topic is the description tumbling wet using ceramic beads. In the third part of this work is performed a brief overview of the types of tumbling machines. The following is a list of their own design variant tumbling machine with a choice of optimal design variants. Then follows the design of the tumbling machines, followed by an overview of the calculations. In the last part of this work are the technical parameters of the designed tools, including a description of its operation and maintenance.
|
|
|
Design of end effector for handling with glass stopper
Hrnko, Lukáš ; Tůma, Jiří (referee) ; Synek, Miloš (advisor)
The diploma thesis deals with the structural design of the end effector for handling with the glass stopper of the hydrogen reactor of high temperature semiconductor diffusion furnace. The work includes the summary of information about semiconductor diffusion furnace, the choice of the appropriate industrial robot, the design of the end effector structural solution, the design of its supporting structure, the power and strength calculation, the design of the end effector control and economic evaluation of its production. The 3D model together with 2D production documentation which contains the assembly drawing of the individual parts of end effector was created on the basis of the end effector design.
|
|
|
Suggestion of electric scooter
Lamberský, Václav ; Tůma, Zdeněk (referee) ; Synek, Miloš (advisor)
The topic of this master thesis is the design of electric scooter. In the first part of this thesis consists if research of used structural designs and driver types. In following chapters are calculations and selection procedures of the electric motor, batteries and other accessories. Results from previous chapters were used to created complete 3D model of scooter in SolidWorks software. Based on the model, complete technical drawings were created.
|
|
|
Suggestion of electric scooter
Lasák, Štěpán ; Augste, Jan (referee) ; Synek, Miloš (advisor)
The goal of this master’s thesis is a construction design of an electric kick bike with the motor builded in the axle of the rear wheel. The thesis consists of theoretical part, which is describing electric kick bikes used today and the possibility of motorization. The next part is a construction design with necessary calculations and formulas.
|
|
| |
|
| |
guest ::
RSS feed.