|
|
Reinforced concrete aeration tank
Vlach, Jakub ; Strnad, Jiří (referee) ; Šulák, Pavel (advisor)
The aim of this work is to design and static analysis features open embedded aeration tank wastewater treatment plants, in particular the assessment base plate and exterior walls. On the basis of reports is prepared drawings consisting of reinforcement drawings and drawing shapes. The proposal was made on the values of the internal forces of the outputs of computer program SCIA Engineer 2012-Student Edition.
|
|
|
Monolithic concrete building at sewerage plant
Klimeš, Petr ; Bažant, Zdeněk (referee) ; Strnad, Jiří (advisor)
Bachelor's thesis deals with design of monolithic concrete construction with a timber roof truss for a device of sewerage plant. This construction consists of these elements- strip foundation, walls with lintels, slab and timber trusses. This thesis contains static analysis of the component parts and their drawing documentation.
|
|
|
Cast-in-place structure at sewerage plant
Hůrka, Jiří ; Šulák, Pavel (referee) ; Strnad, Jiří (advisor)
The thesis is focused on the design and the assessment of horizontal supporting parts and concrete trough on the sewage pumping station in the Boskovice town. There are parts of thesis: technical report, static analysis, design documentation and visualizations. The technical report describes the proposed solution. Calculation of internal forces was performed by manual calculation and verified by the software RFEM. The design documentation consists of shape and reinforcements drawings of selected structural elements.
|
|
|
Construction of the slab structure above the entrance hall
Novotný, Zdeněk ; Zich, Miloš (referee) ; Strnad, Jiří (advisor)
Bachelor thesis deals with the static solution and design of monolithic reinforced concrete and at the same spot as line supported slabs above the entrance hall Uherské Hradiště hospital. The content bachelor thesis is based on the design and assessment of this element. The assessment of this element by 1 limit state - carrying capacity and 2 limit state - usability.
|
|
|
Resistance of the roof structure loaded with photovoltaic panels
Holoubek, Jan ; Bažant,, Zdeněk (referee) ; Strnad, Jiří (advisor)
The aim of the thesis is to verify the resistance of the roof structure loaded with photovoltaic panels. On the roof of industrial building of rectangular plan with dimensions of 26,5 x 24,5 m in Hlinsko, the investor decided to install photovoltaic panels. Preliminary diagnostic survey showed only flexural reinforcement in the field of all considered load-bearing elements. Bending strength was assessed by these structural elements: reinforced concrete slab, reinforced concrete beam, reinforced concrete grinder. Static calculation includes a minimum reinforcement of support and necessary shear reinforcement, which must be demonstrated by a detailed diagnostic survey. The structural analysis includes the assessment of reinforced concrete beam deflection after loading. All assessments were performed according to currently valid Eurocodes. The calculation showed that all supporting elements meet the bending resistance and deflection of the beam is smaller than the limit value laid down in the EC, so the roof of the hall can be loaded with photovoltaic panels.
|
|
|
Superstructure of the backpart of the family house
Jetmar, Ondřej ; Šulák,, Pavel (referee) ; Strnad, Jiří (advisor)
The thesis accommodates a design of a slab made out of reinforced concrete. On one side, the slab overhangs the load-bearing mansonry. The thesis comprises two solutions. In the first solution, the overhung part of the slab is not supported while in the second solution is this part locally supported by pillars. The thesis contains two variants of the slab design and also evaluation of the results.
|
|
| |
|
|
World production and trade in nonwovens
Strnad, Jiří ; Štěrbová, Ludmila (advisor) ; Tomíček, Luboš (referee)
In the first chapter the diploma work describes the use and production of nonwovens. It proofs the importance and significance of this industry in world economy. In the second chapter there are described barriers of international trade in nonwovens and the need of tariff elimination. Chapter 3 shows consumption, production and foreign trade in nonwovens - globally focused on European Union. In the final chapter the diploma work is focused on the use of nonwovens in the selected sector of hygiene absorbent products.
|
|
|
WTO dispute: Boeing vs. Airbus
Strnad, Jiří ; Štěrbová, Ludmila (advisor) ; Machková, Hana (referee)
In the first chapter there is described process of solving conflicts and it's particular stages. In the second chapter there is characterized profile of companies, their history and their function in concerned countries. In the last chapter there is analyzed in detail the WTO dispute between USA and EU and it's consequences and possible scenarios.
|
|
|
Automobilový průmysl
Strnad, Jiří ; Dvořáček, Jiří (advisor) ; Filip, Josef (referee)
Tato diplomová práce pojednává o aktuálním stavu automobilového průmyslu v České republice. Vychází z dat za rok 2005, charakteristiky vývoje jsou v pěti- nebo desetiletých obdobích. První část pojednává o významu automobilového průmyslu pro ekonomiku ČR, produkční charakteristiky jsou vztaženy k HDP a k zaměstnanosti, dále je uvedena regionální struktura subjektů odvětví, investice a export. V druhé části práce zkoumá český automobilový trh, cenový vývoj a prodané objemy, tuzemskou produkci a prodeje pak i v jednotlivých segmentech trhu podle typu vozidel. Třetí část je zaměřena na trendy, jmenovitě na měnící se preference spotřebitelů, alternativní paliva, ekologii provozu a strategické aliance výrobců. V shrnutí je uvedena SWOT analýza.
|
guest ::
RSS feed.