|
|
Automated workplace for the direct current measurements
Plocr, Radek ; Frk, Martin (referee) ; Rozsívalová, Zdenka (advisor)
The present thesis attempts at an overview of DC methods used for diagnosing electrical isolation systems. It investigates the problem of small currents and how to measure them. Part of the thesis deals with building a workstation designed for long-term monitoring of absorbing characteristics of dielectric materials and it also presents a layout of a workstation used for measuring recovery voltage. Both workplaces are computer-automated using the VEE Pro application provided by Hewlett-Packard. Tests were performed on both workstations and the obtained results were processed in a test report as specified under ČSN IEC 93. During the experiment, every effort was made to ensure and monitor the atmospheric conditions of the measuring process.
|
|
|
Analysis of composite system with different filler ratio
Mydlář, Marek ; Frk, Martin (referee) ; Rozsívalová, Zdenka (advisor)
This master’s thesis applies dielectric relaxation spectroscopy to analyse impact of climatic changes on dielectric properties of composite material samples (TSA 220S varnish combined with 60.030 mica). Experiments aim to analyse effect of mica composite mass ratio (0, 4, 8 and 16 % of mica), relative humidity (0, 33, 55, 65, 75 and 95 %) and temperature (23, 30, 40 and 50 C) on complex permitivity as a function of frequency.
|
|
|
Multistress ageing analysis of the electroinsulating materials
Jeřábek, Michal ; Frk, Martin (referee) ; Rozsívalová, Zdenka (advisor)
This diploma thesis deals with not-aged and thermally, electric and multistress aged slotted isolations dielectric properities experimental probing. Dutiny experiment is watched influence moisture on dielectric properties insulating materiále ISONOMŽNMN. Especially both two permitivity complex components are surveyed, in dependence on the frequency and the temperature changes during thermal, electric and multistress ageing. These characteristics are viewed in light of application the isolation in practice.
|
|
|
Modification of electroinsulating varnish with ground mica
Drápal, Aleš ; Frk, Martin (referee) ; Rozsívalová, Zdenka (advisor)
This master's thesis focuses on composite systems based on varnish combined with different filler ratios of micronized mica. The aim is to analyse impact of the filler on dielectric properties of the varnish, i.e. relative permittivity and loss factor as functions of frequency as well as charging and discharging currents as functions of time. Dielectric mixture formulas are applied on relative permittivity values. Calculated and measured values are compared.
|
|
| |
|
|
The use DC electrical method in diagnostics of insulating materials
Volf, Michal ; Rozsívalová, Zdenka (referee) ; Frk, Martin (advisor)
In this work describe to the Dielectric relaxation spectroscopy for the evaluation of the actual status of insulation systém. The used methods of quantifying the dielectric response in time domain are polarization-depolarization current and recovery voltage measurement and in frequency domain the loss factor and the complex capacitance measurement. Influence of thermal ageing and temperature dependences of charge and dischage currents are observed.
|
|
| |
|
|
Influence of thermal stress on volume and surface resistance of material
Rohel, Tomáš ; Rozsívalová, Zdenka (referee) ; Vaněk, Jiří (advisor)
This document describes the methods to test and measure the protective glasses used in solar panels. The next part of the dissertation covers the evolve summary for the norms of degradation tests. The purpose of this research is to scale the volume and surface electric resistivity of selected materials, as well as, specify the supposed durability of these materials. Evaluation of these features proceeds after enhanced aging by the use of dry heat. Samples of these materials were prepared with the cooperation of the company Solartec s.r.o
|
|
| |
|
|
Physical-chemical property characterisation of thin reflective layers on silicon substrates
Rozsívalová, Zdeňka ; Studýnka, Jan (referee) ; Krčma, František (advisor)
This thesis deals with surface analysis and characterization of optical features of thin films created by hexamethyldisiloxane (HMDSO) plasma polymerization on silicon wafers. The RF plasma industrial deposition equipment was used for the thin layers formation. These thin films serve as protective coatings on the reflective layer in the car light or solar panels. Theoretic part gives basic information about plasma, its occurrence, features, diagnostics and applications. Thin layers, their production and characterization are discussed here, too. Theoretic description of monomer material (including the group of other organosilicones) is also presented here. The FTIR spectroscopy and elipsometry are mentioned as the main methods for thin films characterisation. Because material during its practical use degrades due to external conditions, the influence of them on the thin layer properties is studied using the accelerated aging of created films. Industrial deposition chamber AluMet 1800V made by Leybold Optics, Ltd. installed in Zlin Precision company was used for the thin films production. Thin films were created under different conditions that were selelected near to the real conditions used in technology. Various applied powers (2-5 kW) were used for the deposition under different monomer flows. Further, the influence of oxygen addition on the created film properties was investigated. The deposition process was monitored by optical emission spectroscopy. The spectrometer Jobin Yvon Triax 320 with CCD detector was used. The selected part from every samples set was exposed by UV radiation (48 hours at radiation density of 0.68 W/m2 at 340 nm) to simulate the probable conditions during the layers real use. The surface properties were investigated by measurement of reflected light spectral intensity in the visible range at different angles. The angle between incident and reflected beam was varied in the interval of 40 - 150° with 10° step. The influence of sample preparation conditions as well as their aging effect was studied at the selected angles. Spectral reflectance doesn´t depend significantly on applied discharge power and oxygen addition. The significant shift of reflectance into the red part of spectrum was observed at UV exposed samples more or less independently on the applied discharge power of monomer flow rate. Addition of oxygen during the deposition suppresses this effec significantly. Characterization of thin layer structure was done by FTIR spectroscopy. No significant changes were observed in the structure at different discharge powers of monomer flow rates except total absorption intensities that are proportional to the layr thickness. The oxygen addition, of course, changes the structure significantly. These results are only preliminary because the layers were very thin (deposition conditions were near to the common process standard) and thus the signal/noise ratio was relatively low.
|
guest ::
RSS feed.