|
|
Influence of process parameters in forward extrusion on the die loading
Pokorná, Jana ; Návrat, Tomáš (referee) ; Petruška, Jindřich (advisor)
One of the decisive factors of effective using of forward extrusion technology is lifetime of forming tools. Die is very loaded forming tool which loading and therewith related lifetime can be significantly affected by its construction. Construction also affected quality of extruded material. Finete element method allows to simulate this process and assess force which is needed to extrusion and state of stress in die and extruded material. Numerical simulation was realized in program ANSYS 11.0. Influence of reduction, angle of reduction, lenght of extruded material, rounding transition of die parts, extruded material and friction coefficient on die loading and emergence of cracks in extruded material was set in this diploma thesis. Results can be used to die construction optimalization.
|
|
|
Implementation, Calibration and Application of Ductile Fracture Conditions in FEM Programs
Kubík, Petr ; Plánička, František (referee) ; Kotoul, Michal (referee) ; Petruška, Jindřich (advisor)
The presented work is concerning with ductile fracture problematic under monotonic loading which is result of gradual material degradation at large plastic deformation. At present, a large number of models, which calibration is not trivial, are used for its prediction. Ductile fracture mechanisms and cut-off region are described in the literature search part. Next, there is given a summary of criteria which are based on different approaches to ductile fracture. There were proposed and used KHPS and KHPS2 criteria within this PhD thesis. Procedure of assessment of the stress-strain curve and ductile fracture criteria calibration are described in last part of the literature search. A summary of tests, which were done in order to calibrate chosen criteria, is given in experimental part. Various stress states within broad range of stress triaxiality and Lode parameter were reached using these tests. Special type of specimen, by which very low stress triaxiality value is reached, was designed within this work. All specimens were made from the steel 12 050. Wrought rods of one melt with circular cross-section of 27 mm in diameter were used as semi-product. Calibration of chosen ductile fracture criteria was performed using foregoing tests. These criteria were implemented by author into explicit finite element software ABAQUS/Explicit using user subroutine VUMAT. Chosen criteria were used for simulation of multistep extrusion at which formation of internal central cracks occurs. These criteria were also used for simulation of cutting of circular cross-section rods. Results from simulation were compared to experiments which were done by industrial partner J-VST.
|
|
|
Strength and deformation analysis of parametric family of hydraulic stretchers
Jagoš, Jiří ; Vosynek, Petr (referee) ; Petruška, Jindřich (advisor)
The master thesis is focused on an evaluation of a preload lost in a tappered joint. The analyzed bolts are preloaded by a hydraulic tensioner. When the tensioner is removed, the joint is established and the preload in bolt is decreased. The analysisis carried out on axisymmetry model of joint in ANSYS Workbench 15, a finite element method is implemented in that software. The evaluation of the preload lost is made for a used range of ratio of clamped length to a nominal diameter of bolt. Geometry and material assumptions are defined. Before preloading of bolts to a desired value the process of stabilization preloading must be done otherwise outlines of the analysis are not applicable. On the base of the outlines of the analysis, the method for analytical computing of the desired pretension is done. The method involves the preload lost, which occurs due to establishment of the joint. The strength assesment of the hydraulic tensioner for bolts M72x4 is done. A 3D model of the tensioner with one plane of symmetry was used. Strength criteria for maximum allowed linear-elastic stress are in accordance with ČSN EN 13 445-3.
|
|
| |
|
|
Computational analysis of a car axle arm opening
Procházka, Vojtěch ; Kubík, Petr (referee) ; Petruška, Jindřich (advisor)
This thesis is focused on behavior of control arm opening with bushing pressed in. The tested component is a part of control arm of a car. The parts were tested in tensile and compressive strength. Real experiments were measured by optical system Aramis during the testing to determine deformations of the part. These tests are also modeled by a finite element method using an Abaqus software. In GOM Correlate software is created full-field comparison of deformation results from Aramis and FEA. Based on this comparison computational model is calibrated. Sensitivity analysis is performed at the end of the thesis.
|
|
|
Stress-strain analysis of a chosen fire extinguisher
Češek, Jakub ; Petruška, Jindřich (referee) ; Novák, Kamil (advisor)
Bachelor’s thesis deals with stress-strain analysis of chosen extinguisher. Within this thesis, different types of closures are summarized and their influence in stress state is thoroughly analyzed. The stress-strain analysis is solved by using momentum shell theory as well as membrane shell theory. At the end of this thesis numerical solutions by using Finite Elements Method (FEM) is performed in Ansys software. All results are compared in conclusion of the thesis.
|
|
|
Computational simulation of leveling of pipes
Peter, Ondřej ; Šebek, František (referee) ; Petruška, Jindřich (advisor)
The master thesis deals with the computational simulation of cross-roll leveling of tubes with various degrees of thickness. Based on the Lagrange approach, a several FEM models of curved tube were developed and subsequently solved in ANSYS commercial software. Furthermore, a several models of curved tube were solved by algorithm based on the Euler approach created at UMTMB FME BUT. Based on the comparison of output parameters from both algorithms it was found that the output parameters are comparable to the d/D ratio (inner/outer diameter of the tube) = 0.43.
|
|
|
ANALYSIS OF IMPACT OF EXPERIMENT REALISATION ON MECHANICAL CHARACTERISTICS OF BIOMATERIALS
Slažanský, Martin ; Petruška, Jindřich (referee) ; Horný,, Lukáš (referee) ; Burša, Jiří (advisor)
Dizertační práce se zabývá věrohodností mechanického testování měkkých biologických tkání a predikčními schopnostmi různých modelů materiálů. Obě oblasti byly zkoumány užitím metody konečných prvků. První část práce je věnována úvodu do problému a popisu měkkých biologických tkání, které s problémem souvisí, a rešerši nynějšího způsobu jejich mechanického testování. Druhá část práce se zabývá hledáním optimálního nastavení experimentálního zařízení za použití počítačového modelování pomocí virtuální simulace mechanických testů. Výsledky analýzy potvrdily, že dvě úzké svorky po délce hrany, stejně jako běžně používané háčky, jsou použitelné pro dvouosé tahové zkoušky různých měkkých tkání za použití čtvercového vzorku. Použití svorek je proto časově úsporná, jednoduchá a spolehlivá alternativa, která není podřadná použití háčků. V práci byla rovněž provedena analýza, jejímž výsledkem jsou doporučení ohledně typu, počtu a velikosti uchycení pro různě velké vzorky. Třetí část práce zkoumá predikční schopnosti modelů materiálů měkkých tkání a závislosti těchto schopností. Lze shrnout, že výsledné mechanické chování proloženého modelu materiálu závisí na počátečních parametrech a že neexistují „ideální“ počáteční parametry při prokládání experimentálních dat. Navzdory absenci „ideálních“ počátečních parametrů je navržen v rámci možností nejefektivnější způsob aproximace experimentálních dat z mnoha jejich souborů. Dále je možné shrnout, že omezení hodnot parametrů modelu při prokládání experimentálních dat ústí v nepředvídatelný vliv na kvalitu aproximace. V závěrečné části práce byl analyzován předpoklad afinní a neafinní deformace modelů materiálů za účelem vysvětlení velkých rozporů mezi výsledky strukturně založených modelů a výsledky dvouosých testů při různých testovacích protokolech. Ačkoli byly zjištěny určité rozdíly mezi výsledky analyzovaných modelů, přece nebyly dostatečně významné, aby vysvětlily výše uvedené velké rozpory. V poslední části práce jsou zmíněny další možné oblasti výzkumu.
|
|
|
Stress analysis of rotor packet of synchronic generator
Bureš, Jiří ; Houfek, Lubomír (referee) ; Petruška, Jindřich (advisor)
This diploma thesis deals with distribution stress and strain of sheets metal of rotor packet and in critical locations of supporting bars of synchronous generator. These variants are calculated and one another comparison of analytic calculation results, numeric calculation of 2D model and numeric calculation of 3D model in three vriants ( with bars of rectangle section, circular section, with upper radius). The calculation include influence of thermal expansion, centrifugal force, interference of the packet on the shaft and prestress in the axial direction of bolt. To creation of geometric model and numerical calculation is used program ANSYS 11.
|
|
|
Shape optimization of new circumferential steam turbine blade attachment type
Mívalt, Tomáš ; Petruška, Jindřich (referee) ; Polzer, Stanislav (advisor)
This thesis describes selection and shows calibration of material model, capable of describing cyclic softening of material. Stress-strain FEM analysis of circumferential blade attachment for last section of rotor blades of steam turbine is performed, expected lifetime of existing attachment is evaluated. Multi-parameter optimization of new-shape attachment was done, resulting in dimensions for new-shape attachment with longer lifetime. Improvements in strain amount in comparison with existing attachment were evaluated and possible RPM increase of turbine with new attachment type was calculated.
|
guest ::
RSS feed.