|
|
Hydride generation of tellurium for atomic absorption spectrometry
Bufková, Kateřina ; Musil, Stanislav (advisor) ; Matoušek, Tomáš (referee)
This master's thesis deals with optimization of conditions of chemical hydride generation of tellurium and conditions of its atomization, specifically in three types of atomizers - in a diffusion flame (DF), in a heated multiple microflame quartz tube atomizer (MMQTA) and in a dielectric barrier discharge (DBD) atomizer. Tellurium hydride was generated in a flow injection arrangement and a high-resolution continuum source atomic absorption spectrometer was used for detection. As hydride generation can be only done from tetravalent species of tellurium, at first a simple procedure of pre-reduction of hexavalent species of tellurium by heating a standard in hydrochloric acid at 6 mol dm-3 was verified. Further, conditions of chemical generation were optimized with a goal to achieve as high generation efficiency as possible, namely, concentration of hydrochloric acid and sodium tetrahydroborate, volume of the reaction coil and a flow rate of carrier gas. Subsequently, conditions of atomization of tellurium hydride were examined with chosen optimal generation conditions. In the case of DF, it was an amount of hydrogen in the flame, a total flow rate of gases and observation height. In the case of MMQTA, temperature of the atomizer, a flow rate of carrier gas and a flow rate of air or oxygen needed for...
|
|
|
Hydride generation of bismuth for atomic absorption and fluorescence spectrometry.
Kolrosová, Marta ; Musil, Stanislav (advisor) ; Nováková, Eliška (referee)
This master's thesis deals with the optimization of conditions of chemical hydride generation (HG) of bismuth, its atomization and detection by atomic absorption spectrometry (AAS) and atomic fluorescence spectrometry (AFS). Two types of atomizers were used for atomization of volatile species, a miniature diffusion flame for AAS as well as for AFS and a flame-in-gas-shield atomizer for AFS. At first, the parameters of HG in a flow injection mode were optimized - the concentration of hydrochloric acid, the concentration of sodium borohydride and the volume of the reaction coil. Subsequently, the atomization conditions were optimized using both atomizers. The parameters optimized were hydrogen fraction, total gas flow rate and observation height. Due to the more complicated construction of the FIGS atomizer, more parameters were studied, such as the oxygen flow rate through the capillary and the flow rate of shielding argon required for shielding the free atoms. A special part of the thesis dealt with the optimization of the optical path of the atomic fluorescence spectrometer, the selection of an interference filter and the optimization of a power supply of an electrodeless discharge lamp. It was found that under optimum conditions of generation, atomization and detection excellent detection limits...
|
|
|
Photochemical generation of volatile species of cobalt for analytical atomic spectrometry
Vyhnanovský, Jaromír ; Musil, Stanislav (advisor) ; Nováková, Eliška (referee)
This master's thesis deals with the optimization of conditions for photochemical generation of volatile species of cobalt. Volatile species of cobalt were generated in a flow injection system using a high-efficiency flow through UV generator from formic acid based medium. For detection a high-resolution continuum source atomic absorption spectrometer was used. The volatile species were atomized using a diffusion flame atomizer because of its high robustness. First the optimizations of the parameters affecting the atomization in the diffusion flame and the parameters affecting the transport of the volatile species from the UV generator into the atomizer were carried out (flow rates and composition of the gases, type of a separator, observation height). After that, the optimization of the parameters of the photochemical generation itself was carried out. These were the composition of a reaction medium (concentration of formic acid and formate, type of formate salt) and irradiation time. The possibility of generation of the volatile species from acetic acid based medium was also investigated, but no signal was observed. At chosen optimal conditions of generation the influence of potential interferents was examined, mainly from inorganic acids (HNO3 and HCl) and some transition metals (Fe, Cu and Ni)....
|
|
| |
|
| |
|
| |
|
|
Determination of Inorganic Arsenic in Samples of Marine Origin
Marschner, Karel ; Matoušek, Tomáš ; Dědina, Jiří ; Musil, Stanislav
A fast screening method for determination of inorganic arsenic in marine samples was developed. This method is based on selective\nhydride generationanddetectionby inductively coupled plasmamass spectrometry. Using a high concentration of hydrochloric acid\ntogether with hydrogen peroxide for hydride generation leads to selective conversion of inorganic arsenic species into arsane. The\naccuracy of this method was verified by comparative analyse by high performance liquid chromatography coupled with hydride generationandatomic\nfluorescence detection.
|
|
|
Photochemical generation of volatile species of nickel for analytical atomic spectrometry methods
Šoukal, Jakub ; Musil, Stanislav (advisor) ; Kratzer, Jan (referee)
This thesis deals with optimization of conditions of photochemical generation of volatile species of nickel for atomic absorption spectrometry. The volatile species of nickel were generated in the flow arrangement, when sample was injected to a stream of a reaction medium. Either formic acid was used as the reaction medium or formic acid with the addition of formate anions. Two types of a generator were tested, a generator with a PTFE tube wrapped around a mercury UV lamp and a high efficiency generator with an inside channel. At the same time, two types of a gas-liquid separator were tested. Diffusion flame was used as an atomizer due to its high robustness. Quartz atomizer didn't provide higher sensitivity and measurements had worse repeatability. All the parameters affecting atomization in the diffusion flame were optimized (flow rates and composition of gases, observation height). In the next section, conditions of generation (irradiation time, HCOOH concentration, addition of formate anions) were optimized. Interferences of inorganic acids in photochemical generation were investigated as well. It was found out that the generator with the inside channel provided slightly higher sensitivity and thus generation efficiency than the generator with the PTFE tube wrapped around. Transmission of...
|
|
|
Speciation analysis of inorganic arsenic in seafood material
Pokorná, Nikola ; Matoušek, Tomáš (advisor) ; Musil, Stanislav (referee)
This thesis was focused on extraction of individual arsenic species from reference materials of fish protein DORM-3 and DORM-4. Extracts were then analyzed by a hydride generation method with detection by inductively coupled plasma mass spectrometry. Materials were extracted in two ways - in a microwave device and in a heating block. It was found that extraction with 2% nitric acid is not efficient. Extraction performed in 2% nitric acid with addition of hydrogen peroxide at various concentrations increased the extraction yield, but it caused conversion of arsenic species. This conversion would mean the overestimation of inorganic arsenic content.
|
|
|
Generation of volatile species of palladium for atomic absorption spectrometry
Vyhnanovský, Jaromír ; Musil, Stanislav (advisor) ; Matoušek, Tomáš (referee)
This thesis deals with optimization of the conditions for chemical generation of volatile species of palladium in combination with atomic absorption spectrometry. The volatile species of palladium were generated in a flow injection system by the reaction of an acidified sample with the solution of sodium borohydride in the presence of reaction modifiers. A diffusion flame atomizer was used due to its high robustness. In the first part of this thesis the optimization of parameters affecting the atomization in the diffusion flame was carried out (flow rates and composition of gases, observation height). In the second part, concentrations of individual reagents used (nitric acid, sodium borohydride, Triton X-100, Antifoam B, sodium diethyldithiocarbamate) were optimized. The positive effect of the reaction modifiers was demonstrated, especially that of sodium diethyldithiocarbamate, which lead to a tenfold increase in the sensitivity. The limits of detection and limits of quantification for the wavelength 244,8 nm were 0,25 mg dm-3 and 0,67 mg dm-3, respectively. The repeatability for this method for the concentration 5 mg dm-3 was 2,8 %. Key words: palladium, chemical generation of volatile species, atomic absorption spectrometry
|
guest ::
RSS feed.