|
|
Production technology of plastic base device with terminal
Horník, Tomáš ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
Master’s thesis deals with selection of a proper technology for manufacturing of chosen plastic part. The beginning of thesis contains part survey. Plastic injection was chosen as the most suitable manufacturing technology. Required theoretical knowledge for plastic injection mould designing were extracted in the recherche. Individual chapters deals with plastics, their manufacturing and plastic injection technology with all required knowledge about this technology, machines and moulds. Designing chapter contains every required calculation for mould design and all individual sections of mould design and injection machine selection. Injection simulations and their evaluations are part of this thesis aswell. Assembly and forms drawings as well as other documents used during thesis processing are included in the attachments.
|
|
|
Production technology of plastic threaded adapters
Turek, Tomáš ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
The Master thesis deals with the possible production of the plastic unit with thread. As the most suitable material was chosen the polyformaldehyde (POM), its production label is Delrin 500P NC010 by Du Pont. The thesis consists of a part with the information about the technology of injection molding of plastics and a part where processing parameters for the production of the plastic unit are designed. Part of the solution was to create an assembly design of injection mold. Since the plastic unit with thread is very specificly shaped the form is handled as a slide mold. The mold is pieced together from normalized parts by the Hasco and DME company. The serie of 100 000 pieces would be delivered in 5 months. Because of the cost savings a solution of the cold-runner system was suggested. A suitable injection molding machine was chosen from the calculated values from Arburgfroms – Type 370s Allrounder 500-170.At the end of the thesis costs were evalueted for acquire per one piece of adapter.
|
|
|
Production technology flexible plastic clip
Mikulenka, Martin ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
Currently, the plastics industry has a wide range of applications due to the possibility of a fully automated process or through increased production efficiencies. The reason for this choice of the thesis was to understand the whole issue of plastic injection molding process. The specified component is used to atach the sail, which serves to protect workers in the welding sector. A specified number of the series is 350 000. The work includes a theoretical problem of injection molding process, selection of technology, material selection and design of mold. An integral part of every design mold is a simulation of injection, which is also included. In conclusion of thesis is the calculation of the various stages of production and operation of the injection mold.
|
|
| |
|
|
Production technology of plastic unit base
Vyškovský, Stanislav ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
Thermoplastic injection technology is widely used in all sectors of consumer electronics and automotive industry. The biggest advantage of this manufacturing technology is a high degree of automatization and good reproducibility of the manufacturing process. Another advantage is the possibility of recycling of the gating scrap and defective products. The main task of this work is to calculate the necessary parameters for the injection process, which takes place at the designed injection form. Next part is technical design which includes choice of standard parts of injection mold and idividual semi-finished parts for mold. Thesis continues with selecting the type of injection press based on calculated parameters of the injection process. Thesis is finished by technical-economic evaluation.
|
|
|
Production technology of plastic porter for ammunition
Hejl, Dušan ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
Dissertation deals with solution of production of set component „plastic porter for ammunition“. Component is made from high-density polyethylene with business marking LITEN ML 77, suggested series of 3 000 000 pieces. On the basis of literary study of plastics injection problems and necessary calculations, there was proposed injection form. This form is solved by means of normalised components from company Meusburger. There was chosen injection machine from company Arburg Allrounger 370 S 700 – 170.
|
|
|
Design of manufacturing technology for plastic hung
Popelka, Jan ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
The aim of my graduation theses is to work up the literature search of polymer processing. To give a short summary of their structure, characteristic and fabrication technique. Then to make a structural design of injection mold for producing the scheduled aim and motivate this design with requisite calculation for construction of the tool, a choice of injection machine and rundown of injection cycle. At the end of my work is this aim economically reviewed and compared with alternative form of structural design.
|
|
|
Production technology of plastic switch frame
Seidlman, František ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This Diploma contains theme of injection of plastics. The theoretical section is focused on polymeric materials, their dividing and characteristics. From technologies for processing plastic is chosen injection of plastic, suitable for production technology of plastic switch frame. After that follows design of injection mould including calculation and designing drawing underlaid technical economic evaluation.
|
|
|
Design of plastic cogvheel processing
Šváb, Petr ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
The publication contains manufacturing technology of injection cog-wheel, manufacturing plastic material specification and technical drawing documentation including injection shapes. Based on technical data of injecting machine the proper manufacturing technology is suggested. Basic evaluation of costs required to manufacture the whole series of injection cog-wheels is also included.
|
|
|
Engineering plastics for specific applications
Vrátný, Martin ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This bachelor’s thesis is focused on heat resistance and chemical resistance of plastics. The first part deals with properties and usage of selected plastics. The second part includes description of heat resistance and chemical resistance. Selected plastics are compared in table by their resistance. In conclusion the plastics are compared by detected data and suitability of plastics in environment with higher temperatures and aggresive chemical impacts.
|
guest ::
