|
|
Advanced carbon structures as a material for Na-ion batteries
Bečan, Jan ; Čech, Ondřej (referee) ; Kazda, Tomáš (advisor)
This diploma thesis deals with the description of individual types of batteries. The first part is focused to primary and secondary batteries, materials for their positive and negative electrodes with a focus on lithium-ion batteries and their changes over time. The next section focuses on a more detailed description of sodium-ion batteries, used electrode materials and to their problems. Practical part is focesed to preparing of electrode materials and to completing of measuring electrochemical cell and to discribing of measuring methodes and to evaluation of measured data.
|
|
| |
|
|
Study of materials for the Li-ion batteries by electron microscopy
Hujňák, Jan ; Čudek, Pavel (referee) ; Kazda, Tomáš (advisor)
This work deals with problems of lithium-ion batteries. In the theoretical part are described electrochemical sources in general and their division. The main representatives of individual types of electrochemical sources are described in more detail. In the next part the thesis focuses specifically on lithium-ion accumulators, their history, electrochemical reactions taking place inside and materials of individual parts of which the accumulator consists. Next part focuses on electron microscopy and its division into scanning and transmission. Basic parts and the principle of operation are described. The practical part is focused on creating a small cell for examination under an electron microscope.
|
|
| |
|
|
Effect of compaction pressure to the electrochemical properties of the electrodes for Li-S accumulators
Jaššo, Kamil ; Tichý, Jiří (referee) ; Kazda, Tomáš (advisor)
The purpose of this diploma thesis is to describe the impact of compaction pressure on the electrochemical parameters of lithium-sulfur batteries. Theoretical part of this thesis contains briefly described terminology and general issues of batteries and their division. Every kind of battery is provided with a closer description of a specific battery type. A separate chapter is dedicated to lithium cells, mainly lithium-ion batteries. Considering various composition of lithium-ion batteries, this chapter deeply analyzes mostly used active materials of electrodes, used electrolytes and separators. Considering that the electrochemical principle of Li-S and Li-O batteries is different to Li-ion batteries, these accumulators of new generation are included in individual subhead. In the experimental part of this thesis are described methods used to measure electrochemical parameters of Li-S batteries. Next chapter contains description of preparing individual electrodes and their composition. Rest of the experimental part of my thesis is dedicated to the description of individual experiments and achieved results.
|
|
|
Control of the 3D printer using Raspberry Pi
Lokajíček, Lukáš ; Kazda, Tomáš (referee) ; Vyroubal, Petr (advisor)
The bachelor project deals with the possibility of solution to control 3D printer type RepRap using single-board computer Raspberry Pi. The theoretical part of semester project contains 3D printing theory focused on 3D printer built at the Department of Electrical and Electronic Technology. The last part of bachelor project is devoted to practical design of compact interface that assure communication between 3D printer and controlling software using Raspberry Pi.
|
|
|
Study of life cycle of the accumulators
Babieska, Lukáš ; Binar, Tomáš (referee) ; Kazda, Tomáš (advisor)
This bachelor work deals with monitoring the life cycle of a lithium-ion battery. The theoretical part describes the history and development of electrochemical cells. Lithium-ion batteries are a separate chapter. There are described their principles, the most used materials for the production of negative and positive electrodes, loading characteristics and the influence of temperature. In the practical part, the influence of temperature on changes of internal impedance, cell capacity and efficiency of energy supply during the battery life cycle is monitored.
|
|
|
Effect of the pressure used in the manufacture of the electrodes on their final properties
Foltová, Anežka ; Tichý, Jiří (referee) ; Kazda, Tomáš (advisor)
The aim of this work is to describe final properties of the electrodes based on the amount of pressure used during its production. In the theoretical part of this work, secondary electrochemical accumulators are described, with the focus on Li-ion accumulators. In the main part of this work, the production of Li-ion accumulators, with usage of different pressures during its production is described. In the final part of this work, the examination of these created cells for the classification of the optimal production pressure is described.
|
|
|
Expanded and Flake Natural Graphite as Negative Electrode Material in Lithium-ion Cell
Paulovics, Petr ; Kazda, Tomáš (referee) ; Libich, Jiří (advisor)
This diploma thesis deals with an issue of lithium-ion batteries, primarily with negative (anode) electrode materials. Natural graphite in two forms, namely flake and expanded graphite, is used in the thesis as active electrode material. It is concerned with study of their capacity and output characteristics depending on the pressing pressure and discharging current. The first part of thesis consists of theory and describes basic principles and the composition of lithium-ion batteries. Materials, their characteristics used in production and theoretical description of measurement techniques are presented then. The second part of the thesis is focused on production, assembling and measurement of the characteristics of the produced electrodes. The aim of the thesis is finding the effects of changes of pressing pressure on the capacity, stability during cycling and stability at higher loads.
|
|
|
Optimalisation of coposite materials for civil engineering
Kazda, Tomáš ; Chladil, Ladislav (referee) ; Novák, Vítězslav (advisor)
This work is focused on optimalisation of coposite materials for civil engineering. In the theoretical part of the project is introduction of the composite materials and materials which are used for their production. There are also concerned their properties and possible application areas. In conclusion of theoretical part this project is a summary of the possible use of composite materials. The practical part compares the characteristics of the different types of composites made in terms of conductivity and the rate of corrosion.
|
guest ::
