|
|
Design of manufacturing technology for car carpet
Kavan, David ; Žák, Ladislav (referee) ; Kandus, Bohumil (advisor)
The main goal of this bachelor thesis is design of a manufacturing technology for car carpet made from a thermoplastic elastomer. Car carpet will be produced by injection molding with a hot runner system in a series of 42 000 units per year. At first there is an analysis of the current technologies, enclosed with a summary of reasons for the changes in manufacturing technology. Then following is a general review of the literature relating to plastic materials and injection molding technology. In the practical part a suitable material is chosen, injection molding machine is chosen according to calculated technological parameters and a conceptual design of an injection mold for car carpet is executed. The last part is a technical and economical evaluation comparing the current production technology with the newly proposed technology.
|
|
|
Design of manufacturing technology for door elastomer grommet
Kavan, David ; Stehlík, Ing. Jaroslav (referee) ; Kandus, Bohumil (advisor)
The goal of this project is design of manufacturing technology for door elastomer grommet in a series of 400 000 units per year. As a proposed solution of manufacturing technology has been chosen multicomponent injection moulding. Appropriate thermoplastic elastomer and polyamide was chosen based on the knowledge gained in theoretical study of materials and technologies elaborated in the second part of the project. Moreover, the shape of the door grommnet was redesigned in accordance with the chosen technology. Working machine was chosen from manufacturer Arburg, model Allrounder 630S in a two-shot design, complemented by the index unit. A cost of production of one piece of the door grommet was determined in an economic evaluation. This cost was compared with current cost of production and new technology reducing manufacturing costs of one series by 25%.
|
|
|
Collective bargaining
Kavan, David ; Pichrt, Jan (referee) ; Tröster, Petr (referee)
Rigorózní práce Kolektivní vyjednávání Mgr. David Kavan Abstract The thesis deals with the collective bargaining as it is nowadays (the thesis reflects the status as of September 1, 2014) understood and regulated by the Czech law. This understanding and regulation has been compared to the understanding of the collective bargaining under the documents of the public international law. The thesis focuses on the legal regulation of the collective bargaining and of other legal issues that are of importance for the collective bargaining as they can be found in the Czech national law, in the public international law and in the sources of the European law. The author has been dealing with the persons and entities that are concerned by or involved in the collective bargaining and with the different levels the collective bargaining can take place at. He has been describing also the procedure of the collective bargaining and the proceedings that apply within its framework. The author has been concentrating on the collective agreement as well, as it is the typical and most important outcome of the collective bargaining. At the end the thesis focuses on the situation where the parties to the collective bargaining are not able to reach their consensus on the collective agreement and on the legal instruments they can use...
|
|
|
Design of manufacturing technology for door elastomer grommet
Kavan, David ; Stehlík, Ing. Jaroslav (referee) ; Kandus, Bohumil (advisor)
The goal of this project is design of manufacturing technology for door elastomer grommet in a series of 400 000 units per year. As a proposed solution of manufacturing technology has been chosen multicomponent injection moulding. Appropriate thermoplastic elastomer and polyamide was chosen based on the knowledge gained in theoretical study of materials and technologies elaborated in the second part of the project. Moreover, the shape of the door grommnet was redesigned in accordance with the chosen technology. Working machine was chosen from manufacturer Arburg, model Allrounder 630S in a two-shot design, complemented by the index unit. A cost of production of one piece of the door grommet was determined in an economic evaluation. This cost was compared with current cost of production and new technology reducing manufacturing costs of one series by 25%.
|
|
|
Design of manufacturing technology for car carpet
Kavan, David ; Žák, Ladislav (referee) ; Kandus, Bohumil (advisor)
The main goal of this bachelor thesis is design of a manufacturing technology for car carpet made from a thermoplastic elastomer. Car carpet will be produced by injection molding with a hot runner system in a series of 42 000 units per year. At first there is an analysis of the current technologies, enclosed with a summary of reasons for the changes in manufacturing technology. Then following is a general review of the literature relating to plastic materials and injection molding technology. In the practical part a suitable material is chosen, injection molding machine is chosen according to calculated technological parameters and a conceptual design of an injection mold for car carpet is executed. The last part is a technical and economical evaluation comparing the current production technology with the newly proposed technology.
|
guest ::
RSS feed.