|
|
Family house with place of business
Zichová, Jana ; Jelínek, Petr (referee) ; Balíková, Jitka (advisor)
This work deals with a newly built detached house with a place of business – a hairdresser’s. The building is situated in the south-west part of the town of Pozořice in a distance of approximately 15 kilometres east of Brno. It is designed as an edifice on two floors, without a cellar and with a flat roof with single covering. On the ground floor the hairdresser’s and residential rooms for daily use are located while on the first floor there are places designed for relaxation with bedrooms and rooms for children. The house is planned for 2 adults and from 3 to 4 children.
|
|
|
Mixed-use building
Mareček, Patrik ; Jelínková, Barbora (referee) ; Jelínek, Petr (advisor)
The aim of my diploma thesis was a project of a new mixed-use building in the land register of Brno. The object is a 5 storey building that is with basement. In the basement is garage for 13 cars. The first floor will be located several shops. Between the second and the fourth floor will be dwelling units. It is covered by flat roof with Attica. I designed the project with emphasis on disposal orientation according to the cardinal points and constructed arrangements of the building. During the process I tried to use modern methods, common material and I tried to separate space for living and space for public.
|
|
|
STUDY OF BIOGENOUS BINDERS
Cupák, Petr ; Jelínek, Petr (referee) ; Neudert, Alois (referee) ; Rusín, Karel (advisor)
oundry production, which forms an integral part of the engineering industry, is a source of waste with a negative impact on the working and living environment. The pressure on greening the production in all production branches of industry does not dodge the foundry industry and technical engineers seek out possibilities of decreasing the negative impact of the production of casting on the environment. An important source of environmentally dangerous waste in foundry operation is the use of organic compounds during the preparation of shaping and core mixtures. Their substitution with materials that would ensure similar technological features of the shaping and core mixtures as the organic materials used hitherto and at the same time decrease the amount of solid, liquid and gaseous ecologically undesirable compounds used in or arising during the preparation and use of shaping and core mixtures, would be significant for decreasing the ecological burden connected to casting production. A promising group of materials usable as components of shaping and core mixtures are the biopolymer materials which can substitute the organic connective systems used in the production of foundry cores by the means of the so-called hot processes – Hot-Box and Warm-Box. This work focuses on the exploration of the technological and ecological features of several biopolymer materials available on the domestic market which have the potential to become a full alternative of the binders used so far on the basis of urea-formaldehyde, melamine-formaldehyde, phenol-formaldehyde and furan resins.
|
|
|
Mixed-use building
Paštěka, Jakub ; Krupica, Roman (referee) ; Jelínek, Petr (advisor)
Diploma thesis is in form of building documentation for construction according to valid regulations. Designed mixed-use building is located in Zlín on plots no. 2865/3, 2865/22, 2865/23 and 2866. Building has shape of letter L, it has three above-ground floors and undergroud garage. Building has three separate parts – part with flats of sizes 3+kk and 4+kk, training centre and community centre. Each part has different number of above-ground floors. New building is detached house with maximum height 10,48 m. Object is constructed with ceramics blocks. It has ventilated facade and flat green roof. Ceiling is designed as cast-in-place reinforced slab. Material for foundations is waterproof concrete. Diploma thesis also includes assessment of thermal technology, acoustic and fire safety.
|
|
|
Energy efficient house
Kmec, Peter ; Elešová, Klára (referee) ; Jelínek, Petr (advisor)
The purpose of my Bachelor work is the processing of the project documentation for implementation of a detached house on a land in the city of Brno, a borough of Líšeň. The land is a slopely towards the Southwest. The building is designed as a two-storey with a partial basement. 1.NP is handled as a social part and 2.NP as a part of relaxation. In the basement is a utility room and warehouse. Base construction is the strip foundation from the plain concrete. Vertical supporting constructures are from the aerated concrete floors blocks Ytong insulated with a thermal insulation Isover. Underground floor is from permanent formwork DITON which is drenched by a plain concrete and steel reinforcement. Horizontal supporting constructures are dealt as a ceramic Porotherm. The roof is a warm flat roof.
|
|
|
Apartment building
Jokl, Lukáš ; Struhala, Karel (referee) ; Jelínek, Petr (advisor)
The subject of the bachelor's thesis is the new construction of an apartment building in Brno-Bohunice. The apartment building has 4 floors. The building does not have a basement. On the ground floor there is an apartment for the disabled, a cellar for each apartment and technical facilities for the operation of the building. There are a total of 10 residential units in the apartment building and the projected capacity is 20 people. The building is made of brick blocks. The ceiling structure is designed as a semi-assembled brick inserts and beams, the flat roof is vegetation. The apartment building is designed as a house with almost zero energy consumption.
|
|
|
Mountain hotel
Moučka, Miroslav ; Struhala, Karel (referee) ; Jelínek, Petr (advisor)
The aim of this master’s project is to develop project documentation of a new-built mountain hotel in Ostružná. This hotel is near the ski area Ramzová in Jeseníky. Foundation of my building is from ground reinforced concrete slab. My building is supported by clay block load-bearing walls and clay non-load bearing walls. Exterior building envelope is designed as an aluminum shingle ventilated facade. The slabs are from reinforced concrete. The roofs of this designed building are two, first is pitched roof with insulation over rafters and second is intensive green warm flat roof. This project contains HVAC concept, photovoltaic panel concept, heating concept in technical equipment of building part. The third part of my master’s project is energy assessment for the building.
|
|
|
Sports centre Všechovice
Rolinc, Martin ; Jelínek, Petr (referee) ; Müller, Jan (advisor)
This diploma thesis deals with the design of a new sports center, which is situated in the cadastral unit of the village Všechovice 787086 (district of Přerov), on the plot number 163/1. The land is a planar character. It is a three floor building with two above-ground and partial basement. The construction is a square ground plan. The building is based on the strips foundation and foundation pads. The wall structural system consists of sandstone km beta sendwix blocks. The frame structural system is made up of reinforced concrete columns and beams, with the brickwork made of ytong classics. The external walls are insulated with a mineral wool insulation etics contact system. Ceiling structures are made of reinforced concrete slabs and wooden ceiling beams. The building is roofed with 3% flat roofs and part of the multipurpose hall is roofed with a curved, rolled roof. The diploma thesis is performed as a design documentation for the building process.
|
|
|
Multi-purpose Building, Jana Babaka, Brno
Kolářová, Eva ; Jelínek, Petr (referee) ; Kolář, Radim (advisor)
Project's goal is to test the large buildings' design options in regards to permanently sustainable construction. The author's aim is to design energy efficient multipurpose building, with minimal negative effects on environment. The positive impact on environment is visible on the preference of natural materials used in construction. External constructions of thermal conductivity coefficient at the level of passive standard are designed using objects of renewable energy. The location in Brno has been chosen for the proposed building, specifically the location known as brownfields. Lot is accessible from the street of Jan Babak, where public transport is available. The shape of the lot is in the form of incomplete oval with internal open atrium. The administrative part of the building takes half of the area with the rest of the area being used for other businesses, such as fitness centre and restaurant. Garages are proposed to be located underneath the main building, which is built on rigid structure. This rigid structure is a steel skeleton one with linked ceilings. The foundation of building is on stilt. The roof is of a flat type with variable slope, its structure and slope are of metal construction. Claddings are designed in the form of wooden structure filled with straw bales, the exterior is thermally insulated using fibreboard thermal insulation. Inner tract facade is proposed to be panelled with wooden planks. Photovoltaic panels will be placed both from the south and southeast of the outer oval. The rest of the facade will be panelled with grate for creepers. Only environment-friendly sources of energy are considered for the proposed building. Heating and cooling is based on the heat pump air-water system; using the rainwater as an example of renewing natural energy. The surroundings of the building are designed as meadows for of infiltration of rainwater. The proposed building has been assessed in terms of environmental sustainabilit
|
|
|
Energy efficient house
Král, Vítězslav ; Struhala, Karel (referee) ; Jelínek, Petr (advisor)
This bachelor thesis solves the design of Energy efficient house in Brno Kociánka. The building is approximately the shape of a square with a protrusion. The building has two above-ground floors and one underground floor. There are 3 balconies and the house is roofed with two types of a roof structure. Above the outer parts there is a double-shelled roof and in the central part a one-shell with one rooflight. One housing unit and a garage are designed in the building.
|
guest ::
RSS feed.