|
|
Family house
Šefl, Jan ; Holešovská, Anna (referee) ; Sobotka, Jindřich (advisor)
Topic of the thesis was to make architectural drawings of two floor building in Zlín, which is placed on planar terrain. Object is supposed to serve four member family for living. Main entrance to object is fluently connected to Zálešná VIII street. The house is made of two main volumes. The first one is created from two blocks into the L-shape. The second volume is block recessed into the first one. Main rooms for living are situated on a South of the building. Vertical structure which supports roof slabs are made of Ytong blocks. Roof slabs above first floor and a staircase is made of monolitic concrete. Roof above the second floor is composed of Spiroll panels. Drawings were created in Archicad software. Vizualizations were created using SketchUp, Artlantis and Photoshop softwares.
|
|
|
Family house with establishment
Šatrán, Jiří ; Holešovská, Anna (referee) ; Šuhajdová, Eva (advisor)
The intention of this bachelor thesis is a project documentation of a family house with a business premises, in this case we are talking about office. Building is situated in the Moravian-Silesian regionm specifically in the village Starojická Lhota. It is a two floors new building with a terrace, designed for a family of four. The house is plastered with a light yellow tint. The windows and doors are wooden. Vertical constructions are made of polished ceramic bricks which are based on concrete strip footings. Horizontal structures are constructed from ceiling panels Miako made by POROTHERM company. Roofing of the main section is solved by gabled roof. Under roof is situated attic. Establishment and garage are roofed by gable roof too. The roof cladding consists of ceramic tiles TONDACH Samba 11.
|
|
|
Family house
Šefl, Jan ; Holešovská, Anna (referee) ; Sobotka, Jindřich (advisor)
Topic of the thesis was to make architectural drawings of two floor building in Zlín, which is placed on planar terrain. Object is supposed to serve four member family for living. Main entrance to object is fluently connected to Zálešná VIII street. The house is made of two main volumes. The first one is created from two blocks into the L-shape. The second volume is block recessed into the first one. Main rooms for living are situated on a South of the building. Vertical structure which supports roof slabs are made of Ytong blocks. Roof slabs above first floor and a staircase is made of monolitic concrete. Roof above the second floor is composed of Spiroll panels. Drawings were created in Archicad software. Vizualizations were created using SketchUp, Artlantis and Photoshop softwares.
|
|
|
Family house in existing buildings
Svoboda, Adam ; Holešovská, Anna (referee) ; Šuhajdová, Eva (advisor)
Bachelor thesis is focused on design and project documentation of a family house in an urban area cadastral area Kluky, Hradec Kralove, of plot number 328/66. The resulting proposal arises from the surrounding buildings and the land use plan. The building has one floor with attic and attached garage, a gabled roof and no basement.
|
|
|
Family house with an establishment
Herceg, Jaroslav ; Holešovská, Anna (referee) ; Sobotka, Jindřich (advisor)
Bachelor´s thesis deals with a project of a family house and geodetic office within development area of family houses in Prievaly cadastral area. Structure is designed as three-storey house with a semibasement, composed by the basement floor and two storeys above the ground. Structure is suited in a midly sloping terrain. Main entrance is positioned in the front part which is oriented towards north. Entrance to the office is positioned from western side. Family house is designed for 4-6 member family, garage is intended for one car only. In the basement part is geodetic office for 3-4 employes. In the 1st floor is the social part of the house and in the 2nd floor is a quiet part of the house. Structure is based on footing from plain concrete. The vertical loadbearing structures are made of Porotherm clay brick while the floor structures are made of reinforced concrete. Saddle roof of the building with a slope of 32°.
|
|
|
Resort "RELAX"
Remsová, Pavla ; Holešovská, Anna (referee) ; Sobotka, Jindřich (advisor)
This thesis describes the design of the recreation grounds, which consists of a main building of a restaurant and six holiday cottages. The plot is also a tennis court. The restaurant is a two-storey building without a basement. All the cottages are single storey and cellar. Restaurants device is designed for a maximum capacity of 70 people. Total capacity of the entire complex is 30 beds. The restaurant is focused on the northern part of the land and buildings of six holiday cottages on the south side. Restaurant is designed as a brick structure with a contact insulating system. Partitions are designed as plasterboard. The ceiling is designed as a monolithic reinforced concrete slab. Part of the roof is designed as a pitch roof truss recognized. The largest area of flat roof occupies roof vegetation. Part of the restaurant is walk-terrace. The cottages are designed masonry with contact insulating system. Partitions are designed as plasterboard. Roofs are designed as counter recognized truss. The thesis contains drawings and technical documentation and it is composed as an implementation project.
|
|
|
5-Minutes Neighbourhood
Holešovská, Anna ; Šimeček, Pavel (referee) ; Menšíková, Naděžda (advisor)
The aim of this Master thesis was to create urban structure in the particular resident area of Brno that would revitalizing and activating that particular and at the same time keep on the original estate. The main target is also to design various facilities that would enhance current environment and provide new opportunities.
|
|
|
Detached house with an establishment
Pálka, Tomáš ; Holešovská, Anna (referee) ; Utíkalová, Ivana (advisor)
The subject of this thesis is newly built maisonette detached house with hairdresser´s in Zaječí. The shape and height position of the house is adapted to vertical alignment of the ground.The house is designed for 4 family members. The main entrance is in the first floor from the street of Vinařská. The house is connected garage for one car.The main residential rooms are situated to the southwest side of the house. Vertical constructions are made of ceramic bricks. All ceiling construction is monolithic. House has got a mono-pitched roof. The project was processed by a computer program AutoCAD.
|
|
|
Detached house with design office
Hrbáček, Adam ; Holešovská, Anna (referee) ; Utíkalová, Ivana (advisor)
Topic of my bachelor thesis is creating design documentation on level of detailed design, Detached house with design office. Project contains engineering reports, drawings, thermal assessment, fire safety assessment, simplified foundation design and design of staircase. Designed house has partial basement with one above ground floor. Structural systém is mansory walls,based on strip foundations, staircase is cast-in-place reinforced concrete, ceiling is made of precast prestressed hollow core slabs, roof structure is made from timber truss beams on which is suspended thermal insulated, plasterboard ceiling. Project was designed by computer software ArchiCAD 16 and vizualization done by program Artlantis 4.
|
|
|
Detached house with design office
Horňáková, Veronika ; Holešovská, Anna (referee) ; Utíkalová, Ivana (advisor)
The topic of this bachelor thesis is a new family house with project office in Uherský Brod. Family house is located on flat land in a short distance from the city center. The building is two-floor. In the first floor is located entrance to the building, storeroom, utility room, living room, sbathroom, WC and project office with own entrance and WC. From the first floor is also entrance to the terrace and garden. In the second floor is situated bedroom with dressing room, two bedrooms, bathroom and WC. From one of the bedroom is possible to access to the balcony. The roof above the first floor is flat, the roof above second flat is mono-pitched roof. The building is made of structural masonry system Porotherm 30 P+D, insulation system EPS 100F, roof truss from bonded girder, roof covering foil Fatrafol. Garage is designed as a detached building roofed with a flat roof. Garage is made of the structural system Porotherm 30 P+D. Project Documentation is created in AutoCAD.
|
guest ::
