|
|
Special small induction motor
Trubák, Vojtěch ; Mach, Martin (referee) ; Hájek, Vítězslav (advisor)
This term paper is focused on theory and calculation of an induction motor with solid rotor. It is divided into six chapters, the first one being an introduction and the last being a conclusion. Second chapter is dedicated to magnetism. There is briefly description of a skin depth of a conductor and calculation method for impedance of a conductive solid. Third chapter is focused on theory of an induction machines, their construction, equivalent circuit and some of their properties. Fourth chapter is dedicated to calculation of an induction motor with solid rotor and its parameters. Fifth chapter is comparing results of calculation done in fourth chapter for an already existing motor with measured values.
|
|
|
Analysis and Innovation systems of Vehicle Lighting
Straka, Ondřej ; Mach, Martin (referee) ; Hájek, Vítězslav (advisor)
Subject semestral thesis is diagnosis primary objective luminosity plus elaboration background research primary objective plus modern waies lighting. Work includes indicative allocation light fitting, systems plus possibilities increasing safeness on roads by using modern systems facilitating movement and behind handicap. Are here also circumscribed systems facilitating visibility in night o'clock plus manners realization of all these systems.
|
|
|
Impact of core length on efficiency of a single phase induction machine
Binek, Martin ; Hájek, Vítězslav (referee) ; Mach, Martin (advisor)
This bachelor's thesis analyses the impact of core length on efficiency of a single phase induction machine with a run capacitor in the auxiliary winding. The whole thesis can be divided into two parts. The first part of the thesis includes general knowledge concerning single phase induction machines and technical base for its analytical calculation. The second part works with the actual technical documentation of a motor. This part includes creation of the motor model in RMxprt module, analytical calculation for verifying the motor properties and laboratory measurement, where the results are primarily compared to RMxprt simulation as well as to the analytical calculation, mainly from the efficiency perspective.
|
|
|
Problems revisions electric machine with a slip device, including an additional device
Ščepka, Ondrej ; Hájek, Vítězslav (referee) ; Veselka, František (advisor)
This Bachelor's thesis describes an issues of an revisions on electric engine equipped with brush. Electric engines with brushing are described in the first part. In the second one is focused on the introduction with necessary standards for performing of revisions of the electric equipment and on the clarification of terms used during the revisions of the electric equipment. The work continues with more detailed description of brushing contact in the electric engine and with the description of its parts. In the next part I have become more familiar with the electric engine that will be inspected. The final part of thesis contains sequence of measurements. I registered and handled recorded measured values mandatory for the issuing of revision report.
|
|
|
Proposal of electrical equipment for soaking and drying cores for making castings
Čermák, Jiří ; Hájek, Vítězslav (referee) ; Veselka, František (advisor)
This diploma thesis deals with proposal of electrical equipment for soaking and drying cores for making castings at foundry in a Great Britain. It brings look at system of technical norms ČSN and it compares it with british system of technical norms British standards. The second part of this thesis contains detailed proposal of this equipment, including specification of control system, specification of power supply cables and control cables and particular technological units. The whole project documentation is enclosed as an inseparable attachment of this diploma thesis.
|
|
|
Thermal properties of automotive light sources - Halogen sources
Hlubinka, David ; Hájek, Vítězslav (referee) ; Janda, Marcel (advisor)
The aim of master´s thesis is to get acquainted with the design and materials used in selected automotive light source – tungsten halogen lamp. Further, the thesis focused on the theory and appropriate selection of the thermal measurement method on a real sample. Subsequently, a model of the light source and its simulation in the ANSYS – Maxwell 3D and Mechanical programs are created. Finally, the results of the thermal simulation and the non-contact measurement of the tungsten halogen lamp are evaluated
|
|
|
Low power electrical machines
Martinek, Radek ; Mach, Martin (referee) ; Hájek, Vítězslav (advisor)
The master’s thesis introduces various types of electric motors. Overall, it is divided into 6 chapters, which the first deals with special type of electric motors, namely: permanent magnet DC motor with coreless winding, piezoelectric motor and three phase induction motor with solid rotor. For all of these motors are introduced principles, types, advantages, disadvantages and applications. The second part of thesis deals with perspective types of motors, namely: single phase induction motor and reluctance motor. For all of these motors are introduced principles, types, advantages, disadvantages and applications. The third chapter deals with analysis parameters of single phase induction motor. The analysis is performed on a borrowed motor from ATAS company by measurement and verification using simulation program Ansys Maxwell. The fourth part discusses the possibilities of increasing the effectiveness of borrowed electric motor. The following is chapter five, which deals with increasing the efficiency of the motor by changing metal sheets. Results are verified by simulations with Ansys Maxwell and measurements on sample of electric motor. The last part presents electric motor design with new selected electric sheets with lower specific losses, but also with lower magnetic induction.
|
|
|
Methods of analysis of vibration signals
Sivera, David ; Hájek, Vítězslav (referee) ; Janda, Marcel (advisor)
The aim of the thesis is to focus on the different methods of analysis of vibration signals. Focusing on the physical fundamentals of vibrations and a description of their origin in an electrical machine. Describe the vibration sources from mechanical across the electromagnetic to the aerodynamic. Defining the current defects of electric machines and sensors suitable for the measurement of vibrations in an electric machines. Introduction to the methods of analysis of vibration signals in the time and frequency domain. Then using some of these methods for the analysis of vibration signals measured asynchronous motors with different manufacturer defined production defect. The conclusion is composed from the comparison between measured and analyzed results.
|
|
|
Influence of rotor slots number on a small induction motor losses
Palsovics, Norbert ; Hájek, Vítězslav (referee) ; Mach, Martin (advisor)
The aim of this semester work is to analyze the losses of induction motor, according to their measure, use programs using the finite element method for the detection of the motor and the subsequent evaluation and comparison of the results obtained. The first part deals with the general AM, losses and measure their losses. The next section is very Lossmeasurement submitted asynchronous motors. The measured two machines have different characteristics in the sheet. The following section is calculating the losses using the finite element method using ANSYS Maxwell and RMXprt.The next part is the analysis of motor losses with a different number of rotor bars. This section is addressed to the models developed and validated by measuring the actual machine.
|
|
|
DC motors for general purposes.
Randa, Daniel ; Mach, Martin (referee) ; Hájek, Vítězslav (advisor)
This work deals with innovation DC permanent magnet motor for low power. The work is divided into three tasks. The first part is to survey serially produced DC motors. The second part is to choose one particular DC motor drawn from the survey and carry out its analysis and detailed description. The last part is to design innovations to selected DC motor.
|
guest ::
RSS feed.