|
|
Retractible landing gear design for Z 143 LSi airplane
Gregor, Jiří ; Vaněk, František (referee) ; Píštěk, Antonín (advisor)
The diploma thesis deals with the design of the replacement the Z 143 LSi landing gear with the new VUT 100 type landing gear in a retractable system. The first part of this thesis is devoted to the description of the Z 143 LSi aircraft and its landing gear and the description of the retractable landing gear type VUT 100. The next part describes the possible variants of the installation the VUT 100 landing gear, which are critically evaluated. Then there is selected the final variant for the installation, which is designed in Catia V5 software. The final design includes remotorization with Lycoming IO-390 and new design of engine bed. For the proposed solution, a new mass analysis with the calculation of centrations, new cases of ground load, a new flight envelope of load and additional cases of load of a new engine bed are prepared. The proposed engine bed is analyzed by the finite element calculation method in the MS Patran software. Finally, a possible scheme of the chassis retraction system is proposed.
|
|
|
Mechanical-biological waste treatment techniques
Wildová, Kristýna ; Gregor, Jiří (referee) ; Kropáč, Jiří (advisor)
This bachelor’s thesis focuses on description of various possibilities of municipal waste treatment in czech waste management system, focusing on potential realisation of mechanical-biological treatment of waste (MBT) in our area. Data analysis of foreign MBT units is included in the thesis, based on this analysis three different model layouts of technology were specified. The findings from foreign MBT units are then being used to creation and setting of a calculation tool, which is the main result of this thesis. The tool is based on residual waste composition and production data and it is able to estimate attainable production and presumptive parameters of MBT technology products.
|
|
|
Effective management of biological waste
Petříčková, Alena ; Ferdan, Tomáš (referee) ; Gregor, Jiří (advisor)
Theoretical part of present study gives a comprehensive overview of the methods used for the disposal of biodegradable waste with emphasis placed on highly effective techniques. Composting process is studied in detail and machinery used is thoroughly described. Acquired information from extensive research was applied to create a model of composting plant. Operation manual for this specific model forms part of the study. Afterwards various decomposing scenarios are analyzed and their economic sustainability is evaluated.
|
|
|
Recoverability of municipal waste plastics
Jedličková, Kateřina ; Gregor, Jiří (referee) ; Kropáč, Jiří (advisor)
The main aim of this bachelor thesis is identification of running costs and economical claims connected with production of secondary raw materials from separated plastic waste. It also includes a comparison between treatment of separated plastic waste and treatment of plastics that occur together with residual mixed municipal solid waste.
|
|
|
Trends in geographical information systems applications in waste management
Polášek, Marek ; Gregor, Jiří (referee) ; Pavlas, Martin (advisor)
The objective of this bachelor thesis is explanation of geographical information system issue and their application in waste management. The first part introduces the concepts of geographical information system and waste management, second part deals with usual GIS applications in waste management including the perspective trends, third part contains the overview of existing GIS software solutions and platforms including the mobile apps. Fourth part presents the specific design of GIS system for waste management.
|
|
|
The ocean cleaning technology concepts
Jedličková, Kateřina ; Kropáč, Jiří (referee) ; Gregor, Jiří (advisor)
The main aim of this master's thesis is the world ocean pollution by plastic waste. The introductory part of the thesis contains general information about the production of plastics and plastic waste, followed by data on ocean pollution by plastic waste including the estimated amount, pollution sources, and composition. Part of the thesis consists of the introduction of known concepts that are already actively looking for a solution to marine waste and of their mutual comparison. The following part deals with the plastic waste management, the possibilities of its treatment and utilization. The last area is the draft of an alternative system that is focused on an effective solution in accordance with environmental aspects. Within this draft, a material and economic balance is made.
|
|
|
Effective management of plastic waste
Kostková, Kateřina ; Pavlas, Martin (referee) ; Gregor, Jiří (advisor)
The main content of the submitted diploma thesis is the implementation of analysis of separated plastic waste and examination of the issue of extrusion tests. The practical knowledge is preceded by a search of waste management in the Czech Republic and get acquainted with the issue of polymer materials. The research is about plastic waste management and preparation of polymeric materials for extrusion tests. Theoretical knowledge is then applied in the practical implementation of extrusion tests.
|
|
|
Insulation influence on heat consumption
Gregor, Jiří ; Bokišová, Lenka (referee) ; Hejčík, Jiří (advisor)
The aim of this bachelor thesis is to analyzethe energy budget of a house before and after heat cladding and to assess whether the heat cladding is perspective, if the invested money returns and to show the main advantages and disadvantages of cladding. Measured values from 1992 to 2012 are used in this thesis. Heat cladding in our house was done at the turn of 2003-2004 and in the same yearsthe old wood windows were replaced with new plastic ones.
|
|
|
Secondary raw materials production from municipal waste
Kouřil, Čeněk ; Gregor, Jiří (referee) ; Kropáč, Jiří (advisor)
The main purpose of the bachelor thesis is to give an overview of the current system of municipal waste management and to demonstrate its techno-economical demands. To solve these objectives, an analysis of the current state in Czech Republic was carried out and a calculation tool was created to evaluate the overall techno-economical balance of the management system at the regional level. The results of the tool showed that it is expensive for municipalities to carry out waste management activities and would not be feasible without complex subsidies. The reader gets a basic overview of the current waste management system in Czech Republic and acquires knowledge of its partial techno-economical costs.
|
|
|
Effective proposal and operation of recycling line as an element in waste management
Dufka, Martin ; Janošťák, František (referee) ; Gregor, Jiří (advisor)
This master thesis deals with the current situation of waste management of material usable municipal waste with focus on various fractions of plastics. The theoretical part summarises the legislation of waste treatment, also contains an analysis of the current situation of waste management in the Czech Republic and comparison the situation in the European Union. In the next part of thesis are described basic fractions of plastics and their properties. There are mentioned the current problems with plastics processing and the risks of leakage to the environment. Furthermore, a complex chain of plastic waste reprocessing is described, since the inception of plastics waste to the manufacture of products made from recycled plastics. The most attention is paid to the discription of recycling plant, where the output material from sorting lines is reprocessed into a secondary material in the form of flakes or granules. Also this part is focused on the technology of recycling line and the individual devices are described. In the practical part of the thesis is created techno-economic model of recycling line with the aim of its use for balance calculations of recycling and also economic evaluation. As a part of the model was made a market research of secondary raw materials with a focus on price development. Subsequetly, sensitivity analyzes of selected parameters are applied to the model and the impact of scenarios on the economic results are evaluated.
|
guest ::
RSS feed.