|
|
Civic amenities building
Plášková, Věra ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The thesis deals with the design of a two-storey L-shaped smart building for amenities with a low energy consumption concept in mind. The ground floor will be used as a café and technical facilities. The second floor is designed for a small design office. The first part of the thesis is devoted to the architectural and structural design. The selected load-bearing system is a wall system made of Silka sand-lime blocks. The floor and roof are designed of prestressed reinforced concrete panels Spiroll. Stone wool is used as the main thermal insulation. The flat roof is designed green extensive. The second part of the thesis deals with the building environment technology, which will use energy from photovoltaic panels and will be supplied with heat from a local central heat source. Air exchange is provided by two HVAC units. Cooling is designed as a VRF system with refrigerant. The third part of the thesis deals with the acoustic assessment. The main topic is optimizing the reverberation time in the open space office. For the preparation of the thesis, the Archicad and Autocad software, MS Excel and Word or Deksoft were used.
|
|
|
Civic amenities building
Matulíková, Monika ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The aim of this master thesis is to design a new building of a nursing home with private garden and car park in Kroměříž. It is a two-storey building, without basement covered with a flat green roof with solar and photovoltaic panels. The building is divided in two parts. The southern part includes residential units (10 single units and 4 double units). The ground floor of the northern part includes dining room, a kitchen, staff premises and utility room and first floor includes further staff premises. Both parts are connected by a hall with stairs and an elevator. The vertical load-bearing structures are designed from sand-lime blocks. The horizontal load-bearing structures, stairway and elevator shaft are designed from cast-in-place reinforced concrete. The envelope is insulated with mineral wool. The building will be heated and cooled with a heat pump. It will also have a mechanical ventilation system with heat and cold recovery and root zone greywater treatment plant. The thesis is carried out in Autodesk Revit 2020, Autodesk AutoCAD, Lumion and DEKSOFT software. All structures comply with the valid standards and regulations.
|
|
|
Civic amenities building
Netopilíková, Markéta ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The aim of master‘s project is to design a new building of the office building in the cadastre area of Rohatec. The project is divided into three parts. The first part deals with the design of environment friendly and sustainable building. The second part is focused on the design of building services and the processing of building energy services. The third part is focused on the modeling of the noise study, the assessment of the soundproofing of the external cladding and the assessment of the reverberation time.
|
|
|
The sports centre
Špaček, Luděk ; Třeštíková, Jana (referee) ; Berková, Petra (advisor)
The subject of this thesis is sports centre, which servers for sport and relax. The building is in town Okříšky, location U Stadionu, region Třebíč. It is three-floor building in basement there is technology for pools, on the 1´st floor, there is entrance, cloakroom, sanitary facilities, technical facilities and facilities for staff, on the 2nd there is snack bar and fitness. Irregularly-snaped Floor plan. The object (part of cloakroom and fitness) is designed from load cast-in-place concrete frame with clay masonry thickness 300 mm, floor structure-reinforced concrete joist floor, insidle load walls thickness 300 mm, thermal insulation of externall wall by system ETICS – thickness 200 mm, foundation construction – pads with grillages, load wall in the 1st floor is from reinforced concrete thickness 300 mm, roofing with warm flat roof and one mono-pitched roof from glued laminated girder. Part of swimming hall is made of load reinflorced concrete columns, supported by foundation pads, column braced by beams, clay masonry thickness 300 mm, load external wall of reinforced concrete thickness 500 mm, thermal insulation ETICS 200 mm, roofing of the hall with glued laminated girder – roof type compact.
|
|
|
Object of civic amenities
Hasoň, Václav ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The diploma thesis elaborates on the design of a new building of freestanding retirement home in the town of Litomyšl. The design of the retirement home is in the form of project documentation for the construction. The new building includes a partial basement and three floors. The main purpose is to build a building for housing with flats for seniors and to provide health care to seniors living here and from the surrounding area. On the 1st floor, there is an administrative part, a doctor's office with the possibility of rehabilitation and a dining room with facilities for food preparation, which is imported into the home. The dining room serves both the guests and the public. The remaining part of the first floor consists of social, administrative and utility rooms. On the 2nd and 3rd floors, there are individual apartments for clients with a common room for visits and spending their free time. On the 1st floor, there is a maintenance center, boiler room, server room, furniture store, and estate depository. Basement walls are monolithic, made of reinforced concrete. The construction system of the above-ground floors is wall-mounted, bidirectional and made of ground brick blocks. The ceilings and staircases are monolithic, made of reinforced concrete. External walls are insulated with a contact thermal insulation systems. The building is mainly based on footings or foot anchors. The retirement home is located on the edge of the town near the Litomyšl Hospital. The land is suitable for construction, as it is located in the area for the construction of civil buildings.
|
|
|
The facilities
Kopecký, Tomáš ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
This diploma thesis presents processing of the design documentation for public service building. The scope of this work is in accordance with ordinance 499/2006 and latter amended 62/2013. There is a small brewery in the building, as well as a pub, tourist apartments and the owner's flat. Building is situated in Vranová, Blansko district. It is a three-story building without basement, roofed with flat and mono-pitched roofs. The ground floor consists of a pub, a brewery and a communication wing dividing the building in the middle. The second floor consists of hostel type tourist apartments with shared facilities. The third floor belongs exclusively to the owner of the building who has an apartment there. The building is bricked, complemented by an external thermal insulation composite system (ETICS). Floor structure consists of SPIROLL panels. Design documentation was developed in AutoCAD software.
|
|
|
Family house with a business plan
Šesták, Tomáš ; Šuhajdová, Eva (referee) ; Berková, Petra (advisor)
Bachelors thesis solves design a house with a business plan. Family house is located on a land parcel number 6180 in Skalica, in Vinohrady Kolébky. Building area is 157.2 square meters. The building has two floors, the basement. The house is for 4 people, and the basement will serve as a facility for small wineries, the orientation of the rooms south, north and west. Perimeter, internal bearing and non-bearing walls in the ground floors are designed from Ytong walling system in the basement are the supporting structures of concrete blocks and partition of Ytong system. Ceilings are made using joists and inserts Ytong. The family house is covered with a gable roof with hipped roof, the slope of the roof planes is 42 °. Windows, entrance and patio doors are made of wood from the manufacturer Vekra.
|
|
|
Cultural-reference centre of Trenčín
Sládok, Marcel ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The title of this master´s thesis is the elaboration of a design for a newly builded building of civil importance - a cultural center. Object is 3 storey, situated on the flat plot in the wider center of Trencin. The center includes a concert hall and facilities for training and recording musical productions. The concert hall forms the left part of the building and consists of a stage, adjacent auditoriums with 352 seats, communication spaces and backgrounds for needs of performance. On the right side there are facilities for testing and recording of music with its own facilities, an entrance hall with a café and a seating area. The construction system consists of a monolithic vertical and horizontal RC structure, complemented in a concert hall with a beam ceiling. The roof is flat in 2 levels, the facade and the envelope of the building is a combination of glass facade and the ETICS insulation system, the highest part of the building is created by cetris tiles. Drawing part is drawn in AutoCAD, other programs used (eg to calculate physical properties of structures etc.) are DEKsoft, WDLS.
|
|
|
Mountain hotel
Vlček, Jan ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The aim of this diploma thesis is to design a mountain hotel in the village Rokytnice nad Jizernou. The object is placed on a sloping plot located in an attractive touristic and skiing area of mountain range Krkonoše. The mountain hotel has 4 floors and a basement. In the First floor there is a restaurant with a terrace, kitchen and administrative facilities of hotel. In the second and third floor we can find guest rooms and room for the hotel staff. In the basement there is wellness, technical facilities and garage compound. Construction of building is made of the reinforced concrete monolithic transverse frames with beam filling of ceramic block.
|
|
|
Family house in Sirákov
Jaroš, Ondřej ; Hofman, Petr (referee) ; Berková, Petra (advisor)
The aim of the thesis is the preparation of project documentation for construction of two-generation family house in the village Sirákov on plot number 2486/3. House located in steep terrain is suitable for housing up to two families. The building has a partial basement with a basement and two storeys. Part of the house is a garage for two cars. Fundamentals will be created from footing. The external walls are constructed of bricks Porotherm 30 Profi and insulated ETICS. Porotherm ceiling structure consists of joists POT and ceiling Miako. Inside the two-armed staircase is monolithic reinforced concrete. The roof cladding consists collar systems. On the gabled roof was elected concrete roofing Bramac.
|
guest ::
RSS feed.