|
|
SIW-Based Circularly Polarized Antenna Arrays
Špůrek, Jan ; Joler,, Miroslav (referee) ; Mazánek, Miloš (referee) ; Raida, Zbyněk (advisor)
Tato disertační práce prezentuje nový koncept kruhově polarizovaných anténních řad na bázi vlnovodu integrovaného do substrátu. Hlavní devízou konceptu je modularita, kdy je základní stavební blok řady použitelný pro tvorbu komplexnějších řad a tento blok zároveň slouží jako šablona pro návrh komplexnější struktury. Anténní řada byla simulována a experimentálně ověřena pro frekvence 17 a 60 GHz. Na základě dosažených výsledků byla odvozena metodologie pro návrh a identifikovány klíčové oblasti návrhu. Následně práce představuje techniku zvýšení šířky pásma osového poměru kruhově polarizovaných anténních řad pomoci parazitních flíčků, které jsou umístěny nad zářiče v definované vzdálenosti. Anténní řada z první části práce byla použita v simulacích a experimentálním ověření pro frekvence 17 a 60 GHz, kdy byla tato řada rozšířena o parazitní strukturu, přidávajíc další vrstvu modularity do konceptu.
|
|
|
Textile slot antenna
Špůrek, Jan ; Polívka,, Milan (referee) ; Raida, Zbyněk (advisor)
This diploma thesis is focused on design of various antenna structures, based on slot antennas, created in the wider wall of a rectangular-shaped waveguide. As the substrate, it is used a 3D textile material, while its properties are examined. They were designed structures, that operate with linear and circular polarization, and other related structures, that are used for feeding and power division. Structures are designed to operate at central frequency of 8 GHz and its vicinity.
|
|
|
Suppression of side lobes of an antenna array by unequal power distribution on the elements
Saloka, Samuel ; Mikulášek, Tomáš (referee) ; Špůrek, Jan (advisor)
This bachelor thesis is focused on the design of an antenna array with four patch antennas. In the first part, the theory of a microstrip antenna and power divider with equal and unequal power distribution on elements design are summarized. In the second part, calculations necessary for the design of the antenna and both arrays are found. The third part contains modeling, optimizations and simulation results of the individual models and consequently the assessment of the results. A summarization of the measured results as well as photo documentation of the produced structures are in the fourth part. Conclusion of the entire work and its results are deliberated in last part.
|
|
|
Waveguide-SIW transitions
Bednarský, Vojtěch ; Láčík, Jaroslav (referee) ; Špůrek, Jan (advisor)
This work deals with the design of waveguide transitions. In this work I describe two usually used types of waveguides and that is classical rectangular waveguide with standardized designation WR-10, which is designed for working frequency 94GHz. The second type will be a waveguide integrated into the substrate called SIW. In the first part, numerical models of waveguides are calculated and transitions are created. Numerical models are simulated in CST Microwave Studio. Transitions are constructed in two types. Horizontal transition and orthogonal transition. The results of the first part are obtained dimensions of parameters from numerical models and S-parameters of transition sets.
|
|
|
Antenna for in-car UWB communication
Špůrek, Jan ; Puskely, Jan (referee) ; Raida, Zbyněk (advisor)
This bachelor’s thesis is focused on the design of a wireless UWB network inside a car. The project is divided into three parts. In the first part, we describe the design of suitable antennas and feeding structures. The second part is focused on the simulation of a reciprocal communication for each type of the antenna in free space. In the third part, we investigate the effect of interference caused by near parts of the car for each type of the antenna. The results are then evaluated and the most suitable antenna is chosen for realization. The fourth part describes modifications of the antenna for SMA connector, which is necessary for measurement. In the fifth part we discuss measured results and compare them with assumptions from simulations. Results of the thesis are summarized in the conclusion.
|
|
|
SIW-Based Circularly Polarized Antenna Arrays
Špůrek, Jan ; Joler,, Miroslav (referee) ; Mazánek, Miloš (referee) ; Raida, Zbyněk (advisor)
Tato disertační práce prezentuje nový koncept kruhově polarizovaných anténních řad na bázi vlnovodu integrovaného do substrátu. Hlavní devízou konceptu je modularita, kdy je základní stavební blok řady použitelný pro tvorbu komplexnějších řad a tento blok zároveň slouží jako šablona pro návrh komplexnější struktury. Anténní řada byla simulována a experimentálně ověřena pro frekvence 17 a 60 GHz. Na základě dosažených výsledků byla odvozena metodologie pro návrh a identifikovány klíčové oblasti návrhu. Následně práce představuje techniku zvýšení šířky pásma osového poměru kruhově polarizovaných anténních řad pomoci parazitních flíčků, které jsou umístěny nad zářiče v definované vzdálenosti. Anténní řada z první části práce byla použita v simulacích a experimentálním ověření pro frekvence 17 a 60 GHz, kdy byla tato řada rozšířena o parazitní strukturu, přidávajíc další vrstvu modularity do konceptu.
|
|
|
Enhancement Of Axial Ratio Bandwidth Of Antenna Array By Parasitic Patches
Spurek, Jan
This paper summarizes the concept of a circularly polarized antenna array fitted with parasitic patches to increase its axial ratio bandwidth and compares the results of simulations and measurements taken on a reference antenna array. The measurements show a good agreement with the simulations and confirm validity of the proposed technique.
|
|
|
Circular Slot Antenna Array Printed On 3D Textile Substrate
Špůrek, Jan
In the paper, the design of an antenna array consisting of circular slots is presented. Since the antenna is expected being integrated into textile upholstery of a vehicle, a 3D textile material is considered as a substrate in the design. Metallic layers are screen-printed by a silver paste. The array is fed by a textile integrated waveguide which walls are sewed by a conductive thread. The array is designed for the center frequency of the band-group VI (8 GHz) of ultra-wideband communication channels. At the center frequency, the measured realized gain is about 10 dB, and the measured axial ratio equals to 4. The array operates with right-hand circular polarization. The design is verified by measurements.
|
|
|
Waveguide-SIW transitions
Bednarský, Vojtěch ; Láčík, Jaroslav (referee) ; Špůrek, Jan (advisor)
This work deals with the design of waveguide transitions. In this work I describe two usually used types of waveguides and that is classical rectangular waveguide with standardized designation WR-10, which is designed for working frequency 94GHz. The second type will be a waveguide integrated into the substrate called SIW. In the first part, numerical models of waveguides are calculated and transitions are created. Numerical models are simulated in CST Microwave Studio. Transitions are constructed in two types. Horizontal transition and orthogonal transition. The results of the first part are obtained dimensions of parameters from numerical models and S-parameters of transition sets.
|
|
|
Suppression of side lobes of an antenna array by unequal power distribution on the elements
Saloka, Samuel ; Mikulášek, Tomáš (referee) ; Špůrek, Jan (advisor)
This bachelor thesis is focused on the design of an antenna array with four patch antennas. In the first part, the theory of a microstrip antenna and power divider with equal and unequal power distribution on elements design are summarized. In the second part, calculations necessary for the design of the antenna and both arrays are found. The third part contains modeling, optimizations and simulation results of the individual models and consequently the assessment of the results. A summarization of the measured results as well as photo documentation of the produced structures are in the fourth part. Conclusion of the entire work and its results are deliberated in last part.
|
guest ::
RSS feed.